• 한국정보과학회논문지:시스템및이론
• /
• 제27권5호
• /
• pp.450-463
• /
• 2000

배열 재분산은 분산 메모리 컴퓨팅 환경에서 응용 프로그램의 수행 속도를 빠르게 하기 위해 많이 사용되고 있다. 특히 GEN BLOCK간 재분산은 동적으로 부하가 변화하는 경우 최적화된 성능을 보이기 위해 필요하다. 배열 재분산에 관한 기존 연구들은 대부분 CYCLIC(N)등과 같은 정규 분산 패턴간 재분산에 대해서만 이루어져 왔다. 그러나 GEN BLOCK등과 같은 비정규 분산 패턴간 재분산에서 발생하는 메시지패싱들은 정규 분산 패턴간 재분산과는 다른 특정을 보이기 때문에 이에 대한 새로운 연구가 필요하다. 본 논문은 GEN BLOCK간 재분산에서 발생하는 메시지패싱들에 정규 분산 패턴간 재분산에서 발견되 는 규칙성은 없는 반면 공간 지역성 (spacial locality)이 존재함을 보이고, 이를 기반으로 최소 스텝 정리와 최소 크기 정리가 재분산의 성능을 향상시키는데 중요함을 증병하였으며, 기존의 리스트 스케줄링 방식에 재구성 단계(relocation phase)를 추가함으로써 최적 스케줄을 생성하는 알고리즘을 제시하였다. 마지막으로 제안한 알고리즘의 성능을 평가하기 위해 ， CRAY T3E와 IBM SP2에서 성능 평가를 수행 하였으며， 그 결과 분산 메모리 병렬 머신에서 최소 스텝 정리와 최소 크기 정리를 만족하는 스케줄이 GEN BLOCK간 재분산의 성능 향상에 중요함을 보였다.

• 산업경영시스템학회지
• /
• 제17권32호
• /
• pp.113-120
• /
• 1994

This study presents a two level-parallel type inventory systems with one upper level facility in the first echelon and n-lower level facilities in the second echelon. The stocks at the lowest facilities can become unbalanced with the random variations in the demands. This paper deals with the imbalance by considering redistribution and backorder. The system with redistribution and the system with backorder and redistribution are analized. The comparison of two cases shows that the system with redistribution and backorder gives smaller stocks than the system with redistribution.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1997년도 춘계학술발표회논문집(2)
• /
• pp.207-213
• /
• 1997

The computational scheme on a irradiation temperature of U-10Zr fuel was established considering porosity formation, bond sodium infiltration and constituent redistribution. Thermotransport theory was adapted to model the redistribution phenomenon. As a results, the bond sodium seems to be logged in the outer region of fuel slug. The main driving force for constituent redistribution appears to be the Zr solubility change along to radial position of the fuel. It is evident that the heat of transport also has some contribution to the redistribution.

• Computers and Concrete
• /
• 제16권2호
• /
• pp.191-207
• /
• 2015

It is generally accepted that, in the interest of safety, it is essential to provide a minimum level of flexural ductility, which will allow energy dissipation and moment redistribution as required. If one wishes to be uniformly conservative across all of the design variables, curvature ductility and moment redistribution factor should be calculated using a probabilistic method, as is the case for other design parameters in reinforced concrete mechanics. In this study, simple expressions are derived for the evaluation of curvature ductility and moment redistribution factor, based on the concept of demand and capacity rotation. Probabilistic models are then derived for both the curvature ductility and the moment redistribution factor, by means of central limit theorem and through taking advantage of the specific behaviour of moment redistribution factor as a function of curvature ductility and plastic hinge length. The Monte Carlo Simulation (MCS) method is used to check and verify the results of the proposed method. Although some minor simplifications are made in the proposed method, there is a very good agreement between the MCS and the proposed method. The proposed method could be used in any future probabilistic evaluation of curvature ductility and moment redistribution factors.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.385-388
• /
• 2006

The purpose of this study is to offer an appropriate method of the degree of the flexural moment redistribution for continuous reinforced concrete beams. Twenty-four two-span continuous beams were selected to determine the manner and degree of moment redistribution. The concept of ductility is linked to the moment redistribution capacity and, consequently, the safety of the structure. Knowledge of the plastic rotation capacity of plastic regions of the structure is important for a plastic analysis or a linear analysis with moment redistribution. A nonlinear finite element analysis program named RCAHEST (Reinforced Concrete Analysis in Higher Evaluation System Technology) was used to evaluate the ultimate strength and degree of moment redistribution. The nonlinear material model for the reinforced concrete is composed of models for characterizing the behavior of the concrete, in addition to a model for characterizing the reinforcing bars.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.393-396
• /
• 2006

