• 대한음성학회지:말소리
• /
• 제59호
• /
• pp.27-51
• /
• 2006

For speech recognition systems, rejection function as well as decoding function is necessary to improve the reliability. There have been many research efforts on out-of-vocabulary word rejection, however, little attention has been paid on non-target sentence rejection. Recently pronunciation approaches using speech recognition increase the need for non-target sentence rejection to provide more accurate and robust results. In this paper, we proposed filler model method and word/phoneme detection ratio method to implement non-target sentence rejection system. We made performance evaluation of filler model along to word-level, phoneme-level, and sentence-level filler models respectively. We also perform the similar experiment using word-level and phoneme-level word/phoneme detection ratio method. For the performance evaluation, the minimized average of FAR and FRR is used for comparing the effectiveness of each method along with the number of words of given sentences. From the experimental results, we got to know that word-level method outperforms the other methods, and word-level filler mode shows slightly better results than that of word detection ratio method.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.369-372
• /
• 2000

ESO(Evolutionary Structural Optimization) method is known that elements involved low stress value are removed from the previous model or that elements are added around elements involved high stress level on it and then the optimized model is obtained with required weight. Rejection ratio/addition ratio and evolutionary ratio are predefined and elements having lower/higher stress than reference stress, which average Mises stress on edge elements times rejection ratio, are deleted/added. In this study, when the plate having a cutout is subjected various in-plane load, a cutout shape is optimized using ESO method. ANSYS is used to analyse a finite element model and optimization procedure is made by APDL (ANSYS Parametric Design Language). ESO method is useful in rather than a complex structure optimization as well as a cutout shape optimization.

• 멤브레인
• /
• 제16권1호
• /
• pp.59-67
• /
• 2006

생분해성 양쪽성 고분자를 이용하여 수용액에 존재하는 소수성 오염물질(페놀, 4-니트로페놀, 벤젠, 톨루엔) 및 중금속($Cs^{+},\;Mg^{2+},\;Cu^{2+},\;Ni^{2+},\;Cr^{3}$)을 제거하였다. 친수성을 띤 단량체로써 분자량이 서로 다른(1,100 그리고 5,000) methoxy poly(ethylene glycol) (MPEG)를 이용해 합성하였다. 투과실험 결과 상대적으로 분자량이 작은 MPEG를 이용해 합성한 경우보다 분자량이 큰 MPEG를 사용하였을 때 더 높은 제거율을 나타내었다. 한외여과공정을 이용해 오염물 없이 생분해성 나노파티클을 투과한 결과 나노파티클 용액의 농도가 100 mg/L 이상인 경우 나노 파티클 제거율은 98% 이상이었다. 소수성을 나타내는 오염원 제거시 소수성이 큰 오염원일수록 더 높은 제거율을 보였다. 또한 금속이온의 경우는 3가, 2가, 1가 이온의 순서로 제거율이 높았다.

• The Journal of the Acoustical Society of Korea
• /
• 제17권1E호
• /
• pp.10-13
• /
• 1998

We propose a robust non-speech rejection algorithm using the three types of pitch-related parameters. The robust non-speech rejection algorithm utilizes three kinds of pitch parameters : (1) pitch range, (2) difference of the successive pitch range, and (3) the number of successive pitches satisfying constraints related with the previous two parameters. The acceptance rate of the speech commands was 95% for -2.8dB signal-to-noise ratio (SNR) speech database that consisted of 2440 utterances. The rejection rate of the non-speech sounds was 100% while the acceptance rate of the speech commands was 97% in an office environment.

• 대한음성학회:학술대회논문집
• /
• 대한음성학회 2005년도 춘계 학술대회 발표논문집
• /
• pp.99-102
• /
• 2005

Research efforts have been made for out-of-vocabulary word rejection to improve the confidence of speech recognition systems. However, little attention has been paid to non-recognition sentence rejection. According to the appearance of pronunciation correction systems using speech recognition technology, it is needed to reject non-recognition sentences to provide users with more accurate and robust results. In this paper, we introduce standard phoneme based sentence rejection system with no need of special filler models. Instead we used word spotting ratio to determine whether input sentences would be accepted or rejected. Experimental results show that we can achieve comparable performance using only standard phoneme based recognition network in terms of the average of FRR and FAR.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제4C권6호
• /
• pp.272-275
• /
• 2004

A balanced single side-band (SSB) mixer employing a sub-harmonic configuration is designed for up and down conversions in K-band. The designed mixer uses anti-parallel diode (APD) pairs to effectively eliminate even harmonics of the local oscillator (LO) spurious signal. To reduce the odd harmonics of LO at the RF port, we employ a balanced configuration for LO. The fabricated chip shows 12$\pm$2dB of conversion loss and image-rejection ratio of about 20dB for down conversion at RF frequencies of 24-27.5GHz. As an up-conversion mode, the designed chip shows 12dB of conversion loss and image-rejection ratio of 20 ～ 25 dB at RF frequencies of 25 to 27GHz. The odd harmonics of the LO are measured below -37dBc.

• 전기전자학회논문지
• /
• 제22권2호
• /
• pp.413-419
• /
• 2018

이중 대역저지 특성을 가지는 UWB(Ultra Wide Band) 안테나를 설계 및 구현하였다. 슬롯을 포함한 평면 방사패치, 스트립선로 양쪽의 기생소자와 아랫면의 접지면으로 제안된 안테나가 구성되어있다. 평면 방사 패치 내에 있는 슬롯과 기생소자가 각각 해당 대역을 저지한다. 슬롯은 WiMAX(World interoperability for Microwave Access, 3.30~3.70 GHz) 대역을, 기생소자는 X-Band(7.25~8.395 GHz) 대역을 저지하는데 각각 기여한다. 제안된 안테나의 설계하고 성능을 평가하는데 Ansoft의 HFSS(High Frequency Structure Simulator)가 사용되었다. 전산모의실험결과는 저지 대역인 3.30~3.86 GHz, 7.21~8.39 GHz를 제외한 구간에서 VSWR(Voltage Standing Wave Ratio)는 2.0 이하를 보였다. 구현된 안테나의 VSWR 측정 결과는 저지 대역인 3.25~3.71 GHz, 7.25~8.46 GHz를 제외한 3.10~10.60 GHz 구간에서 VSWR 값이 2.0 이하로 나타났다.

• 한국자동차공학회논문집
• /
• 제5권6호
• /
• pp.77-88
• /
• 1997

The heat rejection to coolant is a dominant factor for building vehicle cooling system such as radiator and cooling fan. Since the vehicle cooling system also has effects on fuel consumption and noise, the study of heat rejection to coolant has been emphasized. However, the study on heat rejection to coolant has been mainly focused on the field that related to the characteristics of combustion and localized heat loss. It is no much of use in design for the entire cooling system because it is focused on such a specific point. In this work, the heat rejection rate to coolant for four different engines are obtained to derive a simple heat transfer empirical formula that can be applied to the engine cooling system design, and it is compared with the other studies. Also, to observe effects of engine operation factors and heat transfer factors on coolant, we measured the metal temperature and the heat rejection rate. The heat rejection to coolant does not depend significantly upon the coolant flowrate, but mainly upon the amount of air fuel mixture and the air fuel ratio as long as the composition of coolant does not change. The reduction of heat rejection to coolant did not effectively improve the fuel consumption, but was mostly converted to raise the exhaust gas temperature and the oil temperature.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2004년도 Proceedings of the second conference of aseanian membrane society
• /
• pp.15-18
• /
• 2004

Computational fluid dynamics (CFD) was applied to modeling particle dynamics in microfiltration (MF). The rejection properties of poly methylmethacrylate (PMMA) and polystyrene (PS) were calculated. Calculated rejection (R) of PMMA was independent with the porosity of the membrane, and the R was constant in the range of volume flux between $1\times 1-^{-4}-1\times 10^{-2}$ m/s. These observations were in quantity agreement with our experimental observations. The dependence of PMMA and PS rejection on the ratio of particle diameter and pore diameter were good agreement with the experimental values, which suggesting that the validity of CFD simulation to evaluate rejection of particle in MF membranes. Change of rejection of PMMA as a function of time was molded based on the CFD result which explained well the experimental observation.

• Journal of electromagnetic engineering and science
• /
• 제6권1호
• /
• pp.18-23
• /
• 2006

In this paper, we demonstrate a fully integrated X-band image rejection down converter, which was developed using InGaP/GaAs HBT MMIC technology, consists of two single-balanced mixers, a differential buffer amplifier, a differential YCO, an LO quadratue generator, a three-stage polyphase filter, and a differential intermediate frequency(IF) amplifier. The X-band image rejection downconverter yields an image rejection ratio of over 25 dB, a conversion gain of over 2.5 dB, and an output-referred 1-dB compression power$(P_{1dB,OUT})$ of - 10 dBm. This downconverter achieves broadband image rejection characteristics over a frequency range of 1.1 GHz with a current consumption of 60 mA from a 3-V supply.