• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1453-1460
• /
• 2003

The present study investigates the effects of rib arrangements and aspect ratios of a rectangular duct simulating the cooling passage of a gas turbine blade. Two different V-shaped rib configurations are tested with the aspect ratios (W/H) of 3 to 6.82. One is the continuous V-shaped rib configuration with $60^{\circ}$ attack angle, and the other is the discrete V-shaped rib configuration with $45^{\circ}$ attack angle. The square ribs with the pitch to height ratio of 10.0 are installed on the test section in a parallel arrangement for both rib configurations. Reynolds numbers based on the hydraulic diameter are changed from 10,000 to 30,000. A naphthalene sublimation method is used to measure local heat/mass transfer coefficients. For the continuous V-shaped rib configuration, two pairs of counter-rotating vortices are generated in a duct, and high transfer region is formed at the center of the ribbed walls of the duct. However, for the discrete V-shaped rib configuration with $45^{\circ}$ attack angle, complex secondary flow patterns are generated in the duct due to its geometric feature, and more uniform heat/mass transfer distributions are obtained for all tested cases

• 소성∙가공
• /
• 제18권8호
• /
• pp.640-645
• /
• 2009

Recently, boss and rib test based on backward extrusion process was proposed to quantitatively evaluate the interfacial friction condition in bulk forming process. In this test, the tube-shaped punch with hole pressurizes the workpiece so that the boss and rib are formed along the hole and outer surface of the punch. It was experimentally and numerically revealed that the height of boss is higher than that of the rib under the severe friction condition. This work is focused on the effect of the punch design and flow stress on deformation pattern in boss and rib test. From the boss and rib test simulations, it was found that there is slight variation in both the heights of boss and rib according to the length of punch land, nose radius, and face angle. However the hole diameter of the punch and the clearance between the punch and die have a significant influence on the calibration curves showing the heights of the boss and rib. In addition, the effect of flow stress on the calibration curves was investigated through FE simulations. It was found that there is no effect of strength coefficient of the workpiece on the calibration curves for estimation of friction condition. On the other hand, the strain-hardening exponent of the workpiece has a significant influence on the calibration curve.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2448-2453
• /
• 2008

The present study numerically investigates the flow and heat transfer characteristics of rib-induced secondary flow in a cooling channel with staggered V-shaped ribs, extruded on both walls. The rib-height-to-hydraulic diameter ration (h/$D_h$) is 0.17; the rib pitch-to-height ratio (p/h) equals 2.8; the Reynolds number is 50,000. Shear stress transport (SST) turbulence model is used as a turbulence closure. The present results are compared with those for a continuous V-shaped rib. Computational results show that, for average heat transfer rate the staggered V-shaped rib gives about 2.5 times higher values than the continuous V-shaped rib, while, for the streamwise pressure drop the former gives about 5 times higher values than the latter. Consequently, for the thermal performances, based on the equal pumping power condition, the staggered one gives about 2 times higher values than the continuous one. Also, for the staggered V-shaped rib, complex secondary flow patterns are generated in the duct due to the snaking flow in the streamwise direction, and more uniform heat transfer distributions are obtained.

