• Journal of Korean Society of Forest Science
• /
• v.94 no.2 s.159
• /
• pp.82-89
• /
• 2005

The purpose of this paper is to investigate index numbers by conducting various comparisons among the widely used index formulas. The comparison is considered in three ways; 1) divergences in the magnitudes of index numbers due to the use of different formulas (Laspeyres, Paasche, Fisher, and Tornqvist); 2) the effect of selection of base year (fixed-year base vs. chain-type); 3) the degree of approximation of indirect to direct quantity index. The empirical application is to sawmills and planing mills industry of U.S. using a national time series data covering years of 1948-2000. The results show that the differences between Laspeyres and Paasche index can be substantial in some cases while the difference between Fisher and Tornqvist index is minimal. We also confirm that the selection of base year can cause significant divergences, especially when the variables undergo rapid price or quantity changes over time. We find that indirect quantity index approximates direct quantity index reasonably well in U.S. sawmill industry.

• Journal of the Korean Society of Tobacco Science
• /
• v.14 no.1
• /
• pp.48-56
• /
• 1992

This studies were carried out to investigate the effects of leaf loading quantity and circulating air volume during bulk curing on the variation of physical and chemical characteristics in flue-cured tobacco. The results are as follows : 1. The content of sugar in cured leaves was decreased with more circulating air volume and leaf loading quantity at bulk curing. 2. Total nitrogen and protein nitrogen were decreased with less circulating air volume and more leaf loading quantity, while amino nitrogen was increased. 3. The contents of linolenic acid and linoleic acid were increased with more leaf loading quantity and oxalic acid and citric acid had a tendency of being increased in case of high circulating air volume. 4. In general, major aromatic compounds were increased through flue-curing. Relatively high content of solanone in case of lower air volume and less leaf loading were observed, while megastig matrienone was increased when leaf loading was small. 5. The more circulation air volume with leaf loading quantity caused lowering equilibrium moisture content and higher shatter index, which resulted in poor quality of cured leaves based on quality index, nitrogen number, taste index phillips index, and sugar-nicotine ratio.

• The Journal of Korean Obstetrics and Gynecology
• /
• v.18 no.1
• /
• pp.242-252
• /
• 2005

Purpose : This study carried out to develop the questionnaires that can measure objectively menstrual quantity and determine quantity index. Method : First, we made questionnaires to measure menstrual quantity by six question. Then we investigated 1309 women's questionnaires who has the menses. Conclusion : 1. the questionnaires that can measure objectively menstrual quantity and determine quantity index was high a correlation coefficient therefore those were used Method of Menstrual Quantity(here after MMQ) calculation. Those were added and averaged. 2. We examined correlation of calculated MMQ and women's questionnaires who has the menses therefore we got 0.30~0.47 correlation. 3. MMQ 1~3(hypomenorrhea) was 39 persons 3.19%, MMQ 4~6(normal menorrhea) was 1050 persons 85.85% and MMQ 7~10(hypermenorrhea) was 134 persons 10.96%. MMQ 4 tended to be little and MMQ 6 tended to be much. 4. MMQ confidence was high as 82% comparatively so we thought MMQ was appropriate as the measured method of menstrual quantity.

• Korean Journal of Construction Engineering and Management
• /
• v.7 no.5
• /
• pp.77-84
• /
• 2006

Indexes have played an important role as a economic indicator or performance indicator in many industries for a long time. In construction industry, indexes, or Construction Cost Index(CCI), have been used to compensate for the gap of time in Estimate Using the Historical Cost Data from Feb. 2004. CCI is composed of index formula and resources. Existing literatures had used Laspyeres Index as a index formula. And, Leontief table, the bills of quantities, and information of price surveyor were used as a resource. When applying Laspyeres formula and the resources to calculating the CCI, the problems such as double application of price fluctuation, calculating the incorrect weights, may be generated. This paper analyzed the existing economic relevant indexes as well as Laspyeres formula. Thus, feasibility of them was analyzed using three practical cases of apartments. And then, Quantity based Base Period Price Index(QBPPI) was developed to consider the characteristics of construction more accurately.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.05a
• /
• pp.109-110
• /
• 2015

Estimation of rebar quantity may be used as an index to evaluate the economic feasibility of structural designs. However, when using the software to estimate the rebar quantity, there may be some limitations such as data loss caused by human errors and estimation delays caused by increased input time, since the information on arrangement of rebar is inserted manually. To solve the problems of such quantity estimation software, it is necessary to develop a method on automatic input/output of structural design information for quantity estimation and an algorithm for accurate estimation of rebar quantity. The purpose of this study is to improve the existing rebar quantity estimation by connecting with the database on information related to rebar estimation and the algorithm for rebar estimation, in order to develop an algorithm to estimate an accurate, net rebar quantity. The study result can be used as basic data for development of software for efficient structural designs and automatic framework estimation of buildings.

