• Communications for Statistical Applications and Methods
• /
• 제9권3호
• /
• pp.743-752
• /
• 2002

The estimation of the response curve is the important problem in the quantal bioassay. When we estimate the response curve, we determine the design points in advance of the experiment. Then naturally we have a question of which design would be optimal. As a response curve estimator, locally weighted quasi-likelihood estimator has several more appealing features than the traditional nonparametric estimators. The optimal design density for the locally weighted quasi-likelihood estimator is derived and its ability both in theoretical and in empirical point of view are investigated.

• 한국수자원학회논문집
• /
• 제44권2호
• /
• pp.145-156
• /
• 2011

본 연구에서는 자연하천의 흐름에서 흔히 발생하는 천이류, 불연속류, 마른하도로의 파의 전파 등을 포함하는 복잡한 흐름을 해석하기 위한 고정확도 2차원 수치모형을 개발하였다. 하상경사항을 효율적으로 처리하기 위해 quasi-steady wave propagation 기법을 적용하여 해당 격자에 대한 생성항의 영향을 효율적으로 반영함으로써 쌍곡선형 적분 보존형의 2차원 천수방정식을 해석하였다. Fractional Step Method를 적용한 유한체적기법의 사용을 위해 HLL Riemann 해법을 이용하여 흐름률을 계산하였고, 시간 및 공간에 대한 2차 정확도를 만족하기 위해 MUSCL 기법을 적용하였다. 2차 정확도의 사용으로 불연속지점에서 발생하는 수치진동은 TVD 기법 적용을통해 제어하였다. 개발된모형은 2차원 제방 붕괴 및 댐하류부에 구조물이 존재하는 경우의댐 붕괴 모의를 통해실측치와의 검증을 실시하였다. 또한 하류부에 역경사가 존재하는 경우의 댐 붕괴 모의를 통해 실측치와 비교함으로써 생성항의 영향에 대한 모형의 적용성을 검증하였다.

• 전력전자학회논문지
• /
• 제18권1호
• /
• pp.1-9
• /
• 2013

This paper proposes a ST(Switched Trans) quasi Z-source inverter using a Switched Trans Cell combing the characteristics of a Switched Inductor Cell and Trans. A DC link inductor of the conventional quasi Z-source inverter is alternated with Switched Trans Cell of the proposed ST quasi Z-source inverter. Trans Cell of the proposed method consists of one Trans and two diodes, and the proposed method has higher and more various boost function than the conventional quasi Z-source inverter by simply changing the turns ratio of primary and secondary of the Trans. The validity of the proposed ST Z-source inverter was confirmed by PSIM simulation and a DSP based experiment under the input voltage 48V and output phase voltage 30V. As a result, when compared with the traditional quasi Z-source inverter, the proposed method has the advantage of the low voltage stress under the same output voltage condition of the voltage.

• 한국위성정보통신학회논문지
• /
• 제12권2호
• /
• pp.28-32
• /
• 2017

본 연구에서는 컨버터를 일정한 주파수로 제어할 수 있는 쿼지 공진형 컨버터를 제안하였다. 제안된 컨버터의 스위치는 쿼지 공진형 컨버터와 유사하게 고주파에서 고효율로 동작할 수 있도록 소프트 스위칭 특성을 갖는다. 또한, 쿼지 공진형 컨버터는 출력전압의 제어를 위해 컨버터의 스위칭 주파수를 변동시키는 데 비하여 제안된 컨버터는 일정한 주파수로 PWM 제어가 가능하다. 따라서 필터설계 및 EMI 필터설계의 최적화가 가능하다. 본 연구에서는 컨버터의 스위치 모드를 해석하여 컨버터의 동작원리를 기술하고, 컨버터의 스위치가 소프트 스위칭 조건을 만족하여 고주파에서도 동작할 수 있음을 보였다. 또한, DC-DC 컨버터에 대하여 100 kHz의 스위칭 주파수로 동작시켜 컨버터가 일정한 주파수로 PWM 제어되는 특성을 비롯한 컨버터의 특성을 시뮬레이션과 실험으로 증명하였다.

• 전기학회논문지
• /
• 제66권5호
• /
• pp.772-777
• /
• 2017

In this paper, the goal of optimization design is efficiency increase and vibration optimization. For this purpose, shape optimization design was performed using Quasi-Newton method, which is one of optimization techniques, and it was verified through finite element analysis In addition, modal analysis of the stator was performed to estimate the natural frequency. through the vibration experiment, the vibration was verified for cogging torque and RMF analysis. Finally, optimal and basic models were compared and analyzed for efficeincy characteristics.

