• Journal of Environmental Impact Assessment
• /
• v.20 no.5
• /
• pp.601-613
• /
• 2011

This study is focused on a climate data integrity to improve water quality assessment due to the social development projects. The study is in an attempt to calculate both extreme ranges of weather data measurements and partly provide means to assess qualification of data which fall within the extremes at the 23 meteorological weather stations. Generally speaking, maximum temperature, minimum temperature, relative humidity, dew point temperature are in the range of reasonable accuracy. However, there found some outliers of the brightness sunshine hours in Cheonan station. Also some years in Gwangju, Seoul, Wonju, Busan, and Jeju never reach to their upper limit and perhaps the calibration of the equipment is doubtful. The users need to take cautions in using the brightness sunshine hour data in preparation of water resources planning and management by estimating evapotranspiration and river discharge, and/or growth rate of the algae (phytoplankton).

• Journal of Korean Society for Quality Management
• /
• v.31 no.4
• /
• pp.117-126
• /
• 2003

In order to maximize the effect of TQM in the Korean industry, quality circle activity as a bottom­up management should be expanded and revitalized. Quality circle activity can be regarded as a kind of knowledge activity where new knowledge is created and knowledge is shared in the economy. This paper proposes new metrics of intangible effect as knowledge assessment focusing on the intellectual capital aspect of quality circle activity, that may be useful for revitalizing quality circle activity from viewpoints not only of financial effect but also of intellectual capital aspect. New metrics of intangible effect consist of two factors： the intellectual capital effect and the intellectual maturity effect. In order to test the validity of new metrics, a case study of 11 companies was done. The result of the case study is that two factors as an intangible effect of quality circle activity should be evaluated to identify the total effect of quality circle activity correctly.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.11
• /
• pp.1049-1057
• /
• 2020

The shift from elite education to mass education in Vietnam has met the demand for education for everybody as well as for quality human resource talent for an emerging nation. Under the resource constraint, understanding the quality dimensions of education and its priority level is important for effective and efficient policies. This study was carried out using both qualitative and quantitative methodologies to develop quality criteria and a ranking model. Two rounds of in-depth interviews were conducted with fifteen experts in the field, who were rectors, employers, and recruitment specialists to develop the quality framework applied in Vietnamese universities under total quality management (TQM), starting from the input of the senior secondary school leavers, through a teaching process to the output. The first round of interviews were unstructured questionnaires designed to explore the main factors in quality assessment model. The second round affirmed the experts' agreement on the assessment model. Then, fuzzy logic was applied to rank eight criteria in the quality assessment model into priority order: cost, teaching and administrative staff, leadership, curriculum, student-related factors, internationalization, admissions, and campus. The results are critical for identifying the necessary actions to enhance the education quality and to further research on the optimal quality model.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2006.11a
• /
• pp.584-587
• /
• 2006

Quality assessment of the building is strongly dependent upon satisfying owner's requirements. To develop indicators for the assessment of design quality, survey on current situation of design process and analysis of Design Quality Indicator(DQI) is performed. The survey revealed that the main cause of frequent design changes is variability feature of owner's requirements. DQI, an indicator developed in UK, questionnaire encompasses questions which are relevant throughout the development stages of a building, and can be used at every key stage of the process. Further research will focus on the development of indicators for the assessment of design quality applicable to Korean market. In addition, research on the visualization method to present assessment results and supporting tools to facilitate assessment will be considered.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.2
• /
• pp.242-246
• /
• 2010

In this paper, we propose a quality assessment method of biometrics for estimating an authentication result in an user authentication system. The proposed quality assessment method is designed to compute a quality score called CIMR (Confidence Interval Matching Ratio) as a result by small-sample analysis like T-test. We use the C/MR-based quality assessment method for testing how to well draw a distinction between various biometrics in a multimodal biometric system. We also test a predictability for authentication results of obtained biometrics using the mean $\bar{X}$ and the variance $s^2$ in T-test-based CIMR. As a result, we achieved the maximum 88% accuracy for estimation of user authentication results.

