• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.15 no.2
• /
• pp.209-218
• /
• 2002

The Vector Random Decrement technique has been developed as an efficient method for transforming ambient responses into free decays of linear structures. It is shown that the VRD functions nay contain as much information about the modes as the really measured free decay responses. In this paper, the theory of the VRD technique is extended by applying the concept of the mode shape ratio into the Ibrahim Time Domain modal parameter identification algorithm. The VRD function is not shifted in the correction procedures for constant time shifts of the proposed VRD technique. Thus, a number of points equal to the largest of the time shifts used in the vector triggering condition are not deleted. In the VRD functions, any influence of the input to the system is averaged out. The proposed technique is compared with the traditional VRD technique by assessment of the modal parameters. The applicability of the VRD technique has been justified through a simulation study and a study of the response of a laboratory beam model subject to ambient loads.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.15 no.3
• /
• pp.409-420
• /
• 2002

This paper proposed a technique of structural re-analysis for the evaluation of dynamic responses of bridge structure under moving loads using experimental modal results. For successful structural re-analysis, it is required to have accurate estimation techniques of the modal characteristics of bridge structures. The natural frequencies and mode shapes were identified by direct fourier analysis techniques and damping ratios by the random decrement method, respectively. An interpolation method was also proposed for the extension of mode shape measured on limited DOFs. Second, the structural reanalysis was performed using moving mass model and identified modal parameters. The results from the reanalysis show that the proposed technique is very reasonable to evaluate the actual behavior of bridge structures under moving loads.

• Journal of Korean Society of Steel Construction
• /
• v.19 no.1
• /
• pp.107-115
• /
• 2007

In this paper, the damping ratios of two methods, namely the half-power bandwidth method and random decrement method from the vibration measurement were examined. Ambient vibration tests were conducted on two steel-framed and one composite tall building ranging from 27 to 36 stories. The performance of the half-power bandwidth method was investigated using four sample sizes, such as 1024, 2048, 4096 and 8192. Damping by the half-power bandwidth method is slightly more overestimated than the random decrement method due to insufficient record length. Damping evaluation by the half-power bandwidth method was found to be enhanced when using the narrower bandwidth with long recorded data.

• Proceedings of the KIEE Conference
• /
• 1999.07c
• /
• pp.1340-1343
• /
• 1999

This Paper Presents a new analytic load decrement method for the evaluation of avoided generation costs of independent power producers (IPPs), named as probabilistic load decrement method. Unlike conventional load decrement methods, the proposed method exactly consider the random outage characteristic of a generating unit, economic dispatch order, and the resulting loss of load probability. Therefore, we can Provide the exact generation avoided costs of an IPP by applying the developed method. In the case studies, we have shown the correctness and effectiveness of the method, and compared with conventional load decrement methods.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.14 no.1
• /
• pp.77-85
• /
• 2001

본 연구에서는 차량하중에 의한 상시진동기록을 이용한 교량의 손상추정기법을 연구하였다. 즉, 차량진행 중 측정된 신호로부터 구조물의 모드특성을 구하고, 이를 이용하여 손상위치 및 손상정도를 추정하는 알고리즘을 제안하였다. 제안기법의 검증을 위하여 차량하중을 재하할 수 있는 모형교량을 제작하여 손상실험을 수행하였다. 차량진행 중 교량의 수직가속도를 계측하였으며, 측정된 가속도시계열로부터 random decrement(RD) 기법을 사용하여 자유진동신호를 구한 후, 이로부터 구조물의 모드특성을 추정하였다. 추정된 모드특성을 기초로 신경망기법을 적용하여 손상위치 및 손상정도를 추정하였으며, 추정된 결과는 실제 손상과 비교적 잘 일치하였다.

• Journal of Korean Association for Spatial Structures
• /
• v.7 no.5
• /
• pp.57-65
• /
• 2007

After measuring wind induced response for a high-rise steel building, the damping ratio and natural frequency were analyzed in this paper. In order to examine amplitude dependence, random decrement method was used. Two methods were analyzed by comparing dynamic properties from random decrement method and half powered-band width method. In addition, through serviceability evaluation during strong wind, compatibility of two methods to Japanese guidelines for the evaluation of habitability to building vibration and national building code of Canada was considered. The amplitude dependence of the damping ratio by RD method was shown and the amplitude dependence of the natural frequency was relatively very small in an aspect of engineering sense. Moreover, the measured building was satisfied with serviceability and Japanese guideline is stricter than NBCC code.

