• Transactions of the Korean Society of Automotive Engineers
• /
• v.4 no.6
• /
• pp.229-235
• /
• 1996

The tapered leaf spring is regarded as the adequate tool to improve ride quality and to reduce vehicle weight of commercial vehicles. These effects are due to minimizing the contact area of each leaf by reducing the number of leaves and by optimizing the thickness profile of each leaf. But in adapting the tapered leaf spring to improve ride quality, we often have some problems of bad pitching and bouncing motion. This paper shows the basic properties of tapered leaf spring by rig tests and how to improve ride quality of a vehicle with tapered leaf springs, compared with multi-leaf spring. From the results of vehicle tests and rig tests it is concluded that the ride quality was effected by the dynamic spring rate and the friction of the tapered leaf spring.

• International Journal of Automotive Technology
• /
• v.8 no.1
• /
• pp.103-109
• /
• 2007

The nonlinear characteristics of a suspension is directly related to the ride quality of a passenger car. In this study, the nonlinear characteristics of a spring and a damper of a passenger car is analyzed by dynamic experiments using the MTS single-axial testing machine. Also, a mathematical nonlinear dynamic model for the suspension is devised to estimate the ride quality using the K factor. And the effect on the variation of the parameters of the suspension is examined. The results showed that the dynamic viscosity of the oil in a damper was the parameter that most influeced the ride quality of a passenger car for the ride quality of a passenger car.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.838-843
• /
• 2005

The nonlinear characteristics of a suspension is directly related to the ride quality of a passenger car. In this study, a dynamic experiment for a spring and a damper of a passenger car is performed to analyze the nonlinear characteristics using MTS 1-axial testing machine and a mathematical nonlinear dynamic suspension model based on experimental data is devised to estimate the ride quality using Billings' method. The devised nonlinear model is applied to the ride quality analysis using K factor and the effect of suspension parameters is examined. As a result, the friction between the cylinder and the piston of a damper is the most effective parameter for the ride quality of a passenger car.

• Journal of KSNVE
• /
• v.7 no.1
• /
• pp.143-152
• /
• 1997

This paper introduces experimental results of the ride qulaity characteristics of automotive seats fixed on the vibration table that is noving simultaneously to the three-axis in a similar way to the real running condition. Vibration experiment was carried out for five different automotive seats and four Korean individuals. The assessment of the ride quality characteristics for each seat and indiviual was made not only from the analysis of vibration measurements but also from the evaluation of weighied vibration signals, which were obtained using the frequency weighting function and the multiplication factor dependent on the position and axis of vibration exposure to wehole-body. The usefulness of those assessment results in analysis of the ride quality of seats is discussed and their limitation is also pointed out in this paper.

• Journal of Biosystems Engineering
• /
• v.17 no.4
• /
• pp.314-325
• /
• 1992

This paper reviews some relevant criteria for the evaluation of ride quality of agricultural tractors. Although there still exist many deficiences and shortcomings, ISO 2631 'Guide for the evaluation of human exposure to whole body vibration' may be the most pertinent criterion to the ride quality evaluation of tractors. The effects of ride vibrations on the human health and performance were also reviewed and summarized in general terms.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.1546-1549
• /
• 2007

A ride quality measurement was carried out for commuter and express train used in airport railway. Lateral and vertical directional average ride quality level is higher than that of longitudinal direction. Because express train is faster than commuter train, the average ride quality level of express train is higher compared to that of commuter train. The average ride quality level of commuter train is between 'good comfortable($100{\sim}105dB$)' and 'very good comfortable(below 100dB)'. The average ride quality level of express train is between 'not comfortable($105{\sim}110dB$)' and 'good comfortable($100{\sim}105dB$)'. In spite of the scheduled speed is higher(more than 70km/h for commuter train, more than 80km/h for express train) than other lines, the ride quality of airport railway train is good. The reason is that there is little gradient in rail and the radius of curvature is larger compared to that of other lines.

• International Journal of Highway Engineering
• /
• v.19 no.5
• /
• pp.97-106
• /
• 2017

PURPOSES: This study aims to evaluate the effects of vehicle dynamic behaviors on ride quality. METHODS : Simulation and field test were conducted to analyze the behavior of a driving vehicle. The simulation program CarSIM was applied and an INS (Inertial Navigation System) was used for field experiments. A small simulator was developed to simulate vehicle behavior such as roll, pitch, and bounce. The panels evaluated the ride quality in five stages from "very satisfied"to "very dissatisfied."Experiments were conducted on a total of 144 cases of vehicle behavior combinations. RESULTS :In both simulation and field tests, pitch is the largest and yaw the smallest. Especially in the field test, the amount of yaw is very low, about 7% of pitch and 18% of roll. The sensitive and extensive analysis conducted related ride quality with changing the frequency and amplitude. It was found that the most sensitive frequency range is 8 Hz across all amplitudes. Moreover, the combination of the roll and bounce was most sensitive to the ride quality at the low-frequency range. CONCLUSIONS : This result show that the vertical vehicle behavior (bounce) as well as the rotational behavior (roll and pitch) are highly correlated with ride quality. Therefore, it is expected that a more reasonable roughness index can be developed through a combination of vertical and rotational vehicle behavior.

• Journal of KSNVE
• /
• v.7 no.6
• /
• pp.1025-1030
• /
• 1997

This paper introduces the experimental results of ride values assessed for several passenger cars. The experiment was conducted at four vehicles on two roads for three persons by measuring the acceleration in the 12-axis of human. The results include the comparison of the ride values, such as the component ride values, overall ride value, and seat effective amplitude transmissibiity. It is proved that acceleration between 1 and 15Hz is the most significant in evaluating the ride quality. The contribution of the acceleration in each measurement axis is quantified from the component ride value. SEAT value shows a relatively low sensitivity for the road condition and human mass.

• Journal of KSNVE
• /
• v.10 no.5
• /
• pp.811-818
• /
• 2000

This paper deals with the design of a car seat for enhancing dynamic ride quality using a Biomechanical Model that was developed from the measured whole-body vibration characteristic. For evaluation of seat ride quality, the z-axis acceleration of floor as an input of biomechanical model was measured on a driving passenger car at highway and national road. Form the floor signal and the estimated biomechanical model, overall ride value evaluated by parameter study of seat stiffness and damping. The result shows that overall ride value decreases as the seat damping increases and the sear stiffness decreases. A lot of polyurethane foams were manufactured and tried to evaluate dynamic ride quality of a seat. It is found that stiffness and damping of a seat show a linear relationship, which means the stiffness and damping are not independent each other, So the optimal seat parameters within practically achievable space are determined.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.23 no.1
• /
• pp.65-73
• /
• 2015

The ride quality has become a key component of not only design but car selling as the technology developed and the requirement of passengers grew up. Thus car industry invests lots of time and cost for the higher ride quality. The evaluation of the ride quality mainly is expressed by subjective element that drivers felt. In this paper, instead of the original transfer path analysis method, relatively new methods such as OPAX(Operational path analysis with eXogeneous inputs) and OTPA(operational transfer path analysis) are used for analyzing the main hindrance element of ride quality. With those new method, contribution rate of all paths that the vibration propagate along analyzed after driving test on the roads having different characteristic. The comprehensive hindrance elements of ride quality are deduced from the contribution rate and the improve experiment by changing one of hindrance elements for higher ride quality.