• Journal of Korea Trade
• /
• v.26 no.5
• /
• pp.23-38
• /
• 2022

Purpose - This research intends to find out whether R&D cost stickiness shows differentiated aspects depending on exports in Korea. A cost behavior that indicates a lower rate of costs decrease when sales decrease than the rate of costs increase when sales increase is called cost stickiness. This sticky cost behavior is caused by considering the adjusting costs. This study aims to empirically verify that R&D cost stickiness is greater in export firms than in non-export firms. We also investigate the effect of exports on R&D cost stickiness is nonlinear. Design/methodology - We obtain data for the analysis from Kis-Value and TS2000 from 2012 to 2020. This study tests for R&D cost stickiness of exports using the cost stickiness model developed by Anderson et al. (2003) that is used in a lot of prior literature. To explore the nonlinear behavior of R&D cost stickiness we include a quadratic term of exports in our model. Findings - The results of our analysis are as follows. First, we observed that R&D costs of export firms are more sticky than that of non-export firms. Our result indicated that export firms are less likely to reduce R&D costs in decreasing sales periods in preparation for future sales recovery. Second, our empirical evidence shows that export firms view R&D costs much favorably. However, we hypothesize that the effect of export intensity on R&D costs may not necessarily be linear. Our result shows the effect of exports intensity on R&D stickiness is thus nonlinear, forming a reverse U-shaped curve. When export intensity exceeds a certain threshold, the growth rate of R&D costs appears to be viewed negatively. Firms with relatively high export intensity do not support R&D costs, viewing them as taking away firms' resources from other more productive costs. On the contrary, those with export intensity under the threshold view R&D costs as beneficial and therefore promote further R&D costs when revenue decreases. Originality/value - The results of this research can contribute academically to the expansion of empirical research on R&D cost stickiness. R&D cost stickiness varies by industry. As a result of our research, the managers of export firms recognize the importance of R&D to lead innovation. We expected that this research contributes to further studies on R&D costs and cost stickiness. Second, this research has implications from a business perspectives. Our findings of export firms' R&D stickiness suggest that export firms' managers should consider keeping the stickiness of R&D when revenue decreases because it is essential for exporting firms to maintain their R&D stickiness to secure long-term competitiveness. R&D stickiness can be used on a practical basis to emphasize the need for continuous investment in exporting firms' R&D activities.

• STI Policy Review
• /
• v.4 no.1
• /
• pp.14-26
• /
• 2013

The $1^{st}$ National Plan for Aging Society with Low Fertility, which the Korean government announced in 2006, caused the gradual increase of R&D investment in order to prepare for an aging society in Korea. This study explores if the directions and strategies of R&D projects related to aging are suitable to improve the quality of life for elderly people and establish a sustainable aging society by analyzing the features of R&D investment from 2004 to 2010. The results show that most R&D projects conducted by departments focus on the development of assistive devices for the elderly to support everyday lives. The Korean government's R&D policy to prepare for an aging society is based on the narrow interpretation of Quality of Life (QoL) in an aging society that tries to resolve the socioeconomic problems of the elderly; however, the policies have ignored the independence of active elderly individuals and the social integration of the young and elderly generations. The research shows that a paradigm shift is required from a 'Senior' to 'Aging Society' because almost 1/3 of the Korean population is over 65 years old and the expansion of the research embraces from assistive technologies for the elderly to the design of social infrastructure such as transportation, education and work.

• Journal of the Korean Society of Safety
• /
• v.26 no.1
• /
• pp.8-14
• /
• 2011

Noise and vibration are likely to disturb the sensory system of human body leading to psychological stress and thereby property damage. In this research, a cut out switch(COS) with a built-in acoustic absorber along with a COS fuse broken was developed to reduce percussion noise. This new system is based on a design approach that combines existing absorber systems: expansion type, resonator type, and acoustic absorber type silencer The noise performance of the new system was simulated using the $SYSNOISE^{TM}$ software under optimized parameters: the diameter of perforated plate 2 mm, the plate thickness 3 mm, the width of expansion room 25 mm, the impinging vortex room 14 mm, and the noise absorbtion room 10 mm. The results showed that it reduced noise by approximately 41.1 dB compared to the current systems available in the market. Furthermore, it showed reduced noise by approximately 12 dB more than a product with an acoustic absorber of the Fault Tamer(USA).

