• Transactions of the KSME C: Technology and Education
• /
• v.4 no.2
• /
• pp.117-122
• /
• 2016

Ecumenically, RPAS(Remotely Piloted Aircraft System) operation has been increased and the related accidents also have occurred. Accordingly, national authorities, organizations and industry have been striving for amendment and enactment of policy and regulation related to the RPAS(Remotely Piloted Aircraft System) operation. And ICAO had performed the joint study to make international standards through UASSG(Unmanned Aerial System Study Group). Recently this group has been switched to the panel meeting, RPASP(Remotely Piloted Aircraft System Panel). It has been discussed to make the related annex, SARPs(Standards and Recommended Practices) and etc. in RPASP. In this paper, we investigated the trend of study and development for ICAO RPAS policy and regulation. Based on these results, we suggested considerations to prepare domestic policy and regulations.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.361-366
• /
• 1991

A ground and airborne control system for remotely piloted vehicle (RPV) is described. 1) Ground control system 2) airborne control system 3) the method of measuring aircraft attitude and heading 4) autopilot 5) the method of treating emergency status 6) the method of transmitting and receiving communication data 7) the method of displaying aircraft status 8) the characteristics of the aircraft control system are discussed in some detail.

• Journal of Advanced Navigation Technology
• /
• v.19 no.6
• /
• pp.492-498
• /
• 2015

With the rapid growth of technologies and demand of remotely piloted aircraft systems (RPASs), integration of such systems into the existing airspace is becoming an issue in many countries. To assess the impact of integrated operations of manned and remotely piloted aircraft (RPA), it is necessary to perform Human-in-The-Loop (HiTL) simulations of likely situations with an integrated simulation system. This paper defines several operational concepts for the integrated simulation. Several probable scenarios were developed including a traffic pattern at a small airport and an altitude maneuver at a route crossing. HiTL simulations were performed according to the developed scenarios. The simulation results are analyzed focusing on the impacts of different communication, safety, performance, and human machine interface (HMI) characteristics of RPA.

• The Korean Journal of Air & Space Law and Policy
• /
• v.35 no.3
• /
• pp.65-93
• /
• 2020

With the development of information and communication technology, the unmanned aerial vehicle industry began to attract attention as a new growth industry as it entered the fourth industrial revolution. As the size of the unmanned aerial vehicles and the scope of airspace vary from small drones to large unmanned aerial vehicles, the developed countries such as USA and Europe are developing plans for the integrated operation of manned and unmanned aerial vehicles. ICAO is also working on amendments to the relevant ICAO annexes to establish international standards and recommendations for unmanned aerial vehicles. Korea also needs to prepare for the integrated operation of manned and unmanned aerial vehicles that will come in the future, and for this purpose, it is necessary to review and revise the national regulation systems for the safe operation of unmanned aerial vehicles. This study analyzes the amendments of related annexes discussed on the Remotely Piloted Aircraft System (RPAS) pannel, and suggests the direction of revision of the Aviation Safety Act for the safe operation of unmanned aerial vehicles in comparison with the existing Aviation Safety Act.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.21 no.1
• /
• pp.74-79
• /
• 2013

Early remotely-piloted aircraft system (RPAS) development focused on simple reconnaissance to obtain information by visual observation for military demands. Currently, various types of remotely-piloted aircraft (RPA) is being developed worldwide for applications in many different areas. As RPA avionics are combined with CNS/ATM technologies, RPA capabilities will be enhanced and the market is expected to grow rapidly. ICAO has been held the Air Navigation Commission on 14 October 2011 to discuss revising Procedures for air navigation services (PANS) and guidance material related to RPA and their associated systems. It progressed that Annex 2 and 7 will be revised and came into effect from 2012. However most of incorporate revisions are not clear yet. Because the revision articles recommend follow requirements of the state(s). Considering operations of RPA in controlled airspace and between adjacent states, the qualification and training of RPA pilot will be one of the main issues for RPA operation. In this paper, we will take a look at international and domestic trends of regulation framework in ICAO and RPA advanced country in chapter 2.1 and suggest about consideration of remote pilot qualification and training for establishing regulations of remote pilot license.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.8
• /
• pp.739-747
• /
• 2015

With rapid growth in the technologies and demand of Remotely Piloted Aircraft Systems (RPASs), integration of such systems into the existing airspace system is becoming an issue in many countries. RPAS have different flight performances, communication characteristics, separation assurance mechanisms, and human machine interfaces from manned aircraft. To establish rules and regulations for RPAS integration, it is important to understand the impacts of RPASs on the airspace system. A simulation system that integrates manned aircraft, air traffic control, and RPASs is developed in Inha University to investigate these impacts through Human-in-The-Loop (HiTL) simulations. Three conflict resolution scenarios between a manned aircraft and a Remotely Piloted Aircraft (RPA) were constructed and tested. Human factors such as the response times of pilots and controllers were measured and analyzed as well as the risk of each maneuver.

