• KSBB Journal
• /
• v.15 no.4
• /
• pp.342-345
• /
• 2000

A novel pre-purification method was developed for producing peroxidase to guarantee high purity and yield from plant cell cultures in large-scale process. This method was a simple and efficient procedure for the isolation and pre-purification of peroxidase from the biomass consisting of active clay treatment followed by cationic exchange chromatography. The use of active clay in the pre-purification process allows for rapid and efficient separation of peroxidase from interfering compounds and dramatically increases yield and purity of crude peroxidase for purification steps compared to alternative processes. This pre-purification process serves to minimize the buffer usage size and complexity of the HPLC operations for peroxidase purification. This process is readily scalable to a pilot plant and eventually to a production environment where mass production of material are expected to be produced.

• Journal of Microbiology and Biotechnology
• /
• v.11 no.2
• /
• pp.204-210
• /
• 2001

Paclitaxel can be produced in high yield and with a high degree of purify from plant cell cultures of Taxus chinensis. The complete purification method was systematically established and described. This method was an efficient procedure for the purification of paclitaxel from crude paclitaxel, consisting or reverse-phase chromatography, followed by a normal-phase chromatography. The two-stage HPLC purification scheme serves as an effective and economical approach for resolving paclitaxel from complex mixtures of taxoids, with high purify (>99%) and low impurities (<0.1%). The process is readily scalable to a pilot plant and eventually to a production environment where multikilogram quantities of material are expected to be produced. The process has been optimized to minimize solvent usage, complexity, and operating costs.

• Journal of Environmental Science International
• /
• v.29 no.6
• /
• pp.623-631
• /
• 2020

This study analyzes the effect of negative air ions on the concentration of airborne particulate matter and evaluates the expected purification efficiency of open spaces for particulate matter by investigating the amount of negative air ions generated by plants. This study establishes a negative air ion generation treatment environment, plant environment, and control environment to measure the purification efficiency of particulate matter under the conditions of each, analyzing the expected purification efficiency by designing a particulate matter purification model. Results show that the amount of generated negative air ion according to environment was negative air ion generation treatment environment > plant environment > control environment; this order also applies to the particulate matter purification efficiency. Moreover, it took 65 min for the negative ion generation treatment environment, 90 min for the plant environment, and 240 min for the control environment to reach the standard expected purification efficiency of particulate matter concentration of 960 mg/㎥ for PM₁₀. For PM_2.5, with the designated maximum concentration of 700 mg/㎥, it took 60 min for the negative ion generation treatment environment, 80 min for the plant environment, and more than 240 min for the control environment. Based on these results, the expected purification efficiency compared to the control environment was quadrupled in the negative ion generation treatment environment and tripled in the plant environment on average.

• KSBB Journal
• /
• v.21 no.1 s.96
• /
• pp.1-10
• /
• 2006

The recovery and purification of a paclitaxel from plant cell cultures is essential to commercial process. This review describes a large-scale recovery and purification method for producing paclitaxel, to guarantee high purity and yield from plant cell cultures. Also, the process of separation and purification is optimized in conjunction with a extraction step, pre-purification, purification, and polishing (drying) as an integrated process to meet final product quality requirements such as purity, residual solvents, product morphologies, impurities, bacterial endotoxin, etc. This information is very useful for production and quality control of pharmaceuticals in commercialization step.

• Journal of Environmental Science International
• /
• v.16 no.2
• /
• pp.197-202
• /
• 2007

Formaldehyde is a typical indoor air pollutant that has numerous adverse health problems in modern living conditions. Phytoremediation that use plants to remove contaminants from polluted media can be applied to improve indoor air quality. Two sets of experiments; 1) two rooms in newly built auditorium and 2) a bed room in 2-year-old apartment; were performed to investigate plant effects on indoor formaldehyde concentration. It was observed from the experiments that plant can help decontaminating formaldehyde at low concentration level (0.1 ppm) but the effects decreased considerably at hish concentration (1ppm). The purification effects of indoor plant also showed the periodic pattern due to its physiological activity. More purification was observed as increasing plant density in the bed room but the formaldehyde concentration returned the original concentration level in two days after removing plants. It was suggested from the results that air purification using plants is an effective means of reduction on indoor formaldehyde level, though, reduction of source is highly desirable when the concentration level is high. The results also suggest that introducing supplementary purifying aids and/or efficient ventilation could be considered due to periodic removal pattern of plant.

