• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.39 no.1 s.119
• /
• pp.1-7
• /
• 2007

Internal fibrillation of pulp fiber is an important factor affecting paper properties. Internal fibrillation of pulp fiber is usually introduced with several kinds of modifications of fiber by the mechanical treatment such as refining, high shear and/or high consistency mixing, etc. Unfortunately there are no standardized methods that can characterize the extent of internal fibrillation and its contribution on the paper properties. The purpose of this study is to try and find the potential methods that can characterize the internal fibrillation of pulp fiber quantitatively. Softwood bleached kraft pulp was treated with Hobart mixer to introduce the internal fibrillation without the significant fiber damage and external fibrillation. The extent of internal fibrillation was increased with the increase of mechanical treatment consistency. Several fiber properties were measured to find the potential means that could characterize and quantity the internal fibrillation. Laminated area could not be used as a means for quantifying the internal fibrillation because of the effect of swelling and the different internal fibrillation behavior at different mechanical treatment consistency. Micro and macro internal fibrillation models were proposed for describing the different behavior for the mechanical treatment at low and high consistencies of pulp. The Internal fibrillation showed good correlation with swelling of fiber wall. This trend was confirmed through the measurement of wall thickness and/or cross section area of fiber. Therefore the internal fibrillation possibly can be described as the indices indicating the change of wall thickness and/or cross section area.

• Journal of Oral Medicine and Pain
• /
• v.41 no.3
• /
• pp.85-90
• /
• 2016

Purpose: The aim of this study was to develop an automated software to extract tooth and pulpal area from sectional cone-beam computed tomography (CBCT) images, which can guarantee more reproducible, objective and time-saving way to measure pulp/tooth volume ratio. Methods: The software program was developed using MATLAB (MathWorks). To determine the optimal threshold for the region of interest (ROI) extraction, user interface to adjust the threshold for extraction algorithm was added. Default threshold was determined after several trials to make the outline of extracted ROI fitting to the tooth and pulpal outlines. To test the effect of starting point location selected initially in the pulpal area on the final result, pulp/tooth volume ratio was calculated 5 times with different 5 starting points. Results: Navigation interface is composed of image loading, zoom-in, zoom-out, and move tool. ROI extraction process can be shown by check in the option box. Default threshold is adjusted for the extracted tooth area to cover whole tooth including dentin, cementum, and enamel. Of course, the result can be corrected, if necessary, by the examiner as well as by changing the threshold of density of hard tissue. Extracted tooth and pulp area are reconstructed three-dimensional (3D) and pulp/tooth volume ratio is calculated by voxel counting on reconstructed model. The difference between the pulp/tooth volume ratio results from the 5 different extraction starting points was not significant. Conclusions: In further studies based on a large-scale sample, the most proper threshold to present the most significant relationship between age and pulp/tooth volume ratio and the tooth correlated with age the most will be explored. If the software can be improved to use whole CBCT data set rather than just sectional images and to detect pulp canal in the original 3D images generated by CBCT software itself, it will be more promising in practical uses.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.43 no.3
• /
• pp.11-20
• /
• 2011

The conditions to which pulp fibers are exposed during paper production, converting, storage, use, and recycling can induce various changes in fiber morphology, surface characteristics, and suitability for paper production by recycled fibers. Most of those changes can be described by hornification. Paper has highly hygroscopic properties which affect dimensional change by relative humidity variation of surrounding condition. The purpose of this study was to investigate the dimensional stability, moisture contents and dip elongation of handsheets at different relative humidity conditions of recycled kraft pulp and BCTMP. By using recycled fibers, dimensional stability was increased because hygroscopic properties of fibers decreased with repeated recycling treatment. Dip elongation of recycled pulp was higher than that of virgin pulp because of its weak fiber-to-fiber bonding. By recycling pulp, the relative bonded area was decreased because fiber could not swell more than virgin pulp. Dimensional stability largely depended on the equilibrium moisture contents of paper, the fiber-to-fiber bonding strength, and the relative bonded area.

