• Title/Summary/Keyword: Root zone environmental

Search Result 60, Processing Time 0.037 seconds

Effect of Root Zone Temperature on Root and Shoot Growth of Strawberry (딸기의 뿌리 및 지상부 생육에 미치는 근부온도의 영향)

  • Jun, Ha-Joon;Hwang, Jin-Gyu;Son, Mi-Ja;Choi, Dong-Jin
    • Journal of Bio-Environment Control
    • /
    • v.17 no.1
    • /
    • pp.14-19
    • /
    • 2008
  • The experiment was investigated the effects of lower root zone temperature on shoot and root growth of 'Akihime' strawberries in aeroponics in cold season. Root growth was decreased with decrease of root zone temperature, especially in lateral roots. Elongation of main roots was highest in $18^{\circ}C$ of root zone temperature. Number of lateral roots and length of lateral roots were lowest in $8^{\circ}C$ of root zone temperature. Lower root zone temperature resulted significantly in decrease of fresh weight of root and shoot and leaf area of strawberry. But there were no significant statistical differences in shoot fresh weight and leaf area in $8^{\circ}C$ and $13^{\circ}C$ of root zone temperature. Leaf length, leaf width and number of leaves of strawberry were decreased in lower root zone temperature. The results of this experiment will be utilized in the winter season cultivation for strawberry in hydroponics.

Effect of Root Zone Cooling on Growth Responses and Tuberization of Hydroponically Grown 'Superior' Potato (Solanum tuberosum) in Summer

  • Chang, Dong-Chil;Jeong, Jin-Cheol;Lee, Yong-Beom
    • Journal of Bio-Environment Control
    • /
    • v.15 no.4
    • /
    • pp.340-345
    • /
    • 2006
  • A potato (Solanum tuberosum L. cv. Superior) cultivar was grown in aeroponic cultivation system to investigate the effect of root zone cooling in summer. Based on their nutrient uptake, growth responses, and tuberization, the possibilities for potato seed production were determined. Although shoot growth and early tuberization increased in the conventional non-cooling root zone system (root zone temperature of $25\pm2^{\circ}C$), stolen growth, photosynthesis, transpiration rate and number of tubers produced were higher in the cooling root zone system ($20\pm2^{\circ}C$) than in the non-cooling system. Increasing root zone temperature above $25^{\circ}C$ stimulated absorption of K more than T-N, P, Ca, Fe and Mn. On the other hand, root zone temperatures in the range of $20^{\circ}C$ to $25^{\circ}C$ did not affect Mg contents. The lower uptake and supply to leaves of T-N, Fe and Mn at the high root zone temperature promoted early tuberization and advanced haulm senescence. The results stress the importance of keeping root zone temperature to as low as below 20, particularly in summer under temperate Bone.

Effect of Root-zone Local Cooling on Seedling Growth of Tomato (근권부 국부 냉방이 토마토 묘 생육에 미치는 영향)

  • Kim, Eun Ji;Hwang, Hyunseung;Ju, Se Hun;Na, Haeyoung
    • Journal of Bio-Environment Control
    • /
    • v.31 no.4
    • /
    • pp.286-291
    • /
    • 2022
  • The effect of root-zone local cooling on seedling growth of tomato was investigated. Lower pipe cooling was used for local cooling of the root zone, and the root zone temperature was set at 20 and 25℃. There was no difference in plant height, root length, and leaf number according to local cooling temperature. Leaf area, fresh weight, dry weight, and chlorophyll content of the shoot and root was higher in the 25℃ than those of 20℃ at 28 DAS. These results showed that cooling for seedling growth of tomato 25℃ is sufficient considering energy efficiency. This study will be helpful in the development of local cooling technology that can reduce the energy required for cooling during the production of tomato seedlings in the high temperature season.

