• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.9
• /
• pp.1770-1776
• /
• 2011

In this study, a new method that can estimate ICG data from a subject's both hands to measure Cardiac Output under convenient sensor environment. With this aim, a grip-type electrode was implemented to measure ICG. To improve the accuracy of measurement, the regression equation was extracted using multiple bio-parameters and our result was compared with the thoracic ICG equipment(Physio Flow$^{(R)}$, PF104D, Manatec Biomedical, France), which is being used in clinics. The subjects consist of 26 men and 4 women(age in $22.0{\pm}3.32$). They are no cardiac disease. Parameters available for regression model were used gender, BMI, MBP, LVET, dZ/dt(max), distance between the measured electrodes, body impedance, and PTT. As a result of analyzing the ICG measurement value on thorax and both hands, the correlation with stroke volume, heart rate, and cardiac output was $R^2$=0.853, $R^2$=0.958 and $R^2$=0.899, respectively.

• Journal of Technology Innovation
• /
• v.26 no.1
• /
• pp.85-105
• /
• 2018

This study analyzes the economic impacts of Korean R&D expenditure on the industrial structure by technological levels using 2010~2014 Input-Output table data. The industrial structure is reclassified into 4 manufacturing industries by OECD's Technology Intensity Definition. Then, we analyzes the production-inducing and value added-inducing of those industries. As the results of the analysis, it is found that the production-inducing effect by the R&D expenditure has been higher in the middle-high and middle-low technology manufacturing and that the value added-inducing effect has been higher in the middle-high technology manufacturing. On the other hand, the production and value added-inducing effects has been lower in the high-tech manufacturing which is highest in the R&D expenditure. The above results indicate that industrial structure has not been linked with the quality ladder that expresses the enhancement of tech level through R&D expenditure. Based on these results, the policy recommendation implies that R&D expenditure should be concentrated to improve the production- and value-added effects of the high technology manufacturing in order to advance the industrial structure. However, this study has the limitation that the analyses on the dynamic-inducing effects are not carried out due to the lack of fixed capital formation data.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.26 no.3
• /
• pp.227-233
• /
• 2023

In this paper, to substitute the existing TWTA(Travailing Wave Tube Amplifier) component in small radar system, we developed the Ku band SSPA(Solid-State Power Amplifier) based on the fabrication of power MMIC (Monolithic Microwave Integrated Circuit) chips. For the development of the 500 W SSPA, the 40 W-grade power MMIC was designed by ADS(Advanced Design System) at Keysight company with UMS GH015 library, and was processed by UMS foundry service. And 70 W main power modules were achieved the 2-way T-junction combiner method by using the 40 W-grade power MMICs. Finally, the 500 W SSPA was fabricated by the wave guide type power divider between the drive power amplifier and power modules, and power combiner with same type between power modules and output port. The electrical properties of this SSPA had 504 W output power, -58.11 dBc spurious, 1.74 °/us phase variation, and -143 dBm/Hz noise level.

• Journal of Korean Society of Rural Planning
• /
• v.26 no.3
• /
• pp.57-65
• /
• 2020

Agricultural research and development (R&D) investment has contributed not only to agriculture but also to the overall economic growth of the country. The recent arrival of the fourth industrial revolution has raised the need for agricultural R&D as a preparation. Agriculture R&D is directly related to the fourth industrial revolution in the agricultural and livestock sectors that utilize big data, robots, artificial intelligence and cloud. Meanwhile, subsidies or grants are considered the most widely used means of policy. Therefore, in light of the current situation in which Chinese agriculture values R&D investment, this study attempted to analyze the dynamic relationship between variables by establishing a model of agricultural environment subsidy representing the role of government, agricultural technology progress representing existing agricultural R&D investment, agricultural income representing agricultural development and total agricultural output. The analysis results showed that each variable's reaction to the rise in China's agricultural R&D investment has a positive effect on agricultural development, in line with the theory that the investment in science and technology in the agricultural sector has a positive effect. In addition, the response of each variable to China's rising agricultural environment subsidy is shown to have a positive relationship, which can also be said to be in line with the theory that the government's market-friendly intervention is beneficial to economic development.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.23-26
• /
• 2005