• Wind and Structures
• /
• v.21 no.2
• /
• pp.159-182
• /
• 2015

This study focuses on the amplitude dependency of damping of tall structures by the random decrement technique (RDT). Many researchers have adopted RDT to establish the amplitude dependency of damping ratios in super-tall buildings under strong wind loads. In this study, a series of simulated examples were analyzed to examine the reliability of this method. Results show that damping ratios increase as vibration amplitudes increase in several cases; however, the damping ratios in the simulated signals were preset as constants. This finding reveals that this method and the derived amplitude-dependent damping ratio characteristics are unreliable. Moreover, this method would obviously yield misleading results if the simulated signals contain Gaussian white noise. Full-scale measurements on a super-tall building were conducted during four typhoons, and the recorded data were analyzed to observe the amplitude dependency of damping ratio. Relatively wide scatter is observed in the resulting damping ratios, and the damping ratios do not appear to have an obvious nonlinear relationship with vibration amplitude. Numerical simulation and field measurement results indicate that the widely-used method for establishing the amplitude-dependent damping characteristics of super-tall buildings and the conclusions derived from it might be questionable at the least. More field-measured data must be collected under strong wind loads, and the damping characteristics of super-tall buildings should be investigated further.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.205-208
• /
• 2009

POD(proper orthogonal decomposition)는 가해지는 하중(입력)의 계측없이 출력(응답)만으로 구조물의 동적특성을 파악할 수 있는 기법이다. 하지만 실제의 경우 측정데이터에 노이즈가 포함되어 있으면 분해가 완전하게 일어나지 않아 동적특성(특히 감쇠비)을 완벽히 파악하기 힘들다. 본 연구에서는 이러한 문제점을 보완하기 위해서 POD기법으로 추출된 각 모드의 자유진동파형에 RD(random decrement)법을 적용하여 노이즈에 의한 영향을 제거하는 방법을 제안하였다. 본 논문에서는 먼저 수치모델을 사용하여 계측노이즈가 있을 경우 제안된 방법을 사용하면 노이즈의 영향을 감소시킬 수 있음을 검증한 후 실험실 규모의 구조물모형에서 얻은 자유진동계측치에 제안된 기법을 적용하여 시스템식별을 수행하여 동특성을 파악하였다.

• Structural Engineering and Mechanics
• /
• v.29 no.2
• /
• pp.171-186
• /
• 2008

The seismic response analysis of an existing bridge needs a mathematical model that can be calibrated with measured dynamic characteristics. These characteristics are the periods and the associated mode shapes of vibration and the modal damping coefficients. This paper deals with the measurements and the interpretation of the results of ambient vibration tests done on a newly erected cable stayed bridge across the Oued Dib River at Mila city in Algeria. The signal analysis of ambient vibration records will permit to determine the dynamic characteristics of the bridge. On the other hand, a 3-D model of the bridge is developed in order to assess the frequencies and the associated modes of vibration. This information will be necessary in the planning of the test on the site (locations of the sensors, frequencies to be measured and the associated mode shapes of vibration). The frequencies predicted by the finite element model are compared with those measured during full-scale ambient vibration measurements of the bridge. In the same way, the modal damping coefficients obtained by the random decrement method are compared to those of similar bridges.

• Proceedings of the IEEK Conference
• /
• 2002.06d
• /
• pp.219-222
• /
• 2002

In this paper, we propose a new blind image watermarking method in wavelet domain. It is necessary to find out watermark insertion location in blind watermark. We use horizontal and vertical difference of LL components to select watermark insertion location, because increment or decrement of successive components is rarely changed in LL band. A pseudo-random sequence is used as a watermark. Experimental results show that the proposed method is robust to various kinds of attacks such as JPEG lossy compression, averaging, median filtering, resizing, histogram equalization, and additive Gaussian noise.