2-Dimensional Moisture Migration Modeling in Drip-Irrigated Root Zone (점적관개(點滴灌漑)에서 토양수분 이동 현상에 대한 2차원 모델 개발 연구)

  • Ro, Hee-Myong;Kim, Seung-Hyun
    • Korean Journal of Soil Science and Fertilizer
    • /
    • v.30 no.4
    • /
    • pp.314-327
    • /
    • 1997
  • A 2-dimensional soil water flow model was developed to describe the migration of soil moisture in drip-irrigated root zone employing cylindrical coordinate system. Several natural phenomena were incorporated into the model such as transpiration, various types of evaporation, and ponding due to the increase in irrigation rate. Model was solved numerically by finite difference method. The model was verified in several ways leading to the conclusion that it can describe the soil moisture migration in drip-irrigated root zone fairly well. From sensitivity analysis, vertical migration of soil moisture was found to move faster than the horizontal one, which indicates the vertical location just under the dripping point are adequate for measuring points of soil moisture. The pot shape of soil moisture in irrigated zone was proved to be caused by evaporation at the soil surface. Also, it was found that the hydraulic conductivity has greatly influential to the soil moisture migration, and that the soil moisture continues to migrate vertically after irrigation stops.

  • PDF

Effect of Root Zone Temperature on the Growth and Quality of Single-Stemmed Rose in Cutted Rose Production Factory (식물생산공장식 양액재배시 근권부 온도가 장미의 생육 및 품질에 미치는 영향)

  • Lee Hye Jin;Lee Yong-Beom;Bae Jong Hyang
    • Journal of Bio-Environment Control
    • /
    • v.13 no.4
    • /
    • pp.266-270
    • /
    • 2004
  • A rose factory type is a system that enables year-round, planned and mass production of high quality cut-rose. Conversion of a conventional system to a rose factory is essential to increase cut-rose export. Controlling root Bone in culled rose production factory is very important for economic and efficient production of rose. This study was conducted to determine optimum root zone temperature of nutrient solution in single-stemmed rose production system. The optimum temperature of the nutrient solution for growth, photosynthetic and transpiration rates for 'Red Velvet' was $15\~20^{\circ}C$. Whereas the optimum temperature for 'Vital' was $10\~15^{\circ}C$. However, growth was almost sloped at $30^{\circ}C$, resulting in concluding the adaptation of 'Vital' to high temperature was poor as compared with 'Red Velvet'.

The Evaluation of Mixed Welded SM 490A Steel by Acoustic Emission (3) (음향방출법에 의한 SM 490A 강의 복합용접성 평가 (3))

  • 이장규;인승현;우창기;박성완;김봉각
    • Proceedings of the Korean Society of Machine Tool Engineers Conference
    • /
    • 2003.10a
    • /
    • pp.289-294
    • /
    • 2003
  • The object of this study is to investigate the effect of compounded welding by using acoustic emission (AE) signals fur weld heat affected zone (HAZ) in tensile testing. This study was carried out a SM 490A high tension steel for electronic shielded metal are welding (SMAW), $\textrm{CO}_2$ gas arc welding and TIG welding. And correspondingly, the root openings are 3, 4 and 2.8mm. Data displays are based on the measured parameters of the AE signals, along with environmental variables such as time and load. These history plots give us useful and powerful information to analyze the results of material evaluation testing.

  • PDF

Elasto-plastic Joint Finite Element Analysis of Root-pile Using the Direct Shear Test Model (직접전단시험모델에 의한 뿌리말뚝의 탄소성조인트 유한요소해석)

