• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.1523-1526
• /
• 2002

In this paper, we propose a method fur measuring the dimensions of an arbitrary object using geometric relationship between a perspective projection image and a rectangular parallelepiped model. For recognizing the vertexes of the rectangular parallelepiped surrounding an arbitrary object, the method adopts a strategy that derives the equations for vertex recognition from the geometrical relationships for image formation between 2D image and the rectangular parallelepiped model. extracts from 2D image with vertical view features (or junctions) of minimum quadrangle circumscribing an arbitrary shape object, and then recognizes vertexes from the features with the equations. Finally, the dimensions of the object are calculated from these results of vertex recognition. By the experimental results, it is demonstrated that this method is very effective to recognize the vertexes of the arbitrary objects.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.11
• /
• pp.1622-1629
• /
• 2002

To enhance isothermal characteristics of glass-farming surface, a rectangular parallelepiped heat pipes was fabricated, tested, and analyzed. The working fluid was sodium and the wall material was stainless steel 304. The dimension of the heat pipe was 210 (L) $\times$ 140(W) $\times$ 92(H)mm. A lattice structure covered with screen mesh was inserted to promote return of working fluid. The bottom side of heat pipe was heated electrically and the top side was cooled by liquid circulation. The temperature distribution at the bottom surface was of major concern and was monitored to determine isothermal characteristics. A frozen start-up of rectangular parallelepiped liquid metal heat pipe was tested. The operating mode of the sodium heat pipe was affected by the temperature of cooling zone, input heat flux, and the operating temperature of heat pipe. The heat pipe operated in a normal fashion as long as the heat flux was over 5.78W/cm$^2$, and the inside wall temperature of condenser part was above 95$^{\circ}C$ The maximum temperature difference at the bottom surface was observed to be 32$^{\circ}C$ when the operating temperature of the heat pipe was operating normally around 50$0^{\circ}C$. The result showed that a sodium heat pipe was very effective in reducing significantly the temperature difference in the glass-forming surface.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.15 no.2
• /
• pp.208-214
• /
• 2012

The spectral radiance received by a remote sensor is consisted of the self-emitted component directly from the target surface, the reflected component of the solar irradiance at the target surface, and the scattered component by the atmosphere without ever reaching the object surface. In general, the self-emitted component is the most important part in the infrared signatures from the target. We measured the solar irradiation, sky irradiation, air temperature, wind velocity, wind direction, relative humidity, and atmospheric pressure together with the surface temperatures of rectangular parallelepiped targets. The measured diurnal surface temperature variations on the three different rectangular parallelepiped targets constructed by the steel, aluminum and bakelite are obtained at the same time intervals. The measured surface temperature results show that the top surface temperature of bakelite recorded up tp $7.6^{\circ}C$ higher than that of aluminium and $6.1^{\circ}C$ higher than that of steel at 11 AM on the sunny condition. A complete set of measured data including the surface temperature of rectangular parallelepiped targets together with the detailed weather information can be a valuable reference for future study.

• East Asian mathematical journal
• /
• v.36 no.2
• /
• pp.291-315
• /
• 2020

In this study, the geometric model of 11 factorization formulas presented in the 2015 revised national curriculum was constructed and the necessary mathematical conditions were derived in the process. As a result of the study, all of the 11 factorization formulas are geometrically modeled and 12 conditions are derived in the process. However, the basic method of directly cutting and attaching a given shape was limited to not being able to make a rectangle or rectangular parallelepiped. Therefore, the problem was solved by changing the perspective and focusing on whether rectangle or rectangular parallelepiped with the same area or volume could be constructed.

