• Journal of Korean Society of Steel Construction
• /
• v.21 no.4
• /
• pp.421-432
• /
• 2009

In this study, push-out and static loading tests were conducted to evaluate the behavioral characteristics of composite beams with a perfobond rib shear connector. The shear capacity of the perfobond rib was found to be proportional to its concrete strength, which is in turn affected by the increase in the concrete end-bearing strength and concrete dowel action to resist the shear force. The relative slips of the push-out specimen, however, which was used to assess the ductility of the shear connector, increased to some extent, but it no longer increased when it reached the critical concrete strength because of the flexibility of the transverse rebar in the rib hole. The static-loading-test results revealed a crack on the concrete slab in the composite beam with a perfobond rib on the side of the rib hole and transverse rebar for the applied moment and shear force to the rib hole, depending on the static loading. The shear resistance characteristics of the perfobond rib shear connector were found to resist the shear force from the relative slip on the interface of the composite beam. Thus, the sectional effect of the shear connector to the composite beam with a perfobond rib should be considered when designing the composite beam because the behavior of the composite beam can change owing to the shear connector.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.11
• /
• pp.1486-1490
• /
• 2007

This study was performed to evaluate the effect of the fermented beef rib sauce (FBS) on the change of quality characteristics and sensory properties of aged and seasoned beef rib with FBS. The FBS was manufactured by fermentation with Zygosaccharomyces rouxii Y-80 yeast in raw sauce ingredients. The decreasing changes of pH of seasoned beef rib with FBS showed a similar pattern as compared with seasoned beef rib by non-fermented beef rib sauce (NFBS) during aging periods. The cooking loss of the seasoned beef rib with FBS and NFBS exhibited minor changes, respectively. Water holding capacity of the seasoned beef rib with FBS was nearly unchanged, but that of the seasoned beef rib with NFBS increased from 83% to 91% after 5 day aging. Shear forces of the seasoned beef rib with FBS were lower than those of the seasoned beef rib with NFBS. The yellowness and lightness of the seasoned beef rib with FBS decreased as compared with the seasoned beef rib with NFBS, but redness of the seasoned beef rib with FBS was more stable than that of the seasoned beef rib with NFBS. The sensory evaluation indicated that color, aroma and overall acceptability of the seasoned beef rib with FBS were scored relatively higher than those of the seasoned beef rib with NFBS.

• The Research Journal of the Costume Culture
• /
• v.13 no.1
• /
• pp.47-59
• /
• 2005

This study aims to measure stretch rate of standard weight in the $2{\times}1$ rib stitch and $2{\times}2$ rib stitch, and to apply features of rib stitch to the knit pattern. The reviewer examined the sample knit for test with 100% wool, $2/48's{\times}2$, 12 gauge, and then made knit patterns and sample clothes for test considering stretch rate of standard weight of 10gf, 15gf, 20gf, 25gf based on the results from the former test, and finally estimated the try-outs for sample clothes. This study came out with the following results: From the functional estimate of knit patterns made by standard stretch rate of each stitch, the 20gf weight sample clothes of $2{\times}1$ and $2{\times}2$ rib stitchs were in high estimate. For the bust, B/4~ -4.6cm knit pattern was made of $2{\times}1$ rib stitch, B/4~5.3cm of $2{\times}2$ rib stitch. In conclusion, because $2{\times}1$ and $2{\times}2$ rib stitchs has the much higher stretch rate in the direction of the course than $0{\times}0$ ad $1{\times}1$ rib stitchs, high stretch rate of standard weight should be applied to the case of making knit wear. It is expected that this will lead stable sizing and measurement system when used in making knit patterns, and satisfy knit wearers' various needs.

