• Journal of Korean Physical Therapy Science
• /
• v.25 no.2
• /
• pp.47-54
• /
• 2018

Purpose: The purpose of this study was to investigate the most effective exercise position of Latissimus dorsi's activities during Pull up, Push up and Lat pull down among few positions of hand grips(pronation, Supination and neutral grip) and grip widths(30cm, 60cm) based on EMG activities. Method: 10 healthy adults were participated in this study and the surface EMG activities of the Latissimus dorsi were measured during Pull up, Push up and Lat pull down exercise according to specific hand grip and grip width positions. The maximum and mean value of Latissimus dorsi's EMG activities at all positions were recorded and analysed by ONE-WAY REAPTED ANOVA. Results: The showed that the most Latissimus dorsi's activities is during Pull up exercise. Main results are as follows 1)maximum value: For Pull up, among all studied positions, Rt Latissumus dorsi, position of Supinated grip and 60cm grip width showed strongest muscle activation based on maximum EMG value. Statistical significance was assumed at p<.05. 2)mean value: For Pull up, among all studied positions, Both Latissimus dorsi, position of pronated grip and 60cm grip width showed strongest muscle activation based on mean EMG value. Statistical significance was assumed at p<.05. Conclusion: Therefore, taking the results of this study, Pull up exercise would be the best exercise of Latissimus dorsi's activation. It is recommended to do in pronated grip position and 60cm grip width during Pull up to make body fit.

• Smart Media Journal
• /
• v.5 no.1
• /
• pp.104-113
• /
• 2016

A new design method for multi-functional pull-down menu based on stacking rules is proposed. The importance of a design point of view has been emphasized in many previous studies on web navigation. Taking technical aspects with an emphasis on programming techniques into consideration in this paper, multiple elements, which are used for constructing main menu of the pull-down menu, are capable of performing their unique functions independently in addition to basic classification function by disposing them to separated layers using stacking rules. Furthermore, the improvement of visual effects and efficiency for information navigation can be expected by implementing submenu selection-bar using animation techniques and function to automatically search submenu item. Finally, the effectiveness of the proposed method is identified by implementing multi-functional pull-down menu using CSS and jQuery.

• The Journal of the Korea Contents Association
• /
• v.16 no.11
• /
• pp.525-536
• /
• 2016

As obtaining information via the Internet has increased recently, the importance of web-based user interface more than ever is being emphasized. The purpose of this study is to improve the sliding structures of submenu in pull-down menu for improving web user interface. Animation techniques applied to the submenu of the pull-down menus that are being used at many web sites have very monotonous sliding structures. In order to solve these problems, a new sliding algorithm based on enlarging/reducing and moving animation techniques with direction control in pull-down menu is proposed. As a result, the proposed method can not only improve visual effects significantly but be also easily applied to the implementation of the web-based user interface in comparison with the previous pull-down menus. Finally, experiments on application of the proposed sliding algorithm to responsive image slider show that the proposed method can achieve good results. Further studies taking into account performance are needed to implement web-based interactive contents using the proposed method.

• Archives of design research
• /
• v.18 no.3 s.61
• /
• pp.191-198
• /
• 2005

Menu is the most common interaction tool to select and execute a specific menu item from multiple menu options. With the very rapid increasing amount of information, various new menu designs have been developed. In this research, the pull-down menu, fisheye menu and grid menu were tested to compare the performance time, error rate, simplicity, usefulness, user friendliness, and overall user preference of each menu type. The grid menu was more efficient in selection speed than the pull-down and fisheye menus when the number of menu-items was 50 and 100. The time needed to choose a menu-item with a grid menu was less affected by the size of menu. The pull-down and the grid menus were considered to be more satisfactory, simple, user friendly, and useful than the fisheye menu. 42.3 percent of subjects indicated that the grid menu was their preferred selection tool among the menus. The grid menu is an efficient and robust alternative menu choice for small and middle size menu list. Further study is required to examine the possibility of grid menu on mobile devices.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1243-1246
• /
• 2009