• Journal of Chest Surgery
• /
• 제46권2호
• /
• pp.130-134
• /
• 2013

Background: Rib fractures are the most common type of thoracic trauma and cause other complications. We explored the risk factors for pneumonia in patients with multiple rib fractures. Materials and Methods: Four hundred and eighteen patients who visited our hospital with multiple rib fractures between January 2002 and December 2008 were retrospectively reviewed. Chest X-rays and chest computed tomography were used to identify injury severity. Patients with only a single rib fracture or who were transferred to another hospital within 2 days were excluded. Results: There were 327 male patients (78%), and the median age was 53 years. The etiologies of the patients' trauma included traffic accidents in 164 cases (39%), falls in 78 cases (19%), slipping and falling in 90 (22%), pedestrian accidents in 30 (7%), industrial accidents in 41 (10%), and assault in 15 (4%). The median number of rib fractures was 4.8. Pulmonary complications including flail chest (2.3%), lung contusion (22%), hemothorax (62%), pneumothorax (31%), and hemopneumothorax (20%) occurred. Chest tubes were inserted into the thoracic cavity in 216 cases (52%), and the median duration of chest tube insertion was 10.26 days. The Injury Severity Score (ISS) and rib score had a median of 15.27 and 6.9, respectively. Pneumonia occurred in 18 cases (4.3%). Of the total cases, 33% of the cases were managed in the intensive care unit (ICU), and the median duration of stay in the ICU was 7.74 days. Antibiotics were administered in 399 patients (95%) for a median of 10.53 days. Antibiotics were used for more than 6 days in 284 patients (68%). The factors affecting pneumonia in patients with multiple rib fractures in multivariate analysis included age (p=0.004), ISS (p<0.001), and rib score (p=0.038). The use of antibiotics was not associated with the occurrence of pneumonia (p=0.28). In-hospital mortality was 5.3% (n=22). Conclusion: The factors affecting risk of pneumonia in patients with multiple rib fractures included age (p=0.004), ISS (p<0.001), and rib score (p=0.038). Elderly patients with multiple traumas have a high risk of pneumonia and should be treated accordingly.

• 한국세라믹학회지
• /
• 제40권6호
• /
• pp.553-559
• /
• 2003

PDP(Plasma Display Panel) rib은 고정세의 패턴 설계 및 복잡, 다양한 공정으로 제조되고 있다. Rib은 PDP제조 공정 및 역할상 매우 중요한 부분의 하나이며 rib의 소결 정도는 cross-talk와 같은 현상을 방지하는 데에 중요한 역할을 한다. 저렴하고 높은 양산성을 가진 rib은 주로 스크린 프린팅법에 의해 제작되지만, 인쇄, 소성 등 일련의 제조 공정을 거친 후 얻어진 수백 $\mu\textrm{m}$ 미세규격의 격벽 소결체의 소결도를 정확히 평가하기는 쉽지 않다. 본 연구에서는 rib의 소결도를 직접적 판단할 수 있는 방법에 대한 연구의 일환으로서 주로 소결 말기에 나타나는 기공의 응집, 성장을 potentiostat로 기공에서의 절연 파괴, 전계 집중의 원리를 이용함으로서 소결도를 측정했다 이 측정값은 각 온도에서 열처리한 시편에 대한 밀도값과 유사한 경향성이 나타남을 확인할 수 있었다 개기공, 폐기공의 분포에 따라 예상될 수 있는 측정오차는 온도에 따른 미세구조의 변화를 수차례의 전자 현미경 관찰을 통해 확인, 검증하여 미세규격 rib 소결도의 판단을 전기화학적 방법으로 예측 가능하다는 것을 알 수 있었다.

• 한국조리학회지
• /
• 제16권1호
• /
• pp.38-49
• /
• 2010

본 연구는 패밀리 레스토랑 인기 메뉴로서의 폭립 메뉴에 대한 품질 개선을 위한 것으로서, 현재 패밀리 레스토랑에서 판매되고 있는 폭립 소스의 이화학적, 물리학적 특성 및 고도로 훈련된 관능평가요원을 대상으로 한 관능검사를 실시하여 관능적 특성과 관능검사를 통한 폭립 소스와 폭립간의 관계에 대하여 알아보고자 하였다. 연구 결과 TGI.F 레스토랑에서 구입한 폭립과 폭립 소스의 관능적 선호도가 가장 높은 것을 알 수 있었는데, 폭립과 함께 제공되는 폭립 소스는 다른 매장소스 시료들에 비해서 짙은 색을 띠며, 짠맛은 다른 시료에 비하여 다소 염도가 높은 맛을 선호하는 것으로 보여졌으며, 단맛은 당도의 차이를 통하여 본 결과 당도가 낮은 것을 선호하는 것으로 나타났다. 점도는 진하지 않은 농도의 점도를 선호하는 것을 알 수 있었다. 폭립과 함께 폭립 소스를 함께 시식한 경우는 단맛, 짠맛, 신맛, 매운맛, 점도, 종합적인 기호도 등에서 차이는 보이는 것으로 나타났다. 또한 폭립 소스와 함께 폭립을 제공한 형태에서의 점도에 대하여 폭립 소스만을 제공한 형태에서의 상관관계를 살펴 본 결과, 폭립과 함께 제공되는 소스가 폭립과 밀접한 관계가 있는 것으로 보여지며, 이에 따른 폭립 소스의 다양화가 이루어진다면 패밀리 레스토랑에서의 폭립 메뉴의 선호도는 높아질 것으로 사료된다.