• Journal of Powder Materials
• /
• v.26 no.5
• /
• pp.395-404
• /
• 2019

Aluminum nitride (AlN) has excellent electrical insulation property, high thermal conductivity, and a low thermal expansion coefficient; therefore, it is widely used as a heat sink, heat-conductive filler, and heat dissipation substrate. However, it is well known that the AlN-based materials have disadvantages such as low sinterability and poor mechanical properties. In this study, the effects of addition of various amounts (1-6 wt.%) of sintering additives $Y_2O_3$ and $Sm_2O_3$ on the thermal and mechanical properties of AlN samples pressureless sintered at $1850^{\circ}C$ in an $N_2$ atmosphere for a holding time of 2 h are examined. All AlN samples exhibit relative densities of more than 97%. It showed that the higher thermal conductivity as the $Y_2O_3$ content increased than the $Sm_2O_3$ additive, whereas all AlN samples exhibited higher mechanical properties as $Sm_2O_3$ content increased. The formation of secondary phases by reaction of $Y_2O_3$, $Sm_2O_3$ with oxygen from AlN lattice influenced the thermal and mechanical properties of AlN samples due to the reaction of the oxygen contents in AlN lattice.

• Journal of Venture Innovation
• /
• v.4 no.3
• /
• pp.31-47
• /
• 2021

Variables such as R&D capability and organizational orientation have been dealt with in previous studies on factors that affect the success of new products/services in technology-based companies, but there have been few studies examining the causal relationship of these variables from an integrated perspective. Therefore, this study aims to analyze the effect of the organizational orientation and R&D capability of technology-based SMEs, consisting of customer orientation, innovation orientation, and competitor orientation, on the success of new products/services. In addition, we want to analyze the influence of a company's product/service competitiveness on the success of new products/services. The survey was commissioned by a research company, and 382 valid copies were analyzed by conducting a survey to corporate members in the technical job-related industry. The questionnaire analysis was performed using SPSS 26.0 and Smart PLS 3.0.Customer orientation, innovation orientation, and competitor orientation were found to have a positive effect on product/service competitiveness. It can be said that market changes in product/service competitiveness, technology improvement capability, target market analysis, etc. meet the objectives of most research projects, such as the success of new products/services. In addition, product/service competitiveness was found to have a positive effect on the success of new products/services. It can be seen that R&D capability has a positive effect on the success of new products/services and plays an important role in business expansion of SMEs. From this analysis result, it was found that the organizational orientation and R&D capability of a company have a positive effect on the success of new products/services. Based on the results of this study, implications were presented on the factors that a company must have for the success of new products/services.

• Journal of the Microelectronics and Packaging Society
• /
• v.26 no.4
• /
• pp.101-105
• /
• 2019

The adhesion reliability of the epoxy molding compound (EMC) and the printed circuit board (PCB) interface is critical to the quality and lifetime of the chip package since the EMC protects PCB from the external environment during the manufacturing, storage, and shipping processes. It is necessary to measure adhesion energy accurately to ensure product reliability by optimizing the manufacturing process during the development phase. This research deals with the measurement of EMC/PCB interfacial adhesion energy of chip package that has warpage induced by the coefficient of thermal expansion (CTE) mismatch. The double cantilever beam (DCB) test was conducted to measure adhesion energy, and the spring back force of specimens with warpage was compensated to calculate adhesion energy since the DCB test requires flat substrates. The result was verified by comparing the adhesion energy of flat chip packages come from the same manufacturing process.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.7
• /
• pp.915-921
• /
• 2020

Thermoacoustic instability caused by air conditioning in a combustion chamber has emerged as a problem that must be solved to establish a stable combustion system. Thermoacoustic instability is largely divided into primary and secondary acoustic instability. In this study, an experimental study of the effects of heat losses was conducted to investigate the mechanism of secondary acoustic instability. To generate the secondary acoustic instability, a quarter-wavelength resonator with one open end and one closed end was used, and the inside of the resonator was filled with premixed gases. Subsequently, secondary acoustic instability with downward-propagating flames could be realized via thermal expansion on the burnt side. To control heat losses qualitatively, an additional co-axial tube was installed in the resonator with air or nitrogen supply. Therefore, additional diffusion flames can be formed at the top of the resonator depending on the injection of the oxidizer into the co-axial tube when rich premixed flames are used. Consequently, secondary acoustic instability could not be achieved by increasing heat losses to the ambient when the additional diffusion flame was not formed, and the opposite result was obtained with the additional diffusion flame.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.2
• /
• pp.180-184
• /
• 2003