• Journal of Mechanical Science and Technology
• /
• v.19 no.4
• /
• pp.1044-1051
• /
• 2005

The isothermal characteristics of a rectangular parallelepiped sodium heat pipe were inves­tigated for high-temperature applications. The heat pipes was made of stainless steel of which the dimension was $140\;m\;(L)\;{\times}\;95m\;(W)\;{\times}\;46 m\;(H)$ and the thickness of the container was 5 mm. Both inner surfaces of evaporator and condenser were covered with screen meshes to help spread the liquid state working fluid. To provide additional path for the working fluid, a lattice structure covered with screen mesh wick was inserted in the heat pipe. The bottom surface of the heat pipe was heated by an electric heater and the top surface was cooled by circulating coolant. The concern in this study was to enhance the temperature uniformity at the bottom surface of the heat pipe while an uneven heat source up to 900 W was in contact. The temperature distribution over the bottom surface was monitored at more than twenty six locations. It was found that the operating performance of the sodium heat pipe was critically affected by the inner wall temperature of the condenser region where the working fluid may be changed to a solid phase unless the temperature was higher than its melting point. The maximum temperature difference across the bottom surface was observed to be $114^{\circ}C$ for 850 W thermal load and $100^{\circ}C$ coolant inlet temperature. The effects of fill charge ratio, coolant inlet temperature and operating temperature on thermal performance of heat pipe were analyzed and discussed.

• Journal of KIISE:Computing Practices and Letters
• /
• v.8 no.5
• /
• pp.562-573
• /
• 2002

In this paper, we propose a method for measuring the volume of packages for the efficient handling of the packages. Using the geometrical characteristics of the rectangular parallelepiped type objects, the method measures the volume of packages with one camera only in real time. In preprocessing of volume measurement, the method extracts outer lines of the object and then crossing points of the lines as feature points or vertexes. From these cross points(-feature points-), the volume of the package is calculated. Compared to the direct feature extraction, the proposed method shows especially the blurring robust result by using the line for feature extraction. Additionally, the method can get the stable result by considering object's direction. From experimental results, it is demonstrated that this method is very effective for the real time volume measurement of the rectangular parallelepiped.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.4
• /
• pp.106-114
• /
• 1994

A new merging technique is adopted for combining rectangular parallelepipes produced by 2-D rectangular code into more intuitive 30D volume elements. Rectangular parallelepiped codes (RP codes) can be used in volume-based representation of a three-dimensional object. We proposed more regularity-conserving 2-D rectangular coding scheme to merge rectangular cells represented by RP codes in three-dimensional space. After being constructed from modified 2-D rectangular code, 3-D RP codes are merged in the two orthogonal directions using new merging algorithm. The shape of merged 3-D object reconstructed by proposed algorithm is shown to be much closer to the original object shape than that of conventional RP codes. The storage requirement of merged object can be also reduced.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.383-386
• /
• 2003

This paper deals with transmission loss of 3-dimensional rectangular plenum lined chamber. There are three kinds of rectangular plenum lined chamber: throughflow type, flow-reversal type, and end-in/side-out type. The combination of above three types of rectangular plenum lined chamber is used for the commercial HVAC system and automobile exhaust system. However, the ambiguity and complexity of sound absorbing material property and 3-dimensional property have impeded research. In this paper, the transmission loss of three kinds of rectangular plenum lined chamber is derived and calculated. The effect of increase of sound absorbing material is also considered. Analytical solution is calculated by using the locally-reacting property of sound absorbing material.

• Proceedings of the Optical Society of Korea Conference
• /
• 2001.02a
• /
• pp.60-61
• /
• 2001

We present our experimental results on the recording and retrieving of multiplexed near-field holograms using near-field scanning optical microscopy (NSOM) and a conventional rectangular-parallelepiped or cubic photorefractive crystal. Experimental results show that we can get the angular selectivity comparable with that of the volume hologram and the retrieved spot size was smaller than the Rayleigh's limit. The results also show that the angular selectivity and the retrieved spot size are strongly dependent on the recording distance between the object and the recording medium.

• Bulletin of the Korean Chemical Society
• /
• v.12 no.5
• /
• pp.544-554
• /
• 1991

Using the Huckel method, we obtain the analytical expressions for eigenvalues and eigenvectors of s.c., f.c.c. and b.c.c. clusters of rectangular parallelepiped shape, and of an arbitrary size. Our formula converage to those derived from the Bloch sum, in the limit of infinite extension. DOS and LDOS reveal that the major contribution of the states near Fermi level originates from the surface atoms, also symmetry of DOS curves disappears by the introduction of 2nd nearest neighbor interactions, in all the cubic lattices. An accumulation of the negative charges on surface of cluster is observed.