• Journal of the Korean Wood Science and Technology
• /
• v.2 no.3
• /
• pp.39-41
• /
• 1974

Bastard indigo, prevailing shrub species planted in erosion control work to constitute vegetation, is proved to be usefull for pulp material other than existing usage of green manure or fuel. Pulp made from bastard indigo is good enough for filler pulp though the quality of it is not remarkably excellent. (1) Sorts of paper possible to make from this pulp. Packing paper of medium grade. (general packing paper except heavy packing) (2) Traits of this pulp as for pulp material (A) It is more preferable than annual plants in these respects, ego collection, transport and storage of pulp material, and yield, freeness and chemical consumption of pulp. (B) Annual probable production of pulp material per ha from this plant is higher than that from long-term tree species or similar to that from fast growing species. (C) Its cultivation on eroded area is welcomed and consecutive annual production of material by copice method is also proved possible.

• Restorative Dentistry and Endodontics
• /
• v.6 no.1
• /
• pp.71-75
• /
• 1980

The purpose of this study was to determine the close relation between clinical symptom and histopathologic finding in pulp. 20 samples of pulp tissue were collected from badly decayed teeth with considerable pulp vitality. Hemogram was also made with the first drop of bleedieg after total pulp extirpation (10cases) and vital pulpotomy(10cases). Histologic specimen was made routinely with extirpated pulp and stained by H&E and P.A.S. Stains. The results under microsopic examination were as follows; 1. Hemogram obtained from dental pulp with acute inflammation revealed increase of polymorphonuclear leukocyte in number, more lymphocytes and monocytes. 2. Hemogram from pulp with chronic inflammation shown the number of lymphocyte and monocyte was remarkably increased. 3. Histologi specimen obtained from teeth with severe clinical symptome showed polymorphonuclear leukocyte infiltration and the hemogram also showed polymorphonuclear leukocytes. 4. Specimen from teeth with moderate symptom showed lymphocyte infiltration and vessel dilatation underneath decayed area. Erythrocytes were massively accumulated inside of the vessel wall.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.40 no.3
• /
• pp.15-22
• /
• 2008

Properties of pulp fibers can be modified by LbL multilayering technology. We evaluated the effect of stock composition on the polyelectrolyte multilayering performance of pulp fibers in this study. Stock composition was varied with pulp type and fines content. Three types of pulp-Hw-BKP, BCTMP and KOCC-were treated with polyelectrolytes of poly-DADMAC and PSS. Fines content of stock were controlled at 0, 10, 20, 30, and 40%. Zeta potential of pulp fibers and charge demand of filtrate were evaluated. The highest adsorption ratio was obtained for BCTMP because of its shortest fiber length and highest specific surface area. Higher fines content in the stock increased the adsorption ratio of polyelectrolyte onto pulp fiber and it required a higher amount of polyelectrolyte for charge neutralization. For the pulp stock with higher fines content, a higher level of polyelectrolyte and the increased layer number were required to modify and stabilize the electrochemical properties of pulp fibers.

• Proceedings of the KACD Conference
• /
• 2003.11a
• /
• pp.586-586
• /
• 2003

In the infected immature tooth with periapical involvement, the pulp is considered to hardly exist in the canal and periapical area. Such a tooth receives apexification procedure, because revascularization of the pulp chamber is in principle not expected. Apexification is beneficial to induce further development of an apex to close the foramina, but does not promote the thickness of the entire canal wall dentin. It may be possible for the pulp to be only partially necrotic and infected when an extremely large communication from the pulp space to the periapical tissues exists with a very young tooth. If this were the case, vital pulp in the apical part of the canal could proliferate new pulp into the coronal pulp space by the successful removal and disinfection of the necrotic infected coronal pulp.(omitted)

• Journal of the korean academy of Pediatric Dentistry
• /
• v.10 no.1
• /
• pp.25-33
• /
• 1983

