• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.11a
• /
• pp.519-522
• /
• 2004

The purpose of this research is to design a road using digital photogrammatry method to generate DEM(digital elevation model) and digital ortho image based on GSIS which was applied to the road simulation. The example study area was the suburbs of Jeju city. To this study, 1/5,000 digital map and GSIS technique were used for optimum road design of the island based on Arc View software. Using this software we can Set an overlay map by combination of hill shade map, slope map, aspect map, and building buffer map. Based on this overlap map, we designed the best road line and along this line we performed three dimensional road simulation using Microstation CAD and Inroads road design programs. From the results, we found that the DEM and digital ortho image acquired from stereoairphoto using digital photogrammatry was satisfied for choosing the best roadline and the developed three dimensional road simulation technique using GSIS technique was very useful to estimate the reasonable road design before the real road construction works.

• Journal of Environmental Science International
• /
• v.13 no.6
• /
• pp.489-495
• /
• 2004

The purpose of this research is to apply GIS(Geographic Information System) for the road simulation and find some benefits analysis for the design processes. The northern Jeju island was selected as a case study. The 1/5,000 digital map and GIS technique were used for optimum road design of the island based on Arc View software. Using this software we can get an overlay map by combination of hill shade map, slope map, aspect map, and building buffer map. Based on the overlay map, we designed the optimum road line and performed three dimensional simulation. From the results, we found that the developed three dimensional road simulation technique using GIS technique that was very useful tool to estimate the reasonable road design before the real road construction works.

• Journal of Positioning, Navigation, and Timing
• /
• v.9 no.1
• /
• pp.23-31
• /
• 2020

It is essential to estimate the vehicle localization for an autonomous safety driving. In particular, since LIDAR provides precise scan data, many studies carried out to estimate the vehicle localization using LIDAR and pre-generated map. The road marking always exists on the road because of provides driving information. Therefore, it is often used for map information. In this paper, we propose to generate the Gaussian mixture map based on road-marking information and localization method using this map. Generally, the probability distributions map stores the single Gaussian distribution for each grid. However, single resolution probability distributions map cannot express complex shapes when grid resolution is large. In addition, when grid resolution is small, map size is bigger and process time is longer. Therefore, it is difficult to apply the road marking. On the other hand, Gaussian mixture distribution can effectively express the road marking by several probability distributions. In this paper, we generate Gaussian mixture map and perform vehicle localization using Gaussian mixture map. Localization performance is analyzed through the experimental result.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.4
• /
• pp.379-388
• /
• 2012

The Road Name Address system has begun to be applied and widely used since 2011. However, the Digital Map, or the national representative basic map, has no reference to the Road Name Address system. It causes some difficulties to use the Digital Map under the Road Name Address system. In this paper, we suggest a method for generating the expanded Digital Map by adding information about Road Name Address system into the objects of the Digital Map. First, object matching pairs between the road section layer from the Road Name Address Map and the road centerline layer from the Digital Map are found. Then attributes to be copied from the Road Name Address map to the Digital Map are extracted by comparing their attribute tables. Finally the extracted attributes are copied from the Road Name Address Map to the Digital Map. The expanded road centerline layer of the Digital Map then has attributes about road name according to the Road Name Address system, so that the georeferencing of the Digital Map according to the Road Name Address system becomes possible.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.5 no.2
• /
• pp.223-230
• /
• 2015

Due to the conversion from the existing address system to road name address system, the versatility of the road name address from the public and private sectors is increasing gradually. Therefor, the reliability of the road name address basic map, of the default data is also an urgent need, this means the accuracy of the data. But, road name address basic map is production time due to the use of different map accuracy is to fall, so is also the situation insufficient of utilization. This study Construction of identify each attempt by the road name address basic map and analysis the location accuracy of road name address basic map. As a result, the RMSE of cadastral survey results showed that appears lower than the RMSE of digital map survey results. The judgment can be utilized as the basis for the proposed improvements for the road name address basic map.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.11a
• /
• pp.311-316
• /
• 2008

It is needed to assess the impact of the road traffic noise for city planning. In Korea, the current noise impact assessment h3s not yet considered the impacts of the multiple reflection, the deflection and the ground attenuation caused by buildings and other obstacles. A noise map is useful tool to solve this problems. But before everything else, suitability of noise map must be assessed for variety of geometry conditions. In this study, we assessed suitability of road traffic noise map by compared measured noise levels with predicted noise levels from each road traffic noise map for Site A, B and C.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.37 no.2
• /
• pp.91-97
• /
• 2019

In automatic map generalization, the formalization of cartographic principles is important. This study proposes and evaluates the selection method for road network generalization that analyzes existing maps using reverse engineering and formalizes the selection rules for the road network. Existing maps with a 1:5,000 scale and a 1:25,000 scale are compared, and the criteria for selection of the road network data and the relative importance of each network object are determined and analyzed using $T{\ddot{o}}pfer^{\prime}s$ Radical Law as well as the logistic regression model. The selection model derived from the analysis result is applied to the test data, and road network data for the 1:25,000 scale map are generated from the digital topographic map on a 1:5,000 scale. The selected road network is compared with the existing road network data on the 1:25,000 scale for a qualitative and quantitative evaluation. The result indicates that more than 80% of road objects are matched to existing data.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.766-771
• /
• 2002

Automatic change detection based on the vector-to-raster comparison is hard especially in high-resolution image. This paper proposes a method to designate roads in high-resolution image in sequential manner using the information from vector map in which Hough transform is used for reliability. By its linearity, the road of urban areas in a vector map can be easily parameterized. Following some pre-processing to remove undesirable objects, we obtain the edge map of raster image. Then the edge map is transformed to a parameter space to find the selected road from vector map. The comparison is done in the parameter space to find the best matching. The set of parameters of a road from vector map is treated as the constraints to do matching. After designating the road, we may overlay it on the raster image for precise monitoring. The results can be used for detection of changes in road object in a semi-automatic fashion.

• Journal of Korean Society for Geospatial Information Science
• /
• v.2 no.2 s.4
• /
• pp.89-98
• /
• 1994

Digital road map - which plays an essential role in giving accurate location of the vehicle, optimum route guidance, destination searching, and topographic feature query functions - is the most fundamental element of the vehicle navigation system. Unfortunately, there is not a nation-wide digital map in Korea such as U.S. TIGER fie, that is easily applied to digital road database production. Therefore, producing new digital road map is inevitable in Korea For establishing digital road map for vehicle navigation, this paper puts forth the necessary condition to stabilize the digital road map qualify, and to keep up the compatibility and the economical use. As a result, the standards of coordinate and map accuracy arc presented, and the Items and the structures of database arc decided.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.867-871
• /
• 2007

Noise map is very efficient tool to evaluate the road traffic noise. However, calculation time and accuracy of noise map heavily depend on the grid size of noise map. In this study, effects of grid size on the prediction results of road traffic noise map have been investigated in detail for urban and rural areas, respectively, and efficient grid size for the noise map has been proposed.