A novel a-Si TFT integrated gate driver circuit which suppresses the threshold voltage shift due to prolonged positive gate bias to pull-down TFTs, is reported. Negative gate-to-drain bias is applied alternately to the pull-down TFTs to recover the threshold voltage shift. Consequently, the stability of the circuit has been improved considerably.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.12
• /
• pp.198-208
• /
• 1995

BiCMOS circuit consist of CMOS part which constructs logic function, and bipolar part which drives output load. Test to detect stuck-open faults in BiCMOS circuit is important, since these faults do sequential behavior and are represented as transition faults. In this paper, proposes a method for efficiently detecting transistor stuck-open faults in BiCMOS circuit by transforming them into slow-to=rise transition and slow-to-fall transition. In proposed method, BiCMOS circuit is transformed into equivalent gate-level circuit by dividing it into pull-up part which make output 1, and pull-down part which make output 0. Stuck-open faults in transistor are modelled as transition fault in input line of gate level circuit which is transformed from given circuit. Faults are detceted by using pull-up part gate level circuit when expected value is '01', or using pull-down part gate level circuit when expected value is '10'. By this method, transistor stuck-open faults in BiCMOS circuit are easily detected using conventional gate level test generation algorithm for transition fault.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.944-947
• /
• 2005

Highly stable gate driver circuit using a-Si TFT has been developed. The circuit has dual-pull down structure, in which bias stress to the TFTs is relieved by alternating applied voltage. The circuit has been successfully integrated in 4-in. QVGA and 14-in. XGA TFT-LCD with a normal a-Si process, which are stable for over 2,000 hours at $60^{\circ}C$. The enhancement of stability of the circuit is attributed to retarded degradation of pull-down TFTs by AC driving.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.49 no.1
• /
• pp.1-7
• /
• 2012

We have developed a new gate driver circuit for liquid crystal displays using oxide thin-film transistors (TFTs). In the new gate driver, negative gate bias is applied to turn off the oxide TFTs because the oxide TFT occasionally has negative threshold voltage (VT). In addition, we employed three parallel pull-down TFTs that are turned on in turns to enhance the stability. SPICE simulation showed that the proposed circuit worked successfully covering the VT range of -3 V ~ +6 V And fabrication results confirmed stable operation of the new circuit using oxide TFTs.

• International Journal of Advanced Culture Technology
• /
• v.11 no.1
• /
• pp.296-305
• /
• 2023

The purpose of this study is to measure and compare the balance of motion between the left and right using a wearable sensor during upper limb exercise using an exercise equipment. Eight participants were asked to perform upper limb exercise using exercise equipment, and exercise data were measured through IMU sensors attached to both wrists. As a result of the PCA test, Euler Yaw(Left: 0.65, Right: 0.75), Roll(Left: 0.72, Right: 0.58), and Gyro X(Left: 0.64, Right: 0.63) were identified as the main components in the Butterfly exercise, and Euler Pitch(Left: 0.70, Right 0.70) and Gyro Z(Left: 0.70, Right: 0.71) were identified as the main components in the Lat pull down exercise. As a result of the Paired-T test of the Euler value, Yaw's Peak to Peak at Butterfly exercise and Roll's Mean, Yaw's Mean and Period at Lat pull down exercise were smaller than the significance level of 0.05, proving meaningful difference was found. In the Symmetry Index and Symmetry Ratio analysis, 89% of the subjects showed a tendency of dominant limb maintaining relatively higher angular movement performance then non-dominant limb as the Butterfly exercise proceeds. 62.5% of the subjects showed the same tendency during the Lat pull down exercise. These experimental results indicate that meaningful difference at balance of motion was found according to an increase in number of exercise trials.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.3
• /
• pp.1-6
• /
• 2011

Low-power logic gates, i.e. inverter, NAND, and NOR, are proposed employing only n-channel oxide thin film transistors (TFTs). The proposed circuits were designed to prevent the pull-up and pull-down switches from being turned on simultaneously by using asymmetric feed-through and bootstrapping, thereby exhibited same output voltage swing as the input signal and no static current. The inverter is composed of 5 TFTs and 2 capacitors. The NAND and the NOR gates consist of 10 TFTs and 4 capacitors respectively. The operations of the logic gates were confirmed successfully by SPICE simulation using oxide TFT model.