• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.1
• /
• pp.93-101
• /
• 2015

The purpose of this study is to examine the reusability of the fluff pulp recycled from paper diaper. To do this, the physical and optical properties of each handsheet made from these fluff pulp sample as well as the properties of the fiber recycled from paper diaper were analyzed and compared with those of non-recycled diaper fluff pulp samples and conventional pulp samples. These comparisons show that the characteristics of fiber such as length, width, curl, kink of the pulp recycled from paper diaper were similar to those of non-recycled diaper fluff pulp as well as to those of commercial pulp. The fine content of recycled diaper fluff pulp was lower than that of other pulp samples, while the ash content of the former was higher than that of the latter. Furthermore, it was also found that the bulk of handsheets made from the recycled fluff pulp was higher than that of other pulp samples, while the formation of the former was worse than that of the latter. The mechanical properties of the handsheet sample made from the recycled diaper fluff pulp was higher than those of the unused diaper fluff pulp and was lower that those of commercial fluff pulp and softwood tissue pulp handsheet. But, it was higher than that of hardwood tissue pulp handsheet. The optical properties of recycled diaper fluff pulp handsheet was lower than those of each handsheet samples made from other pulps due to its low fine content.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.30 no.3
• /
• pp.35-43
• /
• 2012

Internal bonding strength of printing paper was increased with sea-algae pulp treatment. Spacially, 9% contents sea-algae pulp treatment in the hardwood pulp are more effective than in the softwood pulp. Most effective mixture ratio of the raw matrials for improvement of the internal bonding strength are softwood pulp 30%, hardwood pulp 70%, sea-algae pulp 9%. Internal bonding strength is effective in more sea-algae pulp contents and softwood pulp contents and wetness.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.6
• /
• pp.72-77
• /
• 2013

Tissue and paper manufacturing companies have common problems with increasing cost of imported virgin pulp and the restriction of using woods in the forest. Possibility of using bagasse pulp for solving those problems was studied. In order to reduce the production cost and study the dependency on pulps, bagasse pulp has been studied for mixing with Sw-BKP and Hw-BKP. Optimum blending ratio of wood pulps and bagasse pulp to enhance tissue properties were analyzed. Various properties of the hand sheet after blending of wood pulp and bagasse pulp were measured. As results, the bagasse pulp could substitute the hard wood pulp with similar properties of tissue. Therefore, we judged that the bagasse pulp was suitable for replacement of the hardwood pulp.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06b
• /
• pp.355-357
• /
• 2006

The application of specialty chemicals in a pulp mill system for the purpose of problem solving or process enhancement is often demonstrated and supported by data produced in laboratory testing. Hercules Chemical Solutions Pte Ltd., a major specialty chemical supplier to the Asian pulp and paper industry, partnered with the Asian Institute of Technology (AIT) on several occasions to provide insight into the efficacy of proposed chemical treatments designed for local operating conditions and wood species. This paper presents an example of a chemically-assisted deresination project. The resulting surfactant chemistry proved to be a superior deresinator for plantation grown acacia wood and has been successfully implemented in an Asian pulp and paper mill.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.3
• /
• pp.56-62
• /
• 2012

Recycled pulp therefore play a very important role in the paper industry today as a substitute for virgin pulp. In many countries of the world, the paper industry could not exist as it does without recycled pulp. Because, this is mainly due to economic reasons. Particularly in our country, the additional reason is the scarcity of native pulpwood resources. Therefore, the use of recycled pulp is very important. This study was aimed to apply recycled pulp to textbook paper. So we made a paper containing 30% recycled pulp and investigated about print quality, such as color reproduction, trapping, contrast, dot gain, gloss and print through. The results showed that is similar to existing textbook papers.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 1999.11b
• /
• pp.84-89
• /
• 1999

Treatment with the enzyme pectinase has been reported to lower the cationic demand of thermomechanical pulp(TMP) bleached with alkaline peroxide in the laboratory. We have extended this discovery to bleached TMP produced industrially, and shown that commercial enzyme preparations can treat pulp within 15 minutes at the at the temperature and pH values prevalent in paper mills. About half of the cationic demand in the bleached pulp can be destroyed by pectinase. Dynamic drainage jar experiments show that the enzyme treatment improves the effectiveness of several cationic polymers to increase retention in the absence of retention aids or with non-ionic polymers, and does not damage the strength properties of the pulp. Pectinase could be easily incorporated into paper machine stock preparation systems to lower the charges of cationic retention aids needed in furnishes containing peroxide-bleached mechanical pulp.