This paper describes the design, construction and implementation of matrix converter based on space vector modulation technique. The matrix converter provides sinusoidal input and output wave forms, bidirectional power flow, controllable input power factor and a compact design, compared to the VSI with diode rectification stage at the input. The implemented prototype of matrix converter is built using the exclusive IGBT module and has an input filter, overvoltage protection circuit and commutation means for overcoming practical issues. The good results tested using an induction motor are also presented.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.6 s.109
• /
• pp.519-528
• /
• 2006

This thesis is regarding of fabricating wibro PAM. First of all, we need to set specification based on link budget for wibro communication circumstance in order to develop PAM, then we decided specification concerning of wibro PAM by considering TTAS_Ko_06_0082R1 which is standarded in Korea, and IEEE Std. 802. 16d/e which is international standard. We selected the Doherty structure to increase efficiency, and pre-distorter structure to increase linearity. The fabricated PAM has not only a result of $26.5dB{\pm}1.0dB$ gain characteristics and maximum of -14 dB return loss characteristics in full frequency bands and full output ranges, but also a result of 37 dBc at 4 tone IMD characteristics which is improved result of 843 and a result of 31 dBc spurious characteristics which is improved result of 5 dB at 4.77 MHz offset point in status of having 27 % efficiency in the 26 dBm high power amplifier output signal. We confirmed the suggested structure is better than others by comparing with normal structure, balanced structure and Doherty structure without predistorter.

• Journal of IKEEE
• /
• v.26 no.4
• /
• pp.722-727
• /
• 2022

In this paper, we present the design and characterization of a power amplifier (PA) monolithic microwave integrated circuit (MMIC) in the X-band. The device is designed using a 0.25 ㎛ gate length AlGaN/GaN high electron mobility transistor (HEMT) on SiC process. The developed X-band AlGaN/GaN power amplifier MMIC achieves small signal gain of over 21.6 dB and output power more than 46.11 dBm (40.83 W) in the entire band of 9 GHz to 10 GHz. Its power added efficiency (PAE) is 43.09% ~ 44.47% and the chip dimensions are 3.6 mm × 4.3 mm. The generated output power density is 2.69 W/mm². It seems that the developed AlGaN/GaN power amplifier MMIC could be applicable to various X-band radar systems operating X-band.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.2
• /
• pp.172-182
• /
• 2014

In this paper, is is presented the result of design and fabrication for X band T/R module using in active array radar. The high power RF circuit was fabricated using GaN element, so that high power and high efficiency was fulfilled comparing with the previous T/R module that have under 50 W output power for X band. Designed X band T/R module demonstrated 200 W(53 dBm) peak power, 20 us pulse width with 0.4 dB pulse droop and 20 % duty cycle. And it has characteristics of 26 dB receive gain and 4.5 dB noise figure. The structure was applied to prevent serious damage of receive path and GaN HPA by transmitting power during trasmit time of a pulse radar.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.11
• /
• pp.1743-1751
• /
• 1989

In this paper, we consider trellis-coding techniques with the convolutional encoder R=k/(k+1) for improving the reliability of digital transimission over bandlimited noisy PRS and 49-QPRS channels. Employing the R=k/(k+1) convolutional code for the PRS channel results in over 3 dB of coding gain comparing with the baseline system. The trellis-coded 49-QPRS system can be realized by combining the 9-QPRS system with the R=1/2 convolutiona code, which can be improved by over 2dB coding gain comparing with the 9-QPRS system. In additin, we study a method of avoiding the occurance of unlimited runs of identical output to prevent operation of timing error.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.12B
• /
• pp.1754-1757
• /
• 2001

In this paper, a R-band hybrid amplifier with the coplanar waveguide(CPW) and the photonic bandgap(PBG) structure is designed and fabricated. The PBG and the CPW techniques are simultaneously employed in amplifier to improve the power added efficiency(PAE) and the IMD(Intermodulation Distortion) in R-band. In this paper, the PBG structures are optimized to obtain matching network. The output impedance of amplifier and the input impedance of PBG are matched to minimize the return loss. The PAE and the IMD were improved 15% and 4.5dB compared with the conventional amplifier, respectively.