• 한국정밀공학회지
• /
• 제14권11호
• /
• pp.84-92
• /
• 1997

The purpose of this study is to develop a geometric error model and path compensation algorithm for rotating axes of the 5-axis machine tools, by a method to calibrate a rotary table using one master ball and three LVDTs. It was developed a new methodology to measure 3 translation errors of the rotary table and with a compensation procedure for setup errors of the master ball. The method is experimentally verified using a ball-table and on-machine inspection method. The results showed that the geometric error models with the path compensation strategy can be practically used as a means for improving the accuracy of the machine tools with rotary table.

• 대한기계학회논문집
• /
• 제13권5호
• /
• pp.862-874
• /
• 1989

본 연구에서는 반경법 진원도 측정기의 회전정도와 편심에 의한 영향을 제거 하여 시험편의 형상오차와 측정기 자체의 오차특성을 분리함으로써 진원도 측정의 정도를 향상시킬 수 있는 방법에 대하여 검토하였다. 진원도의 표시법으로는 최근 최소영역법에 의해 규정되는 경우가 많으나 이는 일반적으로 많은 연산시간을 요구 하므로 비경제적인 면이 있다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.537-540
• /
• 2005

The attitude control, sensors and camera installed on the spacecraft should be located according to the system alignment requirement. The alignment measurement requirement accuracy for the sensors should be below $\pm$0.1. Therefore, Alignment Measurement System which is combined theodolite, Rotating table and digital inclinometer etc., should be used. As the measurement accuracy is required very precise, the appropriate measurement procedure and alignment angle measurement, calculation and shimming work should is accomplished. Consequently, this paper is accomplished the works to align the measurement requirement accuracy throughout alignment measurement and shimming work of installed module and sensor

• 산업경영시스템학회지
• /
• 제34권1호
• /
• pp.97-102
• /
• 2011

This study was performed to design and develop an ergonomic equipment for strawberry sorting and packing in agricultural working environments. Potential risk of work related musculo-skeletal disorders associated with farm workers performing strawberry sorting and packing was analyzed through interviews, field surveys, work measurement, and working posture evaluation. For the evaluation of working posture, we used REBA, OWAS, and RULA assessment methods to identify multi-factorial risk factors. Based on the result of comprehensive assessment, a new concept of multi-level rotating table for strawberry sorting and packing was proposed to modify awkward working postures and improve the effectiveness of the farm work. Finally, the characteristics and effectiveness of new equipment was discussed in terms of improvements in productivity, safety, and subjective ratings of farm workers. The results of analysis showed that working conditions improved significantly.

• International Journal of Precision Engineering and Manufacