• Journal of the Korean Society for Railway
• /
• v.12 no.4
• /
• pp.499-505
• /
• 2009

This paper evaluated applicability of railroad reference points for determinating geoid heights. For this research, reference points on the Honam express raildroad which contain ellipsoid heights estimated by GPS/Leveling and orthometric heights by leveling were used. Geoid heights were calculated uisng orthometric and ellipsoid heights of 360 railroad reference points, and the RMSE's with respect to different intervals of reference points were analysed which were induced by interpolation methods. The results showed that no significant difference of RMSE's among interpolation. methods. RMSE's of 0-4km interval of reference points were determined within 2cm and 5-8km were within 3cm. Also, this research confirmed that GPS leveling with Geoid model is not auurate enough to be used for railroad surveying as yet.

• Journal of the Korean Society for Railway
• /
• v.10 no.6
• /
• pp.685-691
• /
• 2007

In this paper through Honan high-speed railroad which is planned with the north and south axis, we will verify the feasibility of the coordinate conversion using railroad control points after regarding current planned-railroad as the linear central axises. From analysis, distortion of Y axis varies 21 cm to 40 cm diminishing to a gentle straight line, distortion of X axis varies 14 cm to 29 cm. Through a revision, the deviation value between the coordinates were 6 mm to 9 mm and it satisfied the allowable error of national geographic information institute which is following ITRF (International Terrestrial Reference Frame) and cadastral boundary survey (10 cm). consequently the coordinate conversion is possible using railroad control points as common control points.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.26 no.1
• /
• pp.97-103
• /
• 2016

The sensitivity of interior noise that the passengers perceive is comparatively high in the train, and structure-borne and air-borne types of noises come into the train. In this paper, to analyze contributions of these noise sources operational transfer path analysis(OTPA) is used. OTPA has some advantages of executing the contribution rates of several sources simultaneously, and in this work, 29 points are measured while running. Transfer functions between reference measurement points and response measurement points are calculated by the singular value decomposition(SVD) and Principal component analysis(PCA) method, and the frequency characteristics of the noise source are successfully derived. Also the interior noise is predicted and compared with measurement data to show the reliability.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.12
• /
• pp.1782-1788
• /
• 2015

In this paper, analysis of the effects for construction tolerances on the current collection performance of high speed catenary system. The height of the contact wire is the geometrical position of the cantilever directly affects the current collection performance. Contact force when the height of the contact wire exceeds the construction tolerance were analyzed. As a result, the maximum contact force was analyzed to more than 350[N] that are recommended by EN50119. And when the geometrical position of the cantilever to exceeds the construction tolerance, the analysis results of uplift at the mast support points, it becomes 127[mm] that are recommended by UIC 799. If the construction tolerances exceeds the reference value, the current collection performance is deteriorated. Therefore, catenary system require high precision construction. In the future, there is a need for continuing research on the tolerance of catenary system in the actual operating state.

• Korean Journal of Remote Sensing
• /
• v.33 no.2
• /
• pp.231-242
• /
• 2017

Monitoring of facilities such as roads, dams and bridges is important for their long-term sustainable usage. It has usually suffered with safety and cost problems, which makes more frequent monitoring difficult. As an efficient and economicalsolution to these problems, one may consider the use of smartphone to capture the status of the facilities. To derive quantitative analysis results with the smartphone images for facility monitoring, one should first rectify the images in a way as automatic and economical as possible. In thisstudy, we propose such a rectification method, which rectifiessmartphone images acquired from arbitrary locations based on reference images.In the proposed method, we determine the camera extrinsic parameters of each smartphone images using the reference imagesrather than ground control points, and project the image to the target surface of the facility based on the determined camera parameters. The method were applied to test data acquired from a small dam toward water-area facility monitoring. The experimental results showed that the camera extrinsic parameters were determined with the accuracy of 5 cm and $0.28^{\circ}$ in the position and attitude. The accuracy of the distance measured from the rectified image was evaluated to 10 cm. With the rectified images, one can accurately determine the location and length of the target objects required for facility monitoring.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1141-1151
• /
• 2007

In this paper through Honam high-speed railroad which is planned with the north and south axis, we will verify the feasibility of the coordinate conversion using railroad control points after regarding current planned-railroad as the linear central axises. From analysis, distortion of Y axis varies 21cm to 40cm diminishing to a gentle straight line, distortion of X axis varies 14cm to 29cm. Through a revision, the deviation value between the coordinates were 6mm to 9mm and it satisfied the allowable error of national geographic information institute which is following ITRF (International Terrestrial Reference Frame) and cadastral boundary survey(10cm). consequently the coordinate conversion is possible using railroad control points as common control points.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.6
• /
• pp.2284-2291
• /
• 2010

In this paper, we investigate the vibration analysis of plates, using an 8-node shell element that accounts for the transverse shear strains and rotary inertia. The forced vibration analysis of plates subjected to arbitrary loading is investigated. In order to overcome membrane and shear locking phenomena, the assumed natural strain method is used. To improve an 8-node shell element for forced vibration analysis, the new combination of sampling points for assumed natural strain method was applied. The refined first-order shear deformation theory based on Reissner-Mindlin theory which allows the shear deformation without shear correction factor and rotary inertia effect to be considered is adopted for development of 8-node assumed strain shell element. In order to validate the finite element numerical solutions, the reference solutions of plates are presented. Results of the present theory show good agreement with the reference solution. In addition the effect of damping is investigated on the forced vibration analysis of plates.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.12
• /
• pp.5199-5206
• /
• 2010

In this paper, we investigate the buckling analysis of laminated composite plates, using a improved assumed natural strain shell element. In order to overcome membrane and shear locking phenomena, the assumed natural strain method is used. The eigenvalues of the laminated composite plates are calculated by varying the width-thickness ratio and angle of fiber. To improve an shell element for buckling analysis, the new combination of sampling points for assumed natural strain method was applied and the refined first-order shear deformation theory which allows the shear deformation without shear correction factor. In order to validate the present solutions, the reference solutions are used and discussed. The results of laminated composite plates under the in-plane shear loading may be the benchmark test for the buckling analysis.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.2
• /
• pp.97-104
• /
• 2018

Recently, many studies have examined UAVs (unmanned aerial vehicles), which can replace and supplement existing surveying sensors, systems, and images. This study focused on the use of UAV images and assessed the possibility of utilization in areas where it is difficult to obtain GCPs (ground control points), such as disasters. Therefore, 3D (dimensional) pointcloud data were generated using UAV images and the absolute/relative accuracy of the generated model data using GCPs and without GCPs was assessed. The results showed the 3D shape pointcloud generated by UAV image matching was proven if the relative accuracy was set, regardless of whether GCPs were used or not; the quantitative measurement error rate was within 1%. Even if the absolute accuracy was low, the 3D shape pointcloud that had been post processed quickly was sufficient to be utilized when it is impossible to acquire GCPs or urgent analysis is required. In particular, the results can obtain quantitative measurements and meaningful data, such as the length and area, even in cases with the ground reference point surveying and post-process.