One of the important aspects of ductility is redistribution. To see the difference of redistribution between reinforced concrete members and prestressed concrete beams, two span continuous concrete beams are tested. From the test results, we can get important information on the redistribution ratio. After occurrence of crack at support section, the redistribution ratio increased and after yielding they fluctated very much. Compare with reinforced concrete, the redistribution ratio of prestressed concrete beam changed more abruptly after yielding. Both of the them show limited redistribution up to 70%.

• Nuclear Engineering and Technology
• /
• 제30권6호
• /
• pp.507-517
• /
• 1998

Unlike conventional fuel types, fuel constituent redistribution and sodium intrusion into the fuel slug are the unique phenomena of the irradiated metallic fuel. A thermal calculation model on metallic U-10 wt.%Zr fuel rod for LMRs is developed with considerations given to these phenomena. The amount of constituent redistribution is estimated based on the thermotransport process. The temperature profile of fuel slug is predicted by taking into account of Zr redistribution, porosity formation and sodium logging effects. A sample calculation is performed and compared to experimental data in literature. As a result, the predicted redistribution and temperature profile are well agreed with experimental data, assuming that 15 times increment of ex-reactor diffusivity, $Q_{r}$ $^{*}$ is -50 kJ/mole and sodium is infiltrated only outside of the fuel slug. Furthermore, the redistribution effects on fuel integrity and fuel temperature profile are discussed.d.

• Structural Engineering and Mechanics
• /
• 제8권2호
• /
• pp.119-136
• /
• 1999

The failure load of a continuous prestressed concrete beam depends partially on the amount of redistribution of moment that occurs prior to failure. Results from a parametric study, carried out using a nonlinear finite element computer program, are presented to demonstrate the influences of various factors on redistribution of moment in two-span, continuous bonded prestressed concrete beams. Trends in the data from the numerical studies are compared with those from a theoretical expression for percentage of redistribution, and it is shown that the redistribution of moment occurring in a continuous prestressed concrete beam is a function of number of parameters.

• Structural Engineering and Mechanics
• /
• 제38권6호
• /
• pp.697-714
• /
• 2011

Assessing the ductility of reinforced concrete sections and members has been a complex and intractable problem for many years. Given the complexity in estimating ductility, members are often designed specifically for strength whilst ductility is provided implicitly through the use of ductile steel reinforcing bars and by ensuring that concrete crushing provides the ultimate limit state. As such, the empirical hinge length and neutral axis depth approaches have been sufficient to estimate ductility and moment redistribution within the bounds of the test regimes from which they were derived. However, being empirical, these methods do not have a sound structural mechanics background and consequently have severe limitations when brittle materials are used and when concrete crushing may not occur. Structural mechanics based approaches to estimating rotational capacities and rotation requirements for given amounts of moment redistribution have shown that FRP plated reinforced concrete (RC) sections can have significant moment redistribution capacities. In this paper, the concept of moment redistribution in beams is explained and it is shown specifically how an existing RC member can be retrofitted with FRP plates for both strength and ductility requirements. Furthermore, it is also shown how ductility through moment redistribution can be used to maximise the increase in strength of a member. The concept of primary and secondary hinges is also introduced and it is shown how the response of the non-hinge region influences the redistribution capacity of the primary hinges, and that for maximum moment redistribution to occur the non-hinge region needs to remain elastic.

• Nuclear Medicine and Molecular Imaging
• /
• 제42권6호
• /
• pp.478-481
• /
• 2008

Reverse redistribution is frequently observed after revascularization in acute myocardial infarction, and usually regarded as a predictor of viable myocardium on stress/rest and 2- to 4-hour redistribution $^{201}Tl$ SPECT. However, there is not enough report of reverse redistribution in case of 24-hour delayed SPECT, which is commonly used for viability assessment. In this report, a case of reverse redistribution on rest and 24-hour delayed $^{201}Tl$ SPECT is reported with use of automatic segmental quantitative analysis. The myocardium of reverse redistribution was dysfunctional on gated SPECT, and diagnosed as non-viable on $^{18}F-FDG$ PET.