• Journal of Environmental Impact Assessment
• /
• v.14 no.4
• /
• pp.147-155
• /
• 2005

This study was designed to investigate the effect of plant as a botanical air purification on the indoor pollution by formaldehyde. Three indoor plants such as Dracaena marhginata, Spathiphyllum and Dracaena reflexa, were placed in the artificially contaminated reactor under laboratory condition. Both plant and soil effects on removal of formaldehyde from contaminated indoor air were observed. Reductions in the formaldehyde levels appeared to have been associated with soil medium factors as well as plant factors. The effect of soil on formaldehyde reduction was high in the early stage of the experiment and the results suggest that sorption could be more important factor than microbial degradation in the initial dissipation of contaminants in the soil. It was suggested that the effect of plant on formaldehyde reduction might be related to the plant species, total leaf surface area of plant, degree of contribution of soil medium, and exposed concentration level. The results of this study showed that air purification using plants is an effective means of reduction on indoor formaldehyde level, though, utilization of soil media with high sorption capacity and/or supplementary purifying aids were also suggested when the source is continuous or exposed concentration level is high.

• Journal of Environmental Impact Assessment
• /
• v.15 no.6
• /
• pp.417-423
• /
• 2006

The purification ability of indoor plants for volatile organic compounds was investigated. Philodendron selloum and Spathiphyllum sp. were tested for removal of toluene and trichloroethylene in the artificially contaminated reactor under laboratory conditions. Each plant was placed in right side of the reactor and the TCE and toluene concentration change with time were monitored. In the reactor with Philodendron, the TCE concentrations of left and right sides were compared to examine the removal effects by plant. In the reactor with Spathiphyllum, air was circulated before sampling, and thus average removal effects by plants on target VOC were observed. Both plants showed clear effects on removal of VOCs from contaminated indoor air. The removal efficiency of Philodendron and Spathiphyllum were similar and showed 30 - 46% and 31 - 47% of purification effects, respectively. The results of this study showed that air purification using plants is an effective means of reduction on indoor VOCs concentration level and reduce related health risk though, supplementary purifying aids or proper ventilation were also suggested.

• The Plant Pathology Journal
• /
• v.15 no.1
• /
• pp.34-37
• /
• 1999

Cymbidium mosaic virus (CyMV) was purified from CyMV infected orchid plant leaves by Sephacryl S-500 HR column chromatography. Partial purification was done by solubilization with Triton X-100 (alkylphenoxypolyethoxy ethanol) and precipitation with polyethylene glycol (PEG 6,000) followed by ultracentrifugation on 30% sucrose cushion. Based on the spectrophotometric analysis, 33 mg of CyMV could be obtained form 100 g of CyMV-infected orchid plant leaves. The purified CyMV represented one distinct homogeneous band by SDS-PAGE, and electron microscopy revealed that it was highly homogeneous and not fragmented. Bioassay demonstrated that the purified CyMV had a normal infectivity to Chenopodium amaranticolor and orchid plants. Based on these results, the purification method in this work could be served as an improved method for the purification of CyMV and similar viruses with good yield, high purity and native integrity.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.5
• /
• pp.863-869
• /
• 2017

In this study, the information breakdown structure of water purification plant has been made by classifying various the water purification methods and facilities. this can be utilized as a code system of computer for integrating information and analyzing quantitative of environmental impact and calculating cost of maintenance and energy consumption which was used during life cycle of water purification plant. Since the construction information contains many heterogeneous information, it is very important to have a code system for managing the integrated information. In addition, since water purification plant facilities are mainly composed of installation of facilities including many processes, a more detailed classification code is required. Therefore, in this study, the water purification breakdown structure which is not yet attempted in Korea was constructed by using facet classification system.

• Korean Journal Plant Pathology
• /
• v.14 no.6
• /
• pp.559-562
• /
• 1998

Odontoglossum ringspot virus (ORSV) was finally purified from ORSV-infected orchid plants by diethylaminoethyl (DEAE) cellulose anion exchange column chromatography. The virus was reliably eluted by potassium chloride at the concentration from 0.1 M to 0.13 M. Partial purification was done by solubilization with Triton X-100 (allkylphenoxypolyethoxy ethanol) and precipitation with polyethylene glycol (PEG; MW 8,000). The finally purified ORSV represented one distinct homogeneous band and the molecular weight of its capsid protein was about 17,500 Dalton in electrophoretic analysis. Electron microscopy showed not only intact particles ranged from 280 nm to 340 nm in length, but also segmented particles that final 140 nm to 220 nm and even disks. Enzyme-linked immunosorbent assay (ELISA) showed that final yield was 12 mg/100 g of the infected leaves. Bioassay demonstrated that the purified ORSV had the normal infectivity to orchid plants and Nicotiana glutionsa. Based on these data, anion exchange column chromatography could be efficiently applied to the purification of ORSV and other viruses similar to ORSV.