• Proceedings of the Korean Fiber Society Conference
• /
• 1988.06a
• /
• pp.34-34
• /
• 1988

The pyroelectricity of poly(vinylidenefluoride) films prepared by varying the draw ratio and the poling field was investigated. As the draw ratio and the electric field on poling of the drawn samples increased, so did the pyroelectric coefficient. But the effect of electric field on the pyroelectricity was greater than that of draw ratio. The pyroelectric and piezoelectric activities could be explained by the polarization using the thermally stimulated current. The relation between pyroelectric coefficient and piezoelectric stress constant showed a good linearity.

• Journal of the Korean institute of surface engineering
• /
• v.56 no.6
• /
• pp.380-385
• /
• 2023

In this study, an MPB PMNT system containing 0.05 to 0.10 wt.% BaTiO₃ was synthesized using a traditional chemical method and its pyroelectricity was investigated. Pyroelectricity, dielectricity, and ferroelectricity of the synthesized BaTiO₃-PMNT system were analyzed by heat treatment at 1240~1280 ℃ for 4 hours to evaluate its applicability as a pyroelectric sensor. Unlike the simple ABO₃ ferroelectric, the BaTiO₃-doped PMNT system exhibited phase transition characteristics over a wide temperature range typical of complex perovskite structures. Although no dramatic change could be confirmed depending on the amount of BaTiO₃ added, stable pyroelectricity was maintained near room temperature and over a wide temperature range. When the amount of BaTiO₃ added increased from 0.05BaTiO₃-PMNT to 0.10BaTiO₃-PMNT, the electric field slightly increased from 5.00×10³ kV/m to 6.75×10³ kV/m, and the maximum value of remanent polarization slightly increased from 0.223 C/m² to 0.234 C/m². The pyroelectric coefficients of 0.05BaTiO₃-PMNT and 0.10BaTiO₃- PMNT at room temperature were measured to be ~0.0084 C/m²K and ~0.0043 C/m²K, respectively. The relaxor ferroelectric properties of the BaTiO₃-PMNT system were confirmed by analyzing the plot of K_max/K versus (T-T_max)^γ. The BaTiO₃-doped MPB PMNT system showed a distinct pyroelectric performance index at room temperature, and the values were F_v ~ 0.0362 m²/C, F_d ~ 0.575×10^-4 Pa^-1/2.

• Applied Science and Convergence Technology
• /
• v.24 no.6
• /
• pp.215-218
• /
• 2015

A pyroelctric properties of Ni(x)-doped PMNT systems were analyzed. Modified PMNT samples were prepared using the columbite structure method. Pyroelectric current, polarization, dielectric constant and dissipation factor of Ni-doped PMNT samples were measured as a function of temperature. By adding a small amount of NiO, pyroelectricity of PMNT is increased. Unlike the normal $ABO_3$ ferroelectric, Ni-doped PMNT showed properties for relaxor ferroelectric of causing the successive phase transition over a wide temperature. The optimum conditions for obtaining compositions with improvement ferroelectric properties are a nominal addition of 0.02 mole% Ni. Also, Ni-doped PMNT ferroelectric showed excellent pyroelectric figures of merit in the vicinity of room temperature. The pyroelectric coefficient ($0.00524C/m^2K$ at $25^{\circ}C$) and figures of merit ($F_v{\sim}0.039m^2/C$ and $F_d{\sim}0.664{\times}10^{-4}Pa^{-1/2}$) of composition PMNT with 0.02 mole% Ni are comparable to the earlier reports on lead-type pyroelectrics.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.37 no.3
• /
• pp.163-170
• /
• 1988

In order to investigate the mechanism of pyroelectricity on polyvinylidene fluoride film, the observations were carried out on the characteristics of infrared spectra, thermally stimulated current and pyroelectric current. As the results obtained from the study, it was concluded that the origin for thermally stimulated current exhibited above room temperature can be attributed to hole injected from anode during poling process. Futhermore it is clarified also that the origin of pyroelectricity observed on the specimen concerned is to spontaneous polarization of CF dipole attached to molecular chain segment, however, the fraction of spontaneous polarization is largely influenced by the amount of hole injected from anode.

