• Current Optics and Photonics
• /
• v.7 no.6
• /
• pp.761-765
• /
• 2023

We analyzed the absorption spectra of acetone in the 3.37 ㎛ mid-infrared range using the off-axis integrated cavity output spectroscopy technique to develop a real-time, in-line breath analysis device. The linear relationship between acetone concentration and absorption increase was confirmed as 0.32%/ppm, indicating that the developed device allows for a quantitative analysis of acetone concentration in exhaled breath. To further confirm the feasibility of using our device for breath analysis, we measured the acetone concentration of human breath samples at the sub-ppm level.

• Journal of Navigation and Port Research
• /
• v.37 no.2
• /
• pp.195-201
• /
• 2013

Recently according to increase of enlarged scale ports in conformity with increase in over size vessels and container handling service, pollutants generated from ports are increasing. In advanced countries, reduction in carbon dioxide emission assigned to them has been implemented according to the Climate Change Convention and Kyoto Protocol from 2008 to 2012 in order to lessen carbon dioxide emission. Henceforth increase in discussion on the measure of constructing Green Port and low-carbon port is expected in our nation's field of port as well, it is considered that the effort in reduction with regard to undesirable output which causes environmental problem of analysis target during measuring effectiveness. Therefore, in this study, effectiveness was estimated through directional technology distance function considering undesirable output differently from effectiveness analysis of existing container terminal, and then performed comparative analysis with the result analyzed with BCC output-oriented model. As the result of analysis, in 2007 DMU3 and DMU5, and in 2010 DMU2 and DMU4 appeared to be efficient terminals in BCC output oriented model, and in directional technology distance function model, DMU1, DMU3 in 2007, DMU3, DMU5 in 2008, DMU7 in 2009, and DMU2, DMU5 in 2010 appeared to be efficient terminals.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.12-13
• /
• 2007

In this paper, we studied the analysis of environmental effects on maximum output power change of crystalline silicon photovoltaic module. During the test period, there was a 5% reduction of maximum output power on an average. And the degree of output power uniformity became better compared to initial value. Using climate data like rain, snow and dust, we tried to find the reasons for maximum power fluctuation. The surface of PV module was monitored using microscope and infrared camera to study temperature distribution. The further analysis is described in the following paper.

• Journal of Environmental Science International
• /
• v.21 no.4
• /
• pp.461-470
• /
• 2012

Agriculture is more influenced by environmental factors rather than other industries. Among the environmental factors, the meteorological conditions mainly impact the output of agricultural products. Hence, the purpose of this study is to analyze the impact of meteorological factors on the output of elemental agricultural products. As a first step, we obtained the data of the meteorological factors (i.e., precipitation, humidity, temperature, insolation, snowdrifts, wind velocity) and the output of the various agricultural products (i.e., grain, fruits and vegetables, root crops, green vegetables, seasoned vegetables, fruits, special crops) from the year 1990 to 2009 (20 years) of Seoul and the six metropolitan cities in Korea. Then, the analysis of the correlation between the agricultural product with the largest output and the meteorological factors of the place where the corresponding agricultural product is most produced, was carried out in order to determine the core meteorological factor that most impacts the output of agricultural product. The correlation analysis revealed that humidity, insolation and wind velocity have been the crucial meteorological factors to influence the output of the agricultural products. From the result, we can induce that the meteorological forecast information about the vital meteorological factors, i.e., humidity, insolation and wind velocity, facilitates the optimized cultivation plan to maximize the output of agricultural products.

• STI Policy Review
• /
• v.7 no.2
• /
• pp.85-105
• /
• 2016

This study compares the economic impacts among ICT sectors and derives strategic considerations for development of the ICT industry in Korea. Prior to analysis, this study classified ICT industry into four sectors: ICT equipment, components, service, and SW/system. This study conducted Input-Output Analysis on the four ICT sectors. An Input-Output Analysis is a quantitative economic technique that represents the direct and indirect interdependencies between different industries of a national economy. Features of each ICT sector were observed in the results. Within the ICT equipment sector, production is decreasing, import dependence is increasing, and employment size is very low, relative to the overall ICT industry. The component sector accounts for the over half of the output and value added of the ICT industry, but domestic production has recently declined. The subsector experienced decreasing production and increasing imports relative to the other ICT subsectors. In the service sector, output is small but its production and employment impact is very high. The fourth sector, ICT SW/system, has very low impact on production but high impact on employment. These features suggest two strategies to develop the ICT industry in Korea. First, the ICT component and service sectors should be promoted to stimulate growth of the national economy. Second, to encourage employment growth, policies should promote the ICT SW/system and service sectors.