  • Han, Jung-Geun
    • Journal of the Korean Society of Environmental Restoration Technology
    • /
    • v.5 no.4
    • /
    • pp.19-30
    • /
    • 2002
  • The stability of slope using root-pile like to the reinforcements is affected by the interaction behavior mechanism of soil-reinforcements. Through the studying on the interaction in joint of its, therefore, the control roles can be find out in installed slope. In study, the stress level ratio based on the insert angle of installed reinforcements in soil used to numerical analysis, which was results from the duty direct shear test in Lab. The maximum shear strain variation on the reinforcements was observed at insert angle, which was approximately similar to the calculated angle based on the equation proposed by the Jewell. The elasto-plastic joint model on the contact area of soil-reinforcements was presumed, the reinforced soil assumed non-linear elastic model and the reinforcements supposed elastic model, respectively. The finite element analysis of assumed models was performed. The shear strain variation of non-reinforced state obtained by the FEM analysis including elasto-plastic joint elements were shown the rationality of general limit equilibrium analysis for the slope failure mode on driving zone and resistance zone, which based on the stress level step according to failure ratio. Through the variation of shear strain for the variation of inserting angle of reinforcements, the different mechanism on the bending and the shear resistance of reinforcements was shown fair possibility.

Effect of Cooling Timing in the Root Zone on Substrate Temperature and Physiological Response of Sweet Pepper in Summer Cultivation (여름 파프리카 수경재배에서 근권 냉방 시간이 근권 온도와 생리적 반응에 미치는 영향)

  • Choi, Ki Young;Ko, Ji Yeon;Yoo, Hyung Joo;Choi, Eun Young;Rhee, Han Cheol;Lee, Yong-Beom
    • Horticultural Science & Technology
    • /
    • v.32 no.1
    • /
    • pp.53-59
    • /
    • 2014
  • This study aimed to determine an appropriate cooling timing in the root zone for lowering substrate temperature and its effect on physiological response of sweet pepper (Capsicum annum L. 'Orange glory') grown on coir substrate in summer, from the July 16 to October 15, 2012. Daily temperature of substrate, root activity, leaf water potential, first flowering date, and the number of fruits were measured by circulating cool water through a XL pipe in the root zone during either all day (all-day) or only night time (5 p.m. to 3 a.m.; night) from the July 23 to September 23, 2012. For comparison, no cooling (control) was also applied. Between the $23^{rd}$ of July and $31^{st}$ of August (hot temperature period), daily average temperatures in substrates were $25.6^{\circ}C$, $26.1^{\circ}C$, and $29.1^{\circ}C$ for the all-day and night treatment, and control respectively. About 1.8 to $5^{\circ}C$ lower substrate temperature was observed in both treatments compared to that of control. In sunny day ($600-700 W{\cdot}m^{-2}{\cdot}s^{-1}$), the highest temperature of substrate was measured between 4 p.m. and 5 p.m. under both the all-day and night treatments, whereas it was measured between 7 p.m. and 8 p.m. under the control. Substrate temperatures during the day (6 a.m. to 8 p.m.) and night (8 p.m. to 6 a.m.) differed depending on the treatments. During the day and night, averaged substrate temperature was lower about $3.3^{\circ}C$ and $4.0^{\circ}C$ for the all-day, and $2.1^{\circ}C$ and $3.4^{\circ}C$ for the night treatment, compared to that of control. In the all-day and night treatment, the TD [TD = temperature of (control)] was greater in bottom than that of other regions of the substrate. Between the day and night, no different TD values were observed under the all-day treatment, whereas under the night treatment there was difference with the greatest degree in the bottom of the substrate. During the hot temperature period, total numbers of days when substrate temperature was over $25^{\circ}C$ were 40, 23 and 27 days for the control, all-day, and night treatment, respectively, and the effect of lowering substrate temperature was therefore 42.5% and 32.5% for the all-day and night treatment, respectively, compared to that for the control. Root activity and leaf water potential of plants grown under the all-day treatment were significantly higher than those under the night treatment. The first flowering date in the all-day treatment was similar to that in the night treatment, but 4-5 day faster than in the control. Also, the number of fruits in both treatments was significantly higher than that in the control. However, there was no effect of root zone cooling on eliminating delay in fruiting caused by excessively higher air temperature (> $30^{\circ}C$), although the substrate temperature was reduced $18^{\circ}C$ to $5^{\circ}C$. These results suggest that the method of cooling root zone temperature need to be incorporated into the lowering growing temperature for growth and fruit set of health paprika.