• Bulletin of the Korean Chemical Society
• /
• v.16 no.11
• /
• pp.1133-1134
• /
• 1995

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2000.08a
• /
• pp.41-44
• /
• 2000

최근 계측제어 시스템은 동시측정, 전사적 데이터베이스 연결, 테스트 관리와 측정장비 자원의 공유 등 점점 복잡해지고 구축 시간과 비용이 증가하는 문제점을 가지고 있다 본 논문에서는 이러한 문제점을 해결하기 위하여 그래픽 프로그래밍 언어인 HP VEE를 이용하여 네트웍 기반 실시간 가상계측제어 시스템의 구현 방법을 제안하고, 초전기(Pyroelectricity)현상을 측정하는 시스템에 적용하여 기존의 시스템 구현에 비하여 효과적인 결과를 얻었다.

• Proceedings of the KIEE Conference
• /
• 1995.07c
• /
• pp.1102-1104
• /
• 1995

This study presents the results of an investigation on the electrical characteristics of $PVF_2$ film, to be regarded as the excellent piezo and pyroelectricity, using dielectric relaxation technique by the variation of temperature and frequency. As one of the results, we confirmed that crystal form with Infrared absorption and XRD was ${\alpha}$ type and its crystalline was 59[%]. Also, the results of observation conformed to Debye theory for frequency variation of relative permitivity and dielectric relaxation. Especially, we confirmed each constant values in comparision with equation related to diffusion behavior of ion, so we obtained that activation energy was computed 17.25[kcal/mole] from the relation curve with frequency and temperature.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1992.11a
• /
• pp.118-122
• /
• 1992

In this paper, the properties of Thermally Stimulated Current was studied to understand carrier's behavior of $PVF_2$ film, to be regarded as the excellent piezo and pyroelectricity. The complex relaxation curve of Thermally Stimulated Current was divided into single relaxation style using Thermal Cleaning method. As a result of Applying the numerical method of asymtotic estimation to the divided single relaxation peak, we could calculated the physical factors related to charged particles of the specimen, more accurately.

• Journal of the Korean Vacuum Society
• /
• v.8 no.3A
• /
• pp.187-193
• /
• 1999

In this study, PVDF thin films which show the excellent piezoelectricity and pyroelectricity, are prepared by PVD (physical vapor deposition) method, and thir electrical conduction phenomena for analyses of the electrical conduction mechanism and TSC (Thermally Stimulated Current) for identification of the behavior of conductive carriers are investigated. As a result of FT-IR(Fourier Transform Infrared Spectroscopy) spectra, the crystalline phase transforms $\alpha$ type into $\beta$ type with increasing electric field. From XRD (X-Ray diffraction) analyses patterns, the degree of crystallinity increases from 49.8% to 67%, as the substrate temperature increases from $30^{\circ}C$ to $80^{\circ}C$. As a result of electrical conduction phenomena, the electrical conduction mechanism of PVDF thin films is identified as ionic conduction mechanism. From TSC analyses, there are three peaks as P1, P2, P3 with increasing temperature, and with increasing substrate temperature, the peak temperature of TSC increases and the peak intensity of TSC decreases.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.3
• /
• pp.221-228
• /
• 1998

In this study, the $\beta$-Polyvinylidene fluoride(PVDF) thin films were fabricated by physical vapor deposition method. Also, the properties of dielectric relaxation were studied to understand carrier's behavior of PVDF thin films, to be regarded as the excellent piezo and pyroelectricity. In the process of vapor deposition, the $\beta$-PVDF thin films have been fabricated under the condition of the substrate temperature at 3$0^{\circ}C$, the applied electric field at 142.8kV/cm and the pressure at 2.0${\times}10^{-5}$torr. The dielectric properties of PVDF have been studied in the frequency range 10Hz to 1MHz at temperature from 30 to $100^{\circ}C$. The relative dielectric constant of $\alpha$ and $\beta$-PVDF were 6.8 and 9.8, respectively, under a frequency of 1kHz. Such a phenomenon was caused by the decrease in intermolecular forces originated by the phase-transition from the TGTG' molecular conformation to the TT planar zig-zag conformation. And the relative dielectric constant is increased as a measuring temperature increases, because of the reduction of relaxation time caused by the decrease of intermolecular force.