• Korean Journal of Microbiology
• /
• v.38 no.3
• /
• pp.173-179
• /
• 2002

The functions of riboflavin synthesis genes ( ribI,II,III and IV) found immediately downstream of luxG in the lux operon from Photobacterium species were identified using the biochemical and genetical analysis. The ribI-III gene codes for protein corresponding to that coded by the second (riboflavin synthase), third (3,4-dihydroxy 2-butanone 4-phosphate synthase/GTP cyclohydrolase II) and fourth (lumazine synthase) gene, respectively, of Bacillus subtilis rib operon with the respective gene procuct sharing 41-50% amino acid sequence identity. Unexpectedly, the sequence of the ribIV product of Photobacterium phosphoreum does not correspond in sequence to the protein encoded by the fifth rib gene of Bacillus subtilis. Instead the gene (ribIV) codes for a polypeptide similar in sequence to GTP cyclohydrolase II of Escherichia coli and the carboxy terminal domain of the third rib gene from Bacillus subtilis. Complementation of Escherichia coli riboflavin auxotrophs showed that the function of the gene products of ribII and ribIV are DHBP synthase and GTP cyclohydrolase II, respectively. In addition the experiment, showing that increase in thermal stability of riboflavin synthase coded by ribIon coexpression with ribIII, provided indirect evidence that the latter gene codes for lumazine synthase.

• Journal of Trauma and Injury
• /
• v.30 no.4
• /
• pp.179-185
• /
• 2017

Purpose: Rib fracture is the most common complication of blunt thoracic trauma. We investigated the effect of rib fracture on pulmonary function in the conservatively treated patients. Methods: From January 2000 to February 2017, we reviewed the records of 72 patients with rib fracture and pulmonary function tests were performed. According to the number of rib fractures, patients were classified into two groups: less than six fractured ribs (group A) and more than six fractured ribs (group B). The groups were compared concerning demographics, underlying diseases, associated thoracic injuries, surgery, mechanical ventilator times, days spent in the intensive care unit and pulmonary function test. Results: There were no statistically significant differences in the demographic data between the two groups. Mean hospitalization was 13.5 days in group A and 27.0 days in group B (p<0.001). There was no statistically significant difference between the two groups in the pulmonary function test. Conclusions: We conclude that pulmonary function is restored by conservative treatment in patients with rib fractures even if the number of rib fractures increases. In patients with multiple rib fractures, studies comparing open rib fixation and conservative treatment of long term pulmonary function are required.

• Journal of Chest Surgery
• /
• v.50 no.4
• /
• pp.229-234
• /
• 2017

Rib fractures are a common injury resulting from blunt chest trauma. The most important complications associated with rib fractures include death, pneumonia, and the need for mechanical ventilation. The development of new osteosynthesis materials has stimulated increased interest in the surgical treatment of rib fractures. Surgical stabilisation, however, is not needed for every patient with rib fractures or for every patient with flail chest. This paper presents an easy-to-use evidence-based algorithm, developed by the authors, for the treatment of patients with flail chest and isolated rib fractures.

• Tuberculosis and Respiratory Diseases
• /
• v.48 no.1
• /
• pp.45-53
• /
• 2000

Background: The literature on variations of rib is limited. Very little has been written in the radiological journal of this country on the subject. It seemed of interest to investigate the nature and incidence of congenital variations in a series of routine chest roentgenograms. The topic of rib variations has not been covered extensively in the radiological journals in Korea. This has presented an opportunity to investigate the nature, type, shape and incidences of congenital rib variations in normal Korean adults from a series of routine roentgenograms. Methods: Chest radiographs of 5,000 adults, who visited our hospital for a routine check-up or for employment physical examinations from January 1996 to September 1998, were consecutively reviewed. The sex distribution consisted of 2,827 male males and 2,173 female females(ratio of 1.3:1) with the age range aged between 19 and 65 years(mean age: 34.6 years) were included. The chest PAs were analyzed for the presence, type, location, and shape of the rib variations. From this data the incidence of each type of variations was calculated. Results: Seventy-six of the 5,000 adults(1.52%), 63 male(2.23%) and 13 female(0.6%), showed 88 cases of rib variation(Table 1). The most common variation was the bifid rib(n=35), followed by hypoplasia of the rib(n=22), flaring of the rib(n=18), bridging of the ribs(n=7), cervical ribs(n=3), and fusion of between ribs(n=3)(Table 2). The bifid rib(Table 1) was found most frequent in the right fourth rib(12/35, 34.3%), followed by the left fifth rib(6/35, 17.1%) and right third rib(6/35, 17.1%). Hypoplasia of the rib was common in first rib(20/22, 90.9%). Flaring of the rib was common at fourth rib(8/18, 44.4%, right and left combined), and bridging between ribs was common between first and second rib(3/7, 42.9%). Conclusion : The percentage of incidence of rib variations in adults was 1.52%. Bifid rib was the most common variation, followed by hypoplasia, flaring, bridging, cervical rib, and fusion of ribs, in decreasing order.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.10a
• /
• pp.332-337
• /
• 2009

