• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.8
• /
• pp.1511-1513
• /
• 2007

A new reference point location method using the cosine component is proposed, where an edge map is defined and used to find the reference point. Because all processes used in the proposed method are performed at the block level, less processing time is required. Experimental results show that the proposed method can effectively detect the reference point with higher speed and accuracy for all types of fingerprints.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.7
• /
• pp.1321-1323
• /
• 2007

A new reference point location method based on an edge map is proposed, where an orientation map is defined and used to find the edge map. Experimental results show that the proposed method can effectively detect the core point in poor quality and arch-type fingerprint images and produces better results in terms of the detection rate and accuracy than the sine map-based method.

• Journal of information and communication convergence engineering
• /
• v.14 no.4
• /
• pp.207-214
• /
• 2016

In this paper, we propose a radial reference map-based location fingerprinting technique with constant spacing from an access point (AP) to all reference points by considering the minimum dynamic range of the received signal strength indicator (RSSI) obtained through an experiment conducted in an indoor environment. Because the minimum dynamic range, 12 dBm, of the RSSI appeared every 20 cm during the training stage, a cell spacing of 80 cm was applied. Furthermore, by considering the minimum dynamic range of an RSSI in the location estimation stage, when an RSSI exceeding the cumulative average by ${\pm}6dBm$ was received, a previously estimated location was provided. We also compared the location estimation accuracy of the proposed method with that of a conventional fingerprinting technique that uses a grid reference map, and found that the average location estimation accuracy of the conventional method was 21.8%, whereas that of the proposed technique was 90.9%.

• Spatial Information Research
• /
• v.15 no.3
• /
• pp.301-310
• /
• 2007

There are 21,000 National Surveying Control Points (NSCP) made of stone for precise surveying nationwide. NSCPs that provide location information are usually buried at the top of a mountain for view points that cannot be used by the public. Recently, according to the growing ubiquitous computing generation, location-based information has become very important and a service that can be easily accessed by the public is needed. In this research, a new type of reference point for a location information service is proposed. It is an Intelligent Reference Point (IRP) equipped with RFID tags and a two-dimensional bar-code system. The IRP system is composed of an electronic tag component, a tag identification component, and an IRP service component. We designed the IRP receiver identifying RFID tag and two-dimensional barcode was designed using a PDA, digital camera, and an RFID receiver. Also designed was IRP input data and input information. Furthermore, the operation software was developed in a PDA for identifying IRP and using IRP the service, and the IRP positioning method was developed using a GIS spatial analysis.

• Journal of Positioning, Navigation, and Timing
• /
• v.11 no.3
• /
• pp.209-215
• /
• 2022

As intelligent autonomous driving vehicle development has become a big topic around the world, accurate reference dynamics estimation has been more important than before. Current systems generally use speed and heading information sensed from a distant point as a vehicle reference dynamic, however, the dynamics between different points are not same especially during rotating motions. In order to estimate properly estimate the reference dynamics from the information such as velocity and heading sensed at a point distant from the reference point such as center of gravity, this study proposes estimating reference dynamics from any location in the vehicle by combining the Bicycle and Ackermann models. A test system was constructed by implementing multiple GNSS/INS equipment on an Robot Operating System (ROS) and an actual car. Angle and speed errors of 10° and 0.2 m/s have been reduced to 0.2° and 0.06 m/s after applying the suggested method.

• Proceedings of the Safety Management and Science Conference
• /
• 2010.11a
• /
• pp.331-335
• /
• 2010

본 논문에서는 위치기반서비스의 핵심기능을 담당하는 측위기술 중 주변의 다양한 잡음환경에서도 다른 측위기술에 비해 비교적 측위오차를 줄일 수 있는 Fingerprint 기법을 적용하여 객체의 위치를 결정하는 방법을 제시하였다. 특히, Fingerprint 기법을 활용함에 있어서 결정적 측위방법이 아닌 확률적 측위방법을 사용하였고, 기존의 연구들에서 제시된 확률적 측위방법에서 인접 RP(Reference Point)들과의 영향성까지 고려한 측위방법을 제시한 것이 본 연구의 특징이다. 비주얼베이직 6.0으로 측위 프로그램을 구현하였고, 실내 외 연속측위의 선행연구로서 실내 측위 테스트를 통해 기존의 결정적 방법, 확률적 방법, 그리고 본 연구에서 제안하는 방법의 측위 정확성을 평가하였다. 테스트 결과, 결정적 측위 방법 및 기존의 확률적 측위방법과 비교하여 각각 평균 15%와 7% 측위 오차가 감소하였다.

• Journal of information and communication convergence engineering
• /
• v.10 no.4
• /
• pp.390-395
• /
• 2012

This paper describes an implementation of automatic mutual localization of swarm robots using a particle filter. Each robot determines the location of the other robots using wireless sensors. The measured data will be used for determination of the movement method of the robot itself. It also affects the other robots' self-arrangement into formations such as circles and lines. We discuss the problem of a circle formation enclosing a target that moves. This method is the solution for enclosing an invader in a circle formation based on mutual localization of the multi-robot without infrastructure. We use trilateration, which does require knowing the value of the coordinates of the reference points. Therefore, specifying the enclosure point based on the number of robots and their relative positions in the coordinate system. A particle filter is used to improve the accuracy of the robot's location. The particle filter is operates better for mutual location of robots than any other estimation algorithms. Through the experiments, we show that the proposed scheme is stable and works well in real environments.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.7
• /
• pp.1524-1532
• /
• 2012

The calibration method using the existing environmental characteristics is to correct taking advantage of the data that is followed Judgement on the environment. If a decision is not made on the environmental judgement, the use of traditional methods may increase rather than errors. In this paper, UWB-based localization system is utilized. We propose Location Correction Algorithm which is available on if you can not make a judgment about any circumstances for location estimation system. Reference Points was selected to observe the characteristics of the localization system. This paper searched the characteristics of the localization system in LOS environment and NLOS environment, and used data correcting the location information of the moving object by combining the two environmental characteristics. The Location Correction Algorithm is applied to the location measured from the location estimation system. This algorithm corrects for the location information of the object. As a result, the location accuracy improvement were observed.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.12
• /
• pp.1683-1689
• /
• 2014

In this paper, we propose an image processing based time-frequency domain reflectometry(TFDR) in order to estimate the fault location of a cable. The Wigner-Ville distribution is used for analysis in both the time domain and the frequency domain when the conventional TFDR estimates the fault location in a cable. However, the Winger-Ville distribution is a bi-linear function, and hence the cross-term is occurred. The conventional TFDR cannot estimate the accurate fault location due to the cross-term in case the fault location is close to the position where the reference signal is applied to the cable. The proposed method can reduce the cross-term effectively using binarization and morphological image processing, and can estimate the fault location more accurately using the template matching based cross correlation compared to the conventional TFDR. To prove the performance of the proposed method, the actual experiments are carried out in some cases.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.4
• /
• pp.530-536
• /
• 2021

Since the LBP algorithm has the characteristic of local texture expression, it is possible to obtain completely different results depending on the extraction location and the size of the reference image and the sample image. In order to solve these shortcomings, in this paper, we first investigate the basic characteristics of LBP, make the size of the reference image (100×100) in order to include most of the characteristics in the image, and select a sample image (40×40) extracted from an arbitrary point. After finding the matching position in the LBP of the reference image by using the correlation test between the LBP of the reference image and the LBP of the sample image, a chi analysis method is used to find the reference image that most closely matches the sample image.