• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.6D
• /
• pp.765-769
• /
• 2011

The existing portable reference equipment for ITS systems performance evaluation has several limitations. First, it is difficult to set up and operate the equipment in the road section with the shoulder width equal to or smaller than 1.5m. Secondly, the crash with a car could lead to severe accident since it is big and heavy. Lastly, it cannot collect data from multiple lanes at a time. In this research the characteristics of the USN-based portable reference equipment developed to overcome shortcomings of the existing portable reference equipment were analyzed qualitatively and its performance level was evaluated through the field test. Consequently, the USN-based portable reference equipment turned out to overcome the operational shortcomings and satisfy the performance level required for the portable reference equipment.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.6 no.3
• /
• pp.57-62
• /
• 1992

In this paper, the reasonable design standard of Demand Factor for large office buildings is introduced that was made by the statistical way considering actual conditions, such as investigated electrical equipment capacity, electrical power consumption, etc. The results are as follows. 1) It is shown that th saving of electrical equipment investment, the decrease of power loss, the improvement of facilities utilization and the decrease of electrical power rates can be contributed by the application of the design standard. 2) The effect of reduction is showed to confirm the practical use of the proposed reference Demand Factor, and also, it is believed that this proposed reference Demand Factor will be useful in electrical equipment operation and planning.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.1
• /
• pp.64-75
• /
• 2022

The ITS performance evaluation has been performed in the evaluation of traffic data collection equipment. However, evaluation of the data collection equipment alone cannot guarantee the reliability of the traffic information. So, ITS service evaluation has to be implemented institutionally. In this study, an evaluation method has been prepared to evaluate the accuracy of travel time information in road sections. In addition, a piece of portable reference equipment was developed to collect travel time data on the road. Field tests were performed on two national road sections managed by the Seoul Construction and Management Administration (SCMA) to prepare an evaluation method considering field conditions and evaluate the reference equipment's performance. Based on the test results, the improvement of the reference equipment to collect more samples and the adjustment of collection points were discussed.

• Korean Journal of Computational Design and Engineering
• /
• v.22 no.2
• /
• pp.150-161
• /
• 2017

Effective data exchange among the diverse stakeholders participating in a process plant project is an important issue. ISO 15926 is an international standard to support sharing and integrating of process plant data. iRINGTools is an ISO 15926-based tool used to exchange plant data. To exchange plant data using iRINGTools, the mapping between the data model of a commercial system and ISO 15926 should be preceded. To accomplish this, types and properties of equipment and materials used for plant design should be predefined and these data should be represented as user-defined reference data complying with ISO 15926. Besides, the user-defined reference data should be serviced by a reference data server such that iRINGTools searches reference data from the server and utilizes the data for the model mapping. In this paper, we present a method to construct a reference data server and use it for the model mapping in iRINGTools. The proposed method is verified through experiments of exchanging specifications data of equipment and materials using iRINGTools.

• Journal of Korean Institute of Architectural Sustainable Environment and Building Systems
• /
• v.12 no.6
• /
• pp.543-556
• /
• 2018

Zero energy building was attended for energy consumption minimization by the energy saving technology about building heating and cooling energy consumption and the renewable energy production facility. So the government has supported the zero energy building supply for decreasing green gas emissions. The study about inventory of zero energy building has many proceeding. That inventory need the information of material and equipment. So information of material and equipment about zero energy building must be included for the zero energy building realization. Actually the database of zero energy building inventory construction through the inventory established studies has difficult because the database need many information. In this study, author proposed the test methods and performance reference for upload at inventory. It was constructed to material - module - package. Also the author analyzed the construction of the technical package for zero energy building. The author separated performance category to the energy performance for energy analysis and other performance for confirmed the durability, stability and etc. This performance category proposed the table. The test methods of material and equipment in the passive package and active package proposed to the international standard and korea standard basically korea standard. Also the performance reference was proposed to korea legal standard and various standard by this study results. And the authors proposed the table of performance value, test methods, performance reference. By result of this study, the test methods and performance reference will be used the basic data for inventory of zero energy building.

• Journal of the Semiconductor & Display Technology
• /
• v.18 no.4
• /
• pp.40-45
• /
• 2019

The smart factory has developed with the help of several technologies such as automation, artificial intelligence, big data, smart sensors and communication protocols. The Internet of things(IOT) among communication protocols has become the key factor for the seamless integration of various manufacturing equipment. Therefore, it is important that the IOT cooperate with the standards of communication protocols proposed by the SEMI in the semiconductor industry. In this paper, we suggest a novel reference model of the communication protocols for semiconductor equipment by introducing an IOT service layer. With the IOT service layer, we can use the functions and the additional services provided by the IOT standards that give the inter-operability between factory machines and host computers. We implement the standard of the communication protocols for semiconductor equipment with the IOT service layer by using ns3 simulator. It concludes that it is necessary to provide the platform for the IOT service layer to deploy efficiently the proposed reference model of the communication protocols.

• Proceedings of the KOR-KST Conference
• /
• 1998.09a
• /
• pp.36-42
• /
• 1998

This article analyzes Chinese railways transportation management system, uses the experiences of other countries' railway transportation management system for reference, as well as discusses the necessity of reform of railway transportation management system based on separating train operation with rail equipment management. Moreover, the article also puts forward an imagination on the reform scheme of railway transportation management system based on separating train operation with rail equipment management.

• The Journal of the Korea Contents Association
• /
• v.8 no.1
• /
• pp.195-202
• /
• 2008

Reference linking based on a identification system is being widely used both domestically and overseas. National R&D information contains all information related to the R&D programs such as the output and equipment information resulting from the participant and project information. The reference linking service enables the user to freely look up output of a certain program, participant of a project, equipment information from the project or participant and all other information that originates from a R&D project without having to search for it. The reference linking service in the area of national R&D will enable the linking of heterogeneous information produced at different sources.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.8
• /
• pp.1-7
• /
• 2018

Previous test equipment was bulky, took a long time to check, and was somewhat less economical. Since most of the checks were about analog signals, we preferred to check them using reference equipments. In this paper, a digital circuit design based on AITS is used to implement signals that can not utilize commercial measurement resources, and also designed and manufactured equipment that can inspect SRU. These test equipments were tested and evaluated by development, operation, and field evaluation, and they were installed to the Korean Field Force. This contributed to the improvement of operability by shortening the inspection time from 83.2 minutes to 7.8 minutes on average In addition, it did not utilize the reference equipment, so it could play a big role in lowering the mass production cost.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.60 no.2
• /
• pp.99-104
• /
• 2011

In this paper, the intelligent landscape lighting power control and monitoring system with solar sell generator equipment is proposed. The first, the intelligent landscape lighting power controller is designed using the fuzzy logic control method. And the fuzzy logic controller is used to save power consumption for various reference intensity of the illumination. The second, the GUI monitoring system is presented. It has control and display faculty. And the practical experiment device is used to evaluate the performance criteria of the proposed intelligent landscape lighting power control system with the solar cell power generation equipment. From the experiment results, we present the property of proposed fuzzy controller such as steady state error, the tracking and power consumption characteristic for the reference intensity of illumination. And also we show the superiority of power control as well as the characteristic of GUI monitoring system in the proposed system.