• 대한기계학회논문집B
• /
• 제24권5호
• /
• pp.744-752
• /
• 2000

The influence of arrangement and length of discrete ribs on heat/mass transfer and friction loss is investigated. Mass transfer experiments are conducted to obtain the detailed local heat/mass transfer information on the ribbed wall. The aspect ratio (width/height) of the duct is 2.04 and the rib height is one tenth of the duct height, such that the ratio of the rib height to hydraulic diameter is 0.0743. The ratio of rib-to-rib distance to rib height is 10. The discrete ribs were made by dividing each continuous rib into 2, 3 or 5 pieces and attached periodically to the top and the bottom walls of the duct with a parallel orientation The combined effects of rib angle and length of the discrete ribs on heat/mass transfer ae considered for the rib angles $({\alpha})\;of\;90^{\circ}\;and\;45^{\circ}$. As the number of the discrete ribs increases, the uniformity of the heat/mass transfer distributions increases. For $(\alpha})=90^{\circ}$, the heat/mass transfer enhancement with the discrete ribs is remarkable, while the heat/mass transfer performances are slightly higher than that of the transverse continuous ribs due to the accompanied high friction loss penalty. For $(\alpha})=90^{\circ}$, the average heat/mass transfer coefficients and the heat/mass transfer performances decrease slightly with the discrete ribs compared to the case of the angled continuous ribs.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.778-781
• /
• 2004

This paper summarizes the results of push-out test specimens with a new type of shear connector called ㄱ type perfobond rib. This connector is a flat steel plate with a number of holes punched through and strengthen rib's head part. According to experiment result, ㄱ type perfobond rib shear connector appeared that resistance force is increased than stud shear connector by $108\%$ and perfobond rib shear connector by $26\%$. The results obtained indicate that the perfobond rib connector is a viable alternative to the headed studs. An appreciable improvement in the shear capacity of the connection was observed when additional reinforcing bars were passed through the perfobond rib holes. For composite beams with concrete filled steel tubes, ㄱ type perfobond shear connectors exhibit adequate ductility and substantially higher capacities.

• 대한기계학회논문집B
• /
• 제23권1호
• /
• pp.149-157
• /
• 1999

Heat transfer in a duct is augmented remarkably by rib turbulators. However, increasing friction loss is accompanied due to ribs disturbing flows. Hence, pressure drops and heat transfer are considered simultaneously to decide heat/mass transfer performance in a rib-roughened duct. In the present study, the effects of rib cross section shape on pressure drop through a duct are investigated as well as those on heat transfer characteristics. The results show that the characteristics of heat/mass transfer and friction loss in the duct roughened with triangular ribs are similar to those with square ribs, while significantly different from those with semicircular ribs. The best performance in the duct is obtained by using semicircular shaped ribs among three types of ribs for the large rib angles of ${\alpha}{\geq}63^{\circ}$.

• 한국정밀공학회지
• /
• 제28권8호
• /
• pp.894-903
• /
• 2011

In this paper, the capability index is introduced in order to improve the reliability of new concept machine tools and the method to improve the machine accuracy from the analysis of cutting process, statistical methodology and influence factors are proposed. In addition, the rib structure of bed and column in machine tools is analyzed by using the thermal impact method in order to analogize the rib pattern which has the small thermal deformation under thermal boundary condition. In the analysis of column rib structure, thermal boundary condition is separated to heat conduction and heat transfer to appropriate real boundary condition. Finally, performance chart of bed and column rib structure is provided for designer to estimate each rib pattern and select rib structure appropriating to thermal condition.