The intrauterine inseminator (IUI) was developed to provide the method of depositing dog semen into the uterine body instead of the vagina. The IUI consists of a vaginal endoscope, a balloon sheath, and injection catheter. When the endoscope is inserted into the vagina and the balloon expanded with air, the cervical os becomes visible so a injection catheter can be inserted through the cervix for deposition of the frozen-thawed semen. The efficacy of the IUI device was compared to intra-vaginal artificial insemination using semen that had been collected and frozen from pooled sperm-rich fraction of ejaculates collected from two Jindo dog donors. Aliquots of semen were extended with a Tris-egg yolk diluent, centrifuged, the seminal plasma removed, the pellet resuspended with the same diluent, and cooled to $5^{\circ}C$ over a 2 h period. A Tris-egg yolk-glycerol extender was added at $5^{\circ}C$; after 1 h, semen was loaded into 0.5 ml straws, and straws were frozen in LN vapor for 5 min, and immersed in LN for storage. The final sperm concentration for freezing was approximately $100{\times}10^{6}cells/ml$. The straws were thawed at $70^{\circ}C$ for precisely 6 sec, 1.5 ml Tris-egg yolk buffer at $38^{\circ}C$ added, and the 2 ml of thawed semen was used for a single insemination using the IUI device. Each bitch was inseminated at optimal insemination point, which was estimated by vaginal epithelial cells staining and progesterone concentration analysis. Use of the IUI device resulted in 21 of 26 females giving birth to 89 pups ($4.2{\pm}1.6$ pups per litter), while intra-vaginal AI resulted in 6 of 15 females whelping a total of 17 pups ($2.8{\pm}1.2$ pups per litter). We believe the IUI device is easier to use than previously described devices used for intrauterine insemination. In our experience the expansion of the balloon has a calming effect on the bitch that aids the inseminator. These results indicate that the IUI device was able to provide high fertility with 50 million frozen sperm per insemination and two inseminations.

• Publications of The Korean Astronomical Society
• /
• v.12 no.1
• /
• pp.63-84
• /
• 1997

We carried out high-resolution(FWHM=3' .3) HI 21 cm observations of the supernova remnant(SNR) PKS0607+17 and HII region S261 using Arecibo 305-m telescope. The observation was to investigate whether the high-velocity(HV) gas detected in the southern area of PKS0607+17 by Koo & Heiles(1991) is physically associated with the SNR or not. The velocity of the HV gas ranges from +64 km/s to +87 km/s, which is difficult to result from the Galactic rotation. The HV gas could be the gas accelerated by supernova blast wave. However, because the observation of Koo and Heiles(1991) was carried out using Hat Creek radio telescope(FWHM $\simeq$ 36'), the association of the HV gas with the SNR could not be investigated. Using the Arecibo HI 21cm data, we have found that the HV gas appears m the southern part of the SNR and its velocity ranges from +61 km/s to +77 km/s. But the HV gas is scattered m the whole field, not only toward PKS0607+17 but also outside the SNR Accordingly the HV gas is probably not associated with the SNR, but is accidentally aligned along the same line of sight toward the SNR. Instead we have found that HI clouds at low velocities could be possibly associated with the SNR. In Arecibo HI 21cm channel maps the HI gas seems to surround the southern boundary of the SNR at $V_{LSR}$ = +19.6 ~ +40.2 km/s. But because the region of the Arecibo HI 21cm observation is not wide enough to examine the HI gas distribution, we investigated this area using the Berkely low-latitude HI survey data(Weaver & Williams 1974) too. There we found HI gas surrounding the radio continuum boundary of PKS0607+17 at $V_{LSR}$ = +21.6 ~ +258 km/s. It is possible that this HI gas is associated with the SNR, in which case, the velocity of the SNR $V_o$ $\simeq$ +26 km/s, its distance d $\simeq$ 12.5 kpc and its radius R $\simeq$ 145 pc. If we assume that the expansion velocity is ~10 km/s, then the age of the SNR is $\sim4.4\times10^6$ years. PKS0607+17 could be one of the oldest SNRs in the Galaxy. We also studied HI propertities of the HII region S261, which is $\sim1^{\circ}$ away from PKS0607+17. There has been no high-resolution m 21 cm observational study on S261. We discovered HI cloud located at the north-eastern part of S261 at $V_{LSR}$ = +5 km/s ~ +10 km/s, which is possibly associated with the HII region. The central velocity of the HI cloud $V_{LSR}$ = +7.2 km/s and the corresponding distance d = 1.5 kpc. This velocity is comparable to the radio recombination line velocities.