With electron microscope, author studied on the pulp structure of human primary tooth in shedding stage. Non-carious human primary molar teeth were selected for this study. Using standard methods, specimens were sectioned and examined by light and electron microscope, The results were as follows; 1. In coronal pulp, odontoblasts were replaced by multinucleated odontoclasts, which contained a large number of mitochondria of varying shape and vacuoles in cytoplasm. Where odontoclasts were in contact with tooth surface, the characteristic ruffled border and clear zone were observed. 2. Fibrous tissue with plentiful collagen fibers and fibroblasts was observed adjacent to the dentin in the pulp. Fibroblast contained a number of mitochondria and well-developed rough-surfaced endoplasmic reticulum. 3. Inflammatory cells were observed in the pulp and active fibroblasts could be seen between inflammatory cells. In many cases, cervical epithelium proliferated toward absorbed area. 4. Inflammatory cells consisted of a number of lymphocytes, polymorphonuclear leukocytes, plasma cells and macrophages. Macrophage containing lysosomes in digestive state or phagocyting PMN could be seen. 5. In the primary molar of delayed root resorption, odontoblast layer, zone of Weil and cell-rich zone could be seen at roof of pulp chamber and odontoblast in this area cont과ained some lipid droplets.

• International Journal of Oral Biology
• /
• v.41 no.3
• /
• pp.133-139
• /
• 2016

The ultrastructural parameters related to synaptic release of endings which are presynaptic to tooth pulp afferent terminals (p-endings) were analyzed to understand the underlying mechanism for presynaptic modulation of tooth pulp afferents. Tooth pulp afferents were labelled by applying wheat-germ agglutinin conjugated horseradish peroxidase to the rat right lower incisor, whereafter electron microscopic morphometric analysis with serial section and reconstruction of p-endings in the trigeminal oral nucleus was performed. The results obtained from 15 p-endings presynaptic to 11 labeled tooth pulp afferent terminals were as follows. P-endings contained pleomorphic vesicles and made symmetrical synaptic contacts with labeled terminals. The p-endings showed small synaptic release-related ultrastructural parameters: volume, $0.82{\pm}0.45{\mu}m^3$ ($mean{\pm}SD$); surface area, $4.50{\pm}1.76{\mu}m^2$; mitochondrial volume, $0.15{\pm}0.07{\mu}m^3$; total apposed surface area, $0.69{\pm}0.24{\mu}m^2$; active zone area, $0.10{\pm}0.04{\mu}m^2$; total vesicle number, $1045{\pm}668.86$; and vesicle density, $1677{\pm}684/{\mu}m^2$. The volume of the p-endings showed strong positive correlation with the following parameters: surface area (r=0.97, P<0.01), mitochondrial volume (r=0.56, P<0.05), and total vesicle number (r=0.73, P<0.05). However, the volume of p-endings did not positively correlate or was very weakly correlated with the apposed surface area (r=-0.12, P=0.675) and active zone area (r=0.46, P=0.084). These results show that some synaptic release-related ultrastructural parameters of p-endings on the tooth pulp afferent terminals follow the "size principle" of Pierce and Mendell (1993) in the trigeminal nucleus oralis, but other parameters do not. Our findings may demonstrate a characteristic feature of synaptic release associated with p-endings.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2000.04a
• /
• pp.39-46
• /
• 2000

In pulp and papermaking process, enzymatic treatment of pulp fibres has been a topic of increasing interest in last decade. Lots of patents, papers and research reports were published on the application of enzymes in the fields of enzymatic bleaching, deinking, slime control, pitch control, waste water treatment and fibre modification. Cellulase and hemicellulase are the principal enzymes used for the modification of fibre property. This study was carried out for determinating the behaviors of enzyme to pulp fibres. A commercial enzyme, Denimax BT which is consisted with cellulase and hemicellulase, was treated to the kraft pulp produced from domestic hardwood mixtures. Results were mainly concentrated on the behaviors of freeness, drainability and fines content of fibres, and physical properties of paper with enzyme treatment. The freeness levels and dewatering ability were developed, and the fines contents were decreased. The creation of fines were controlled by the method of pre-enzyme treatment prior to fibre beating. The mechanical strength of paper, like tensile, burst, tear strength and folding endurance, were remarkably improved by the pre-enzyme treatment.