• 한국안전학회지
• /
• 제15권4호
• /
• pp.20-27
• /
• 2000

The hat shaped section members, spot welded strength resisting structures are the most energy absorbing ones of automobile components during the front-end collision. Under the static axial collapse load in velocity of 10mm/min and quasi-static collapse load in velocity of 1000mm/min, the collapse characteristics of the hat shaped section and double hat shaped section member have been analyzed by axial collapse tests with respect to the variations of spot weld pitches on the flanges. In addition, the quasi-static collapse simulations have been implemented in the same condition to the experiment's using FEM package, LS-DYNA3D. The simulated results have been verified in comparison with these from the quasi-static axial collapse tests. With the computational approaches the optimal energy absorbing structures can be suggested. Simulations are so helpful that the optimized data be supplied in designing vehicles in advance.

• Journal of Power Electronics
• /
• 제10권1호
• /
• pp.79-84
• /
• 2010

This paper presents a grid connected photo-voltaic system using a quasi-Z-source inverter (QZSI) for power stage reduction. The power stage can be reduced because of an additional shoot-through stage which is a characteristic of QZSI. Therefore, by utilizing a QZSI the system's efficiency can be increased. In this paper, for applying a QZSI to a PV system, control methods such as maximum power point tracking (MPPT), point of common coupling (PCC) current control and PWM are studied and verified through simulation and experiment. In order to explain the above controllers, the characteristics of a QZSI are first analyzed. Then the MPPT control technique with a modified P&O method, the PCC current control for the regulation of the dc-link capacitor voltage and the PWM methods for the proposed system are explained. The feasibility of the proposed algorithm is verified through simulation and experiment with a 3kW system.

• 조명전기설비학회논문지
• /
• 제26권6호
• /
• pp.16-28
• /
• 2012

This paper proposes a quasi Z-source converter(QZSC) with a diode-capacitor output filter to improve the output DC voltage boost ability. The proposed converter has the same quasi Z-source network topology compared with the conventional converter. But the proposed method is adopted a diode-capacitor filter as its output filter, since the conventional method is used an inductor-capacitor as its output filter. Under the condition of the same input-output DC voltage, the proposed method has more lower shoot-through duty ratio than the conventional method. Also, because the proposed converter has same voltage boost factor under lower shoot-through duty ratio compared with the conventional converter, the proposed converter can be operated with the lower capacitor voltage of Z-source network and the lower input current. To confirm the validity of the proposed method, PSIM simulation and a DSP based experiment were performed to acquire the output DC voltage 120[V] under the input DC voltage 80[V]. And the capacitor voltage and inductor current in Z-source network, the output voltage of each converter were compared and discussed.

• Journal of Power Electronics
• /
• 제18권6호
• /
• pp.1659-1669
• /
• 2018

An improved circulating current suppression control method is proposed in this paper. In the proposed controller, an outer loop of the average capacitor voltage control model is used to balance the sub-module capacitor voltage. Meanwhile, an individual voltage balance controller and an arm voltage balance controller are also used. The DC and harmonic components of the circulating current are separated using a low pass filter. Therefore, a multiple quasi-proportional-resonant (multi-quasi-PR) controller is introduced in the inner loop to eliminate the circulating harmonic current, which mainly contains second-order harmonic but also contains other high-order harmonics. In addition, the parameters of the multi-quasi-PR controller are designed in the discrete domain and an analysis of the stability characteristic is given in this paper. In addition, a simulation model of a three-phase MMC system is built in order to confirm the correctness and superiority of the proposed controller. Finally, experiment results are presented and compared. These results illustrate that the improved control method has good performance in suppressing circulating harmonic current and in balancing the capacitor voltage.

• Wind and Structures
• /
• 제35권2호
• /
• pp.109-120
• /
• 2022

The force coefficients of rotating plates in the acceleration stage will vary with rotation rate from 0 to stable rotation rate w₀, which are important for quasi-steady theory of plate-like windborne debris to simulate the trajectory. In this paper, a wind tunnel experiment is carried out to study the effects of geometry and the Reynolds number on the variations of mean force coefficients of rotating plates. The rotational lift coefficients are sensitive to both geometry effect and Reynolds number effect, while the rotational drag and moment coefficients are only sensitive to geometry effect. In addition, new empirical formulas for the rotational lift coefficient and moment coefficients are proposed. Its accuracy is verified by comparing the predicted results with existing test data. Based on the experimental data of rotating plates, a new rotational force model for quasi-steady theory, which can be applied to a wider scope, is proposed to calculate the trajectory of plate-like windborne debris. The results show that the new model provides a better match with the tested trajectories than previous quasi-steady theories.