• Journal of Biosystems Engineering
• /
• v.43 no.4
• /
• pp.362-368
• /
• 2018

Purpose: Self-sufficiency in paper production is desired in Nigeria. This study was aimed at evaluating the performance of a locally fabricated batch pulp digester. Methods: The pulp yields of sheaths generated as waste in the production of bamboo (Bambusa vulgaris) laminates were determined at different liquor concentrations and treatment time after preliminary experiments to ascertain the conditions under which the sheath started to pulp. Moreover, the optimum pulping conditions and fiber characteristics were determined and estimated, respectively, to ascertain the pulp fiber suitability for paper production. Results: An optimum pulp yield of 65.1% was obtained at 50% NaOH and 25% $Na_2S$ liquor concentration (w/w) when the cooking time was 4 h. The results of fiber characterization of the pulp indicated an average fiber length of 2.19 mm with a low Runkel ratio of 1.63, both of which signify the suitability of the pulp for medium quality paper production. Conclusions: Softwood pulp can be blended with the fibers to improve the strength of the produced paper; further investigation should be carried out to use other non-woody plants for pulp and papermaking.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06a
• /
• pp.51-59
• /
• 2006

The surface of various mechanical pulp fibres including thermomechanical pulp (TMP), chemithermomechanical pulp (CTMP), and alkaline peroxide mechanical pulp (APMP) fibres, were characterized using SEM, AFM, and XPS. With SEM and AFM, middle lamella material was observed to be non-fibrillar, patch-like, while fibre secondary wall was observed to have a microfibrillar structure. It was found that after the first-stage refiner, lignin-rich middle lamella remainders are present on the fibre surface of all three pulps, although most of the fibre surfaces expose microfibrillar structure. After the final-stage refining, large amounts of granules are present on the TMP fibre surface. In contrast, most middle lamella remainders remain on the surface of CTMP fibres after final stage refining and even after peroxide bleaching. XPS results have confirmed that the non-fibrillar surface material is the lignin-rich middle lamella remainder., and the remainders of middle lamella contribute to the high surface lignin concentration.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.43 no.2
• /
• pp.31-39
• /
• 2011

The applicability of arrowroots as materials for paper manufacture was investigated by evaluating the characteristics of arrowroots pulping and pulps, and the surface characteristics of paper made of arrowroots. The results is as follows. The yield of grounded pulp, alkaline pulp, grounded bleach pulp, and alkaline bleach pulp are 98.0%, 37.7%, 84.8%, and 32.5%, respectively. The extraction components in arrowroot's fibers was shown high in 1%-NaOH extraction. The amount of holocellulose and lignin were largely decreased, but a slight decrease was shown in the bleaching processes. Many shivers were shown in the grounded fibers. The amount of shivers was decreased and the single fibers were increased during the process of bleaching. The alkaline pulp and the alkaline bleach pulp showed high in the beating time and freeness than the grounded pulp and grounded bleach pulp. The conditions of sheet surface according to beating time is effected largely by the conditions of original pulp.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.29 no.1
• /
• pp.35-44
• /
• 2011

For printed electronic paper making which is high leveled dimensional stability. The furnish which is hard wood pulp and soft wood pulp, mixed with hard and soft wood pulp is added sea algae pulp. If sea algae pulp was added 15% contents, paper which is made with hard wood pulp is increased about 28% dimensional stability and soft wood pulp is increased about 32%, dimensional stability and hard wood 30% and soft wood 70% mixed pulp is increased about 40% dimensional stability.