Effects of Hydroponic Systems on Root Environments of Tomato Plant (양액재배(養液栽培) 방법(方法)이 토마토의 근권환경(根圈環境)에 미치는 영향(影響))

  • Park, Kuen-Woo;Lee, Yong-Beom;Bae, Gong-Young
    • Korean Journal of Environmental Agriculture
    • /
    • v.9 no.1
    • /
    • pp.53-59
    • /
    • 1990
  • Root zone environments in hydroponics are very important factors in crop growth, development and quality. In Korea, improvement of root zone temperature is required because of the continental climate. Therefore, this investigation was carried out to clarify the difference of root zone environments in different hydroponic systems under different climates. Tomato plants were grown in nutrient solutions at Seoul City University and Allen Cooper's. Hydroponic systems in this experiment were aeroponics, nutrient film technique(NFT), rockwool culture, sand culture and smoked rice hull culture(SRH). The decrease in temperature rapidly occured in sand culture while slowly in rockwool culture in low air temperature periods. The internal temperature of substrates of hydroponic bed were slightly changed in rockwool culture under high air temperature periods, while the duration of high temperature was longest in NFT. Electrical conductivity and pH of nutrient solution showed great changes in rockwool and aeroponics. Along the bed, the content of dissolved oxygen in nutrient solution had a tendency to decrease in NFT and DFT(Deep flow technique), while didn`t a change with aeroponics. Root activity measured by triphenyl tetrazolium chloride (TTC) was highest with aeroponics, followed by rockwool culture and NFT.

  • PDF

Effect of Mixed Bed Soil on Growth of Aerial Parts and Roots of Daughter Pants for Nursery Field Srawberry Seedling Raising with Expanded Rice-hull (딸기 팽연왕겨 차근육묘를 위한 혼합상토 조성이 자묘의 지상부 생육과 발근에 미치는 영향)

  • Park, Gab-Soon;Kim, Young-Chil;Kim, Myung-Seon;Ann, Seoung-Won
    • Journal of Environmental Science International
    • /
    • v.24 no.2
    • /
    • pp.189-196
    • /
    • 2015
  • This study was performed to identify the effect of mixed bed soil on growth of aerial parts and root zone of daughter plants for nursery field strawberry seedling raising with expanded chaff. The plant height and leaf area of daughter plants were highest or largest in the mixed soil of ERH +RH (100:0, v/v), followed by ERH+RH (75:25). The higher the mixing ratio of RH, the shorter the plant height or the smaller the leaf area. A similar tendency was observed in fresh weight. Within a root diameter of 0-0.4 mm and a root height range of 0.4-0.8 mm, root surface area and volume were statistically significantly better with treatment of ERH+RH (100:0, v/v) compared to those of roots treated with ERH+RH (75:25), ERH+RH (50:50) and ERH+RH (25:75). The growth rate of aerial parts and root zone of daughter plants were noticeably lower in two mixing ratios of 50:50 and 25:75. According to the mixing ratios of ERH+CD surface treatment, the number of roots was greatest in plants treated with ERH+CD (80:20, v/v) and ERH+CD (85:15) on August 1. However, the number of roots was highest in plants treated with ERH+CD (85:15, v/v) on August 15. Root length was longest in the plant with no treatment, and drastically shortened from ERH+CD (90:10, v/v) in both surface and mixed treatment. Although root weight showed a significant difference in ERH+CD (90:10, v/v) treatment, its increase was gradual. The rate of root growth was highest in ERH+CD (85:15). These study findings suggest that the content ratios of mixed soil ERH+RH (75:25, v/v) or below and ERH+CD (85:15) are thought to be desirable for the production of high quality seedlings.