• Analytical Science and Technology
• /
• v.8 no.4
• /
• pp.1079-1087
• /
• 1995

The quality of human life is directly related to the quality of the environment. To assess environmental quality we must first determine the MCLG(Maximum Contaminant Level Goal), MCL(Maximum Contaminant Level), environmental impact and so on. The MCLG is the concentration at which no known adverse health effects occur. The MCLG is determined by risk assessment identifying which process is hazardous assessing, dose-response, human exposure, and characteristics of risk. With consideration of analytical methods, treatment technology, cost and regulatory impact, the MCL is set as close to the MCLG as possible. In this way, determination of the concentration and national distribution of contaminants is important for assessment of environmental quality The analytical sciences pose potential problems in assessing environmental quality. Continuing improvement in the performance of analytical instruments and operating technique has been lowering the limits of detectability. Contaminant concentration below the detection limit has usually been reported as ND(Not-Detected) and this has often been misunderstood as equivalent to zero. Because of this, more the contaminant concentration in the past was below the detection limit, whereas contaminants can be quantified now even though the contaminant concentration might remain the same or may even have decreased. In addition, environmental sampling has various components due to heterogeneous matrices. These samples are used to overestimate the concentration of the contaminant due to large variability, resulting in excess readings for MCL. In this paper, the significance of the analytical sciences is emphasized in both a conceptual and a technical approach to environmental assessment.

• Journal of Environmental Impact Assessment
• /
• v.9 no.1
• /
• pp.13-24
• /
• 2000

This paper presents a study of water quality model applications in environmental impact statements which were submitted during recent years in Korea. Most of the applications have reported that the development projects would have significant impacts on the water quality, especially, of streams and rivers. The water quality models, however, were hardly used as an impact prediction tool. Even in the cases where models were used, calibration and verification studies were not performed and thus the predicted results would not be reliable. These poor model applications in environmental impact assessment can be attributable to the fact that there were no available model application guidelines as well as no requirements by the review agency. In addition, the expected waste loads were improperly estimated in most cases, especially in non-point sources, and the predicted parameters were not good enough to understand water quality problems expected from the proposed plans. The effects of mitigation measures were not analyzed in most cases. Again, these can be attributed to no formal guidelines available for impact predictions until now. A brief guideline is described in this paper, including model selection, calibration and verification, impact prediction, and analysis of effects of mitigation measures. The results of this study indicate that the model application should be required to overcome the current improper predictions of environmental impacts and the guidelines should be developed in detail and provided.

• Ecology and Resilient Infrastructure
• /
• v.5 no.2
• /
• pp.88-93
• /
• 2018

In-situ water quality sampling is used for accurate water quality assessment. However, in-situ water quality sampling offers limited samples and requires much time and intensive labors. Remote sensing approach has recently applied for water quality assessment. It has shown the advantage of offering a synoptic view but also more efficient and economical. In this study, we utilized Landsat Imagery to estimate the water quality of the Tamsui River basin, considered as one of the most important rivers located in the north of Taiwan. In order to monitor water quality of Tamsui River basin, a linear regression relation between the value of spectral radiance and four water quality parameters are investigated with 38 water sampling stations. Through the regression model, we could estimate river pollution index (RPI) from the predicted value of four water quality parameters. By using RPI, we can examine the pollution level of Tamsui River. The accuracy of RPI conversion of this study ranged from 32.2% to 68.2%.

• Journal of Environmental Impact Assessment
• /
• v.15 no.1
• /
• pp.45-52
• /
• 2006

The purpose of this study is to assess spatiotemporal variation of coastal water quality according to time and location changes. For this we developed numerical marine trophic index base on four water quality components (chlorophyll, suspended solids, dissolved inorganic nitrogen and phosphorus) and applied this index to the water quality data measured in the korean coastal zone for the 7-years period from 1997 to 2003. Water quality data are obtained only at selected sites even though they are potentially available at any location. Therefore, in order to estimate spatial variation of coastal water quality, it is necessary to estimate the unknown values at unsampled locations based on observation data. In this study, we used IDW (Inverse Distance Weighted) method to predict water quality components at unmeasured locations and applied marine trophic index to predicted values obtained by IDW interpolation. The results of this study indicate that marine trophic index and spatial interpolation are useful for understanding spatiotemporal characteristics of coastal water quality.

• IE interfaces
• /
• v.14 no.4
• /
• pp.409-420
• /
• 2001

In this paper, We study the development of Quality Competitiveness Assessment System(QCAS), which is a computer software developed to support the assessment criteria. It, first, describes the structure of the assessment criteria and the quality competitiveness model developed for promoting quality management. QCAS is then further explained by delineating its design, functional characteristics, and feedback from the experts. A systematic procedure is also proposed for possible application of QCAS in real world situations. Finally, This research propose a systematic procedure that can be used to apply QCAS in setting up a long-term plan for continuous quality improvement.