• Proceedings of the Technology Innovation Conference
• /
• 1997.07a
• /
• pp.160-171
• /
• 1997

This paper starts out by reviewing the literature that in different ways utilizes patent data as a output of R&D investment. The main focus, however, is an analysis of time-lag between R&D input and output. To achieve this research objective, the basic data associated with the R&D input(expenditure, researchers) and output(patent, utilities) for the past 15 years, from 1980 to 1994, in the areas of electrical-electronic, mechanical and chemical industries have been collected. And the raw output data were altered it to objective data using Laspeyres approach and analyzed using multiple regression analysis, especially stepwise regression analysis. The result of this study can be summarized as follows: a) The time-lag between R&D input and output is from 1 to 4 years. This result is equal to the research conclusion of the existing foreign studies. b) It was found that the time-lag of patents was longer than of utility models. c) It was showed that the time-lag of electrical-electronic, mechanical industry was longer than the chemical one.

• Journal of Technology Innovation
• /
• v.7 no.1
• /
• pp.176-186
• /
• 1999

This paper starts out by reviewing the literature that in different ways utilizes patent data as an output of Research ＆ Development (R&D) investment. The main focus, however, is an analysis of time-lag between industrial R&D input and its output. To achieve this research's purpose, the basic data associated with the industrial R&D input (expenditure, researchers) and output (applied patent and utilities) for the past 15 years, from 1980 to 1994, in the areas of electrical-electronic, mechanical and chemical industries have been collected. And the raw input data were altered into real flow data (but stock data) using Laspeyres approach and analyzed using multiple regression analysis, especially stepwise regression analysis. The result of this study can be summarized as follows: a) The time-lag; between industrial R&D input and its output is within 1 to 3 years. b) The time-lag: of patents was longer than that of utility models. c) The time-lag: in electrical-electronic, chemical industry was longer than that of the mechanical industry.

• KEPCO Journal on Electric Power and Energy
• /
• v.7 no.2
• /
• pp.255-261
• /
• 2021

This paper proposes impedance-based stability analysis of DC-DC boost converters, where a harmonic state space (HSS) modeling technique is used. At first, the HSS model of the boost converter is developed. Then, the closed-loop output impedance of the converter is derived in frequency domain using small signal modeling including frequency couplings, where harmonic transfer function (HTF) matrices of the open-loop output impedance, the duty-to-output, and the voltage controller are involved. The frequency response of the output impedance reveals a resonance frequency at low frequency region and frequency couplings at sidebands of switching frequency which agree with the simulation and experimental result.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.32 no.3
• /
• pp.81-96
• /
• 2007

This paper analyses the Korean information and communication technology supply side across the economy using 1995, 2000 and 2003 input-output tables. Input-output analysis considers inter-industry relations in an economy, depicting how the output of one industry goes to another industry where it serves as an input, and thereby makes one industry dependent on another both as customer of output and as supplier of Inputs. It can be evaluated that the recent growth of Korean ICT sector has come from the development of communication service and equipment industry and software industry. Although the high performance and positive revealed comparative advantages in ICT manufacturing sector, the value added and employment in that sector are not satisfactory. It may reflect in part high portion of imported intermediate goods in ICT manufacturing. However, it is fortunate that ICT services, which accounted for relatively high value added, induce the development of ICT manufacturing and follow strong export performance. Moreover, it is expected that the software sector with high value added and employment will be a major driver of ICT growth.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.40
• /
• pp.33-63
• /
• 2008

This study introduces the adoption of the logistics industry by the Korean government as a threshold of overcoming economic difficulties. The core contents of the National Logistics Plans (2001-2020) which contain the basic principles of the logistics policies of the Korean government and its aim to be an 'Excellent Nation of Logistics' is introduced. The economic effect of the logistics policies implemented between 2001 and 2005, (the period of the first Medium-term Logistics Plan according to the National Logistics Plans (2001-2020) set up by the Korean government at the end of 2000) is estimated through input-output analysis. The input-output analysis result is as follows: the total output effect is 8,856 billion won of which indirect output effect is 3,982.9 billion won; indirect output effect comes mainly from real estate and business services, non-metal products, metal products, electrical and electronics products, finance and insurance, wholesale and retail, petroleum and coal; the total amount of value-added effect is 3,376 billion won and total import effect is 726 billion won. Employment effect including self-employed and unpaid family supporters with paid laborers is 79,203.7 people of which paid laborers comprise 67,547.7 people.