Recently, boss and rib test based on backward extrusion process was proposed to quantitative evaluate the interfacial friction condition in bulk forming process. In this test, the tube-shaped punch with hole pressurizes the workpiece so that the boss and rib are formed along the hole and outer surface of the punch. It was experimentally and numerically revealed that the height of boss is higher than that of the rib under the severe friction condition. This work is focused on the effect of the punch design and friction condition on deformation pattern in boss and rib test. From the boss and rib test simulations, it was found that there is slight variation in both the heights of boss and rib according to the length of punch land, nose radius, and face angle. However the hole diameter of the punch and the clearance between the punch and die have a significant influence on the heights of the boss and rib. In addition, the effect of flow stress was also investigated on the deformation patterns through FE simulations.

• Journal of computational fluids engineering
• /
• v.19 no.4
• /
• pp.14-19
• /
• 2014

This study conducts shape optimization of rib turbulator on the internal cooling passage that has triangular cross-section of high pressure turbine nozzle. During optimization, various types of rib turbulator including angled, V-shaped, A-shaped and angled rib with intersecting rib are considered. Each type of rib turbulator is parameterized with attack angle(s), rib height, spacing ratio and bending/intersecting location. For optimization, Design of Experiment (DOE) and Kriging surrogate model are used to utilize computational resource more efficiently and Genetic Algorithm (GA) is used to search the optimum points. As a result, Pareto front of each type of rib turbulator with friction factor that relates to pressure drop in cooling passage and spatially averaged Nusselt number that relates to heat transfer on the wall is drawn and optimum points on the Pareto front are suggested.

• Journal of Chest Surgery
• /
• v.28 no.9
• /
• pp.847-850
• /
• 1995

For the purpose of evaluation of clinical characteristics in multiple rib fracture due to accident , 24 cases treated by surgical rib fixation using Judet`s strut for multiple rib fracture and flail chestduring the period from June 1993 to October 1994 were reviewed. There were 17 males and 7 females.They ranged in age from 19 years old to 56 years old. The causes of rib fracture were traffic accident in 18 cases, fall down in 3 cases, compression in 2 cases stab wound in 1 case. The number of rib fracture were five in 7 cases, six in 5 cases, four in 5 cases, three in 3 cases. Associated intrathoracic injuries were hemopneumothorax in 12 cases, hemothorax in 10 cases, lung laceration or hemorrhagic contusion in 7 cases. Associated extrathoracic injuries were abdominal injuries in 21 cases, orthopedic problem in 7 cases, head trauma in 4 cases. The most common fractured site was posterolateral portion of the ribs. The causes for operation were flail chest, severe rib displacement and pain, hemothorax or hemopneumothorax with continuous air leakage and stab wound. There were 6 postoperative complications ; one with hydrothorax, two with fibrothorax, two with wound infection and one case of death due to multiful organ failure. Postoperatively, all patients became comfortable and complained less painful. Twenty patients restored spontaneous breathing without ventilator support, three patients were ventilated during a day and one patient expired after 2 days. There were no morbidity and mortality related to operation.