• Journal of Positioning, Navigation, and Timing
• /
• v.9 no.2
• /
• pp.125-129
• /
• 2020

In this paper, Zero velocity UPdaTe (ZUPT) is implemented on the navigation system of Remotely Piloted Aircraft for GNSS denied environment. RPA's navigation system suffers from lack or loss of satellite signal while maintenance or ground test inside a hangar. Although some of the hangars install GPS repeaters for indoor tests, the anti-jamming equipment with array antenna blocks the repeater signal regarding them as hostile jamming signal. With ZUPT, an aircraft navigation system can be tested free from the divergence of navigation solution without line-of-sight satellites. The designed ZUPT aided centralized Kalman Filter is implemented on the Embedded GPS&INS and simulated with Captive Flight Test data. The simulation result shows stable navigation solution without GNSS updates.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.42 no.4
• /
• pp.69-75
• /
• 2019

Remotely Piloted Aircraft (RPA) controls as a type of unmanned aerial vehicle (drone) is growing rapidly and its flight controller stick disposition is required standardization. We should standardize RPA drone flight control disposition because the flight pilot of RPA is hard to be trained so the flight controller stick differences impairs safety and wastes time and effort of flight controller industry. So this study researches the on-going standardization of RPA drone flight control disposition in Korea and foreign countries. Also this paper analyzes and researches of expert about RPA drone flight controller function and application of flight control mode. I accomplished expert research about standardization plan of unmanned flight control mode and confirm the necessity. Nowadays mode1 and 2 are mostly used in Korea so I carried out preference investigation for two modes. There were 4 preferences choices of RPA drone control mode necessity (importance) and recommendation of standardization modes. They answered that necessity of standardization is important considering pilot training, flight safety and positive development of drone industry. The result of standardization mode preference is that they prefer mode 2 (drone maker 86%, training facilities and research facilities 58%, government bureau 60%). Overall preference result shows that mode 1 24%, mode 1&2 16%, mode 2 60%. So they preferred mode 2 by 60%. The differences between two modes are the direction of throttle and pitch. Direction of throttle and pitch operate opposite way. They prefer mode 2 because mode 2 has similarities of manned flight control mode. Significance of this study is that it showed the necessity of standardization and flight control preference in a quantitative way. It will help drone standardization in related industries and development direction near future.

• International Journal of Aeronautical and Space Sciences
• /
• v.17 no.4
• /
• pp.604-613
• /
• 2016

In this paper, Human-in-the-Loop (HiTL) simulations of Remotely Piloted Aircraft System (RPAS) operations in two different Air Traffic Management (ATM) concepts, conventional radar vectoring and Trajectory Based Operations (TBO), were performed to assess the impacts of RPAS integration in the future ATM environment. TBO concept maximizes the throughput by planning and sharing 4-D trajectories between pilots and controllers, and it is considered one of the key concepts to enable RPASs to operate with manned aircraft in congested airspaces. RPASs are characterized by having communication delay or temporary loss of communication. TBO capability was added to the integrated air traffic simulation system for this study, which was developed in the Inha University. HiTL simulations were performed by a trainee air traffic controller with three scenarios, and the data were analyzed using safety, efficiency, and controller workload metrics. The results suggest that TBO were effective in reducing delays and controller workload while maintaining the level of safety.

• Journal of Advanced Navigation Technology
• /
• v.22 no.1
• /
• pp.1-12
• /
• 2018

Currently, the domestic UAS technology is lagging behind the leading countries in terms of both advanced technology and industrial competitiveness, but it cannot avoid the global efforts of integrating UAS into existing manned aviation system and applying them to industries. UAS is a relatively new system to existing aviation world, but ICAO is making a great effort to help Contracting States and the aviation industries to better understand and promote UAV systems. In particular, the UAS is classified as RPAS and other UAS, leading to the standardization work for integrating the RPAS into the manned aviation in the near future. For this purpose, ICAO has been promoting the standardization for the global operation of the RPAS, and in this study, it has been carrying out the study on the strategy to establish the domestic RPAS certification system including the ICAO standardization activities. This paper analyzes the domestic and international regulatory frameworks for RPAS and presents a strategy for building the domestic RPAS certification system.