• Korean Journal of Construction Engineering and Management
• /
• v.12 no.6
• /
• pp.79-92
• /
• 2011

Quantity take-off is one of the critical tasks that determine the cost of a construction project, and its result should be accurate and reliable. BIM-based quantity take-off is a very attractive process for practitioners since the quantity take-off can be done automatically in a fast and accurate way. However, the result of BIM-based quantity take-off can be varied depending on how BIM was modeled. As a project progresses, more detailed design information is getting available, and it can be expected that the degree of completeness and accuracy for the BIMbased quantity take-off is going to be improved as well. However, when estimation is performed at each stage of a project life-cycle, there is no way to measure or forecast how accurate of the quantity take-off result from the BIM data given at the current stage. Therefore, this research derived factors that affect the BIM-based quantity takeoff and developed a methodology and framework to measure and forecast the completeness of BIM-based quantity take-off. The measurement framework and index that are proposed by this research was verified and validated for their consistency and feasibility through six pilot projects.

• Journal of the Korean Chemical Society
• /
• v.31 no.2
• /
• pp.153-161
• /
• 1987

The carcinogenicity of benzenoid hydrocarbons apparently depends strongly on the topological nature of the molecule. The existance of certain regions in the structure which are known propensity of benzenoid hydrocarbons to be carcinogenic. We try to identify the correlation between the number of potentially carcinogenic bay region in each of them and the quantity of Molecular Connectivity Index for 81 benzenoid hydrocarbons. Results indicate an excellent linear correlation between the number of bay region and the quantity of molecular connectivity index except the molecular containing single bond in their structure.

• Journal of the East Asian Society of Dietary Life
• /
• v.20 no.2
• /
• pp.272-278
• /
• 2010

Various quality attributes were determined in muffins prepared using purple-colored sweet potato flour. Height of control muffins was 5.8 cm lease clarify. Height decreased with increasing quantity of sweet potato powder. Muffin volume was not appreciably affected. Moisture of control muffins was 21.84. The moisture value decreased with increasing quantity of sweet potato powder. Scanning electron microscopy examination revealed thick cell wall and rough stoma in muffins prepared with purple-colored sweet potato powder. The amount of gluten decreased as the quantity of purple-colored sweet potato powder increased. Brightness L values significantly changed as the amount of powder increased, indicative of a progressively darker product. Red index a values decreased as the quantity of purple-colored sweet potato powder increased. Yellow index b values decreased significantly in the control group as powder quantity increased. Hardness increased with increasing addition of powder, but no significant difference was evident between 6% and 9% amended samples. There were also no significant differences in springing in samples containing 3% and 6% powder but 9% powder produced a significant difference. Cohesiveness did not differ in unamended samples and samples amended with 3% and 9% powder, however a significant difference was evident in samples prepared with 6% powder. Gumminess and chewiness increased as the quantity of purple-colored sweet potato powder increased. Color did not differ appreciably in sample prepared with 3% and 9% Sample prepared with 3% additives showed the highest What? Color score? Something else? Please clarify with 6.4. There was no significant difference of the flavor in samples prepared with 3% and 6% powder, or in taste among samples prepared 3%, 6%, and 9% powder. No significant differences in texture were evident in any sample Overall acceptability was highest (7.2) in samples prepared with 3% of purple-colored sweet potato.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.6
• /
• pp.1269-1276
• /
• 2015

The methodology of utilizing Intensity-Duration-flood Quantity (IDQ) curve for flood alert and warning was introduced and its performance was evaluated. For this purpose the lumped parameter model was calibrated and validated for gauged basin data set and the index precipitation equivalent to alert and warning flood was estimated. The index precipitation and IDQ curves associated by three different Antecedant Moisture Conditions (AMCs) are made provision for various possible flood scenarios. The test basin is Wonju-cheon basin ($94.4km^2$) located in Gangwon province, Korea. The IDQ curves corresponding to alert (50% of design flood level) and warning (70% of design flood level) level was estimated using the Clark unit hydrograph based lumped parameter model. The performance evaluation showed 0.704 of POD (Probability of Detection), 0.136 of FAR (False Alarm Ratio), and 0.633 of CSI (Critical Success Index), which is improved from the result of IDQ with single fixed AMC.

• Asian-Australasian Journal of Animal Sciences
• /
• v.30 no.2
• /
• pp.275-283
• /
• 2017

Objective: An experiment was conducted to investigate the environment of the deep litter system and provided theoretical basis for production. Methods: The bedding samples were obtained from a pig breeding farm and series measurements associated with gases concentrations and the bacterial diversity as well as the quantity of Escherichia coli, Lactobacilli, Methanogens were performed in this paper. Results: The concentrations of $CO_2$, $CH_4$, and $NH_3$ in the deep litter system increased with the increasing of depth while the $N_2O$ concentrations increased fiercely from the 0 cm to the -10 cm depth but then decreased beneath the -10 cm depth. Meanwhile, the Shannon index, the dominance index as well as the evenness index at the -20 cm layer was significantly different from the other layers (p<0.05). On the other hand, the quantity of Escherichia coli reached the highest value at the surface beddings and there was a significant drop at the -20 cm layer with the increasing depth. The Lactobacilli numbers increased with the depth from 0 cm to -15 cm and then decreased significantly under the -20 cm depth. The expression of Methanogens reached its largest value at the depth of -35 cm. Conclusion: The upper layers (0 cm to -5 cm) of this system were aerobic, the middle layers (-10 cm to -20 cm) were micro-aerobic, while that the bottom layers (below -20 cm depth) were anaerobic. In addition, from a standpoint of increasing the nitrification pathway and inhibiting the denitrification pathway, it should be advised that the deep litter system should be kept aerobic.