• Journal of Pharmaceutical Investigation
• /
• 제22권2호
• /
• pp.133-137
• /
• 1992

A novel oral controlled release tablet which may offer more uniform drug level in the body than simple zero-order was developed. The tablet is composed of three layers; outer film layer, middle part compression-coated hydroxypropylmethylcellulose (HPMC) matrix layer, and inner core layer. Each layer contains nicardipine HCl as a model drug. In vitro dissolution test showed that the tablet released the drug in clear three steps; a rapid initial release, followed by a constant rate of release, and then a second phase of fast release of drug. The dissolution characteristics could be modified easily by changing the grade of HPMC, thickness of matrix layer, content of methylcellulose in matrix layer, content of active ingredient in each layer. The pH of dissolution medium did not affect the release profile. This three-step release system is expected to raise the blood concentration rapidly to effective level and to maintain effective blood level longer than simple slow-release systems.

• Journal of Pharmaceutical Investigation
• /
• 제27권3호
• /
• pp.213-217
• /
• 1997

The present sustained-release terfenadine-pseudoephedrine HCl dosage form was the core tablet composed of outer (fast-release) layer containing 60 mg of terfenadine and l0mg of pseudoephedrine HCl, and inner (sustained-release) layer containing 110 mg of pseudoephedrine HCl. The purpose of this study was to investigate the possibility of formulating the terfenadine-pseudoephedrine HCl double-layered tablet which was bioequivalent to the core tablet. Its sustained-release and fast-release layer were formulated with disintegrating agents and polymers, respectively, varying with their kinds and amounts. The comparative dissolution test of double-layered and core tablet was carried out at pH 1.2, 4.0 and 6.8, leading to select composite of double-layered tablet whose dissolution pattern was similar to that of core tablet. It was composed of fast-release layer containing 60mg of terfenadine. 10 mg of pseudoephedrine HCl, sodium bicarbonate, microcrystalline cellulose and sodium starch glycolate, and sustained-release layer containing 110 mg of pseudoephedrine HCl and ethylcellulose/hydroxypropyl methylcellulose) (110/30 mg/tablet).

• 공업화학
• /
• 제34권2호
• /
• pp.161-169
• /
• 2023

본 연구는 allbanggae starch (ABS), polyvinyl alcohol (PVA), alginic acid (SA)를 이용하여 naproxen (NP) 각인 starch 기반 다층 바이오소재를 제조하고, 물리화학적 특성과 약물 방출 제어 효과를 조사하였다. 또한, FE-SEM과 FT-IR 분석에 의해 제조한 다층 바이오소재의 특성을 조사하였다. 약물 방출 제어 효과와 경피 약물 전달 시스템의 적용 가능성을 확인하기 위해 NP 각인 다층 바이오소재로부터 NP 방출 특성을 사람의 체온인 36.5 ℃에서 다양한 pH buffer solution과 인공 피부를 이용하여 확인하였다. NP는 낮은 pH보다 높은 pH에서 1.3배 더 빠른 방출을 나타냈고, single-layer 바이오소재에서보다 multi-layer 바이오소재에서 약 4.0배 느린 방출이 일어남을 확인하였다. 인공 피부 방출에서도 동일하게 single-layer 바이오소재보다 multi-layer 바이오소재에서 약 4.0배 더 느린 약물 방출 결과를 나타내었다. 또한, double-layer와 triple-layer 바이오소재 모두 12시간 동안 지속적으로 NP가 방출되었음을 확인 하였다. NP 방출 mechanism을 규명하기 위해 수학적 모델링에 적용하여 비교했을 때, pH buffer solution에서의 방출은 Fickian diffusion mechanism, 인공 피부 방출은 empirical mechanism에 적합한 것을 확인하였다.

• Journal of Pharmaceutical Investigation
• /
• 제37권2호
• /
• pp.101-106
• /
• 2007

Venlafaxine, 1-[2-(dimethylamino)-1-(4-methoxyphenyl)ethyl] cyclohexanol hydrochloride is a novel, nontricyclic antidepressant. venlafaxine is a unique antidepressant that differs structurally from other currently available. The aim ot the study was to formulate sustained-release venlafaxine granules and assess their formulation variables. It consists of two layers, venlafaxine drug layer and sustained release coating layer and manufactured by fluidized bed process. The sustained release of drug could be increased by double-control rising various components in venlafaxine drug layer and sustained-release layer. The drug-containing granules were coated with cellulose acetate, cetyl alcohol and Eudragit RS along with plastisizer such as dibuthyl sebacate as an nano-pore former The release oi venlafaxine depended on the type of Eudragit such as RS, and RL used in the formulation of controlled release layer. These results obtained clearly suggest that the sustained release oral delivery system for venlafaxine could be designed with satisfying drug release profile approved.

• 폴리머
• /
• 제29권6호
• /
• pp.593-598
• /
• 2005

Layer-by-layer(LbL) 자기 조립법에 의한 poly(ethylene-alt-maleic anhydride)(PEMAh)/poly(4-vinyl pyridine)(P4VP) 다층막의 염료 흡착 거동 및 pH 변화에 의한 염료 방출 거동을 Rodamine 6G(R6G)를 지시제로 사용하여 조사하였다. UV-vis 분광 분석을 이용하여 (PEMAh/P4VP)n 다층막의 두께 및 R6G의 흡착 및 방출 거동을 조사하였다. 다층막에 흡착되는 R6G의 흡착량은 필름의 두께 증가에 따라 선형적으로 증가하였다. (PEMAhAh/P4VP)n 다층막의 투과성은 pH 조건에 민감한 거동을 보였으며, 방출액의 pH가 감소할수록 R6G 방출 속도와 방출량은 증가하였다. PEMAh/poly(ethyleneimine)(PEI) capping layer를 (PEMAh/P4VP)n 다층막에 추가로 적층함으로써 흡착된 R6G의 방출 속도를 조절할 수 있었다.

• 환경영향평가
• /
• 제21권5호
• /
• pp.665-681
• /
• 2012

This study investigates the influence of anthropogenic heat (AH) release on urban boundary layer in the Gyeong-In region using the Weather Research and Forecasting model that includes the Seoul National University Urban Canopy Model (SNUUCM). The gridded AH emission data, which is estimated in the Gyeong-In region in 2002 based on the energy consumption statistics data, are implemented into the SNUUCM. The simulated air temperature and wind speed show good agreement with the observed ones particularly in terms of phase for 11 urban sites, but they are overestimated in the nighttime. It is found that the influence of AH release on air temperature is larger in the nighttime than in the daytime even though the AH intensity is larger in the daytime. As compared with the results with AH release and without AH release, the contribution of AH release on urban heat island intensity is large in the nighttime and in the morning. As the AH intensity increases, the water vapor mixing ratio decreases in the daytime but increases in the nighttime. The atmospheric boundary layer height increases greatly in the morning (0800 - 1100 LST) and midnight (0000 LST). These results indicate that AH release can have an impact on weather and air quality in urban areas.

• Archives of Pharmacal Research
• /
• 제21권6호
• /
• pp.645-650
• /
• 1998

The dual drug-loaded alginate beads simultaneously containing drug in inner and outer layers were prepared by dropping plain (single-layered) alginate beads into $CaCl_2$ solution. The release characteristics were evaluated in simulated gastric fluid for 2 h followed by intestinal fluids thereafter for 12 h. The surface morphology and cross section of dual drug-loaded alginate beads was also investigated using scanning electron microscope (SEM). The poorlv water-soluble ibuprofen was chosen as a model drug. The surface of single-layered and dual drug-loaded alginate beads showed very crude and roughness, showing aggregated particles, surface cracks and rough crystals. The thickness of dual drug-loaded alginate beads surrounded by outer layer was ranged from about 57 to 329mcm. The distinct chasm between inner and outer layers was also observed. In case of single-layered alginate bead, the drug was not released in gastric fluid but was largely released in intestinal fluid. However, the release rate decreased as the reinforcing $Eudragit^{\circledR}$ polymer contents increased. When the plasticizers were added into polymer, the release rate largely decreased. The release rate of dual drug-loaded alginate beads was stable in gastric fluid for 2 h but largely increased when switched in intestinal fluid. The drug linearly released for 4 h followed by another linear release thereafter, showing a distinct biphasic release characteristics. There was a difference in the release profiles between single-layered and dual drug-loaded alginate beads due to their structural shape. However, this biphasic release profiles were modified by varying formulation compositions of inner and outer layer of alginate beads. The release rate of dual drug-loaded alginate beads slightly decreased when the outer layer was reinforced with $Eudragit^{\circledR}$ RS1OO polymers. In case of dual drug-loaded alginate beads with polymer-reinforced outer layer only, the initial amount of druc released was low but the initial release rate (slope) was higher due to more swellable inner cores when compared to polymer-reinforced inner cores. The current dual drug-loaded alginate beads may be used to deliver the drugs in a time dependent manner.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.187-188
• /
• 2005

In this paper, big free standing metal structures for electrostatic MEMS switches are easily fabricated using photoresist sacrificial layer. The entire process sequence, through the removal of the sacrificial layer, is kept below 150 $^{\circ}C$ to avoid curing problem of photoresist sacrificial layer. Metal structure is fabricated by thermal evaporator and a self test electrode is fabricated underlying metal suspended structure for testing by electrostatic force. The new wet release process is considered using methanol rinse, general wet release process cause stiction problem by capillary force during drying, and the yield is dramatically improved than previous wet release process using DI water rinse. The fabrication becomes much simpler and cheaper with use of a photoresist sacrificial layer.

• 폴리머
• /
• 제32권2호
• /
• pp.103-108
• /
• 2008

삼투정 펠렛은 경구를 통한 약물전달 시스템에 폭넓게 사용되고 있으며, 이러한 삼투정 펠렛은 수팽윤성 시드층과 모델약물인 니페디핀을 포함하는 약물층 그리고 약물의 방출을 조절하는 반투막 층으로 구성되어 있다. 이번 연구에서는 모델약물인 니페디핀을 포함한 삼투정 펠렛을 제조하고, 반투막층으로 사용되는 초산셀룰로오스(CA)와 Eudragit RS의 코팅두께에 따른 약물방출 거동과 알긴산 나트륨과 알긴산 나트륨의 가교가 삼투정 펠렛의 약물방출에 미치는 영향에 대하여 확인하고자 하였다. 모델약물인 니페디핀을 포함한 삼투정 펠렛의 제조는 유동층코팅기를 이용하여 제조하였으며, 비교적 높은 코팅 수율로 $1500{\sim}1700{\mu}m$ 내외의 펠렛이 제조됨을 SEM을 통하여 확인하였다. 이렇게 얻어진 펠렛의 반투막 층의 코팅두께에 따른 약물방출 거동을 보면 반투막의 코팅 두께가 증가할수록 약물의 방출이 지연됨을 확인하였다. 알긴산 나트륨을 반투막층 위에 코팅하였을 경우 인공위액(pH 1.2)에서는 약물방출이 거의 일어나지 않았으며, 인공장액(pH 6.8)으로 교체한 후 약물방출이 서서히 증가함을 알 수 있었다. 또한 알긴산 나트륨을 염화칼슘을 이용하여 가교시켰을 경우 약물의 방출이 급격히 감소함을 알 수 있었다. 이번 실험을 통하여 삼투정 펠렛의 약물방출은 반투막충의 코팅두께에 영향을 받으며, 알긴산 나트륨이 삼투정 펠렛의 약물방출에 영향을 끼침을 확인하였다.

• Journal of Pharmaceutical Investigation
• /
• 제20권2호
• /
• pp.89-95
• /
• 1990

Ethylcellulose-PEG 4000 film coated on core tablets was investigated as a potential drug delivery system for the controlled release of chlorpheniramine maleate (CPM). The kinetic analysis of the release data indicated that CPM release followed a diffusion-controlled model, where the quantity released per unit area is proportional to the square root of time. The effect of the film composition, CPM concentration, plasticizer concentration and CPM solubility on the release characteristics were examined. The release rate constant increased as CPM concentration increased. It also increased as the PEG 4000 content in the film increased above 10%(w/w), however, it decreased as the PEG 4000 content increased in the concentration range below 10%(w/w). The release rate constant was not affected by the coated weight on the core tablet. The film-coated tablets which contain CPM only in the coated film layer seemed to be a potential oral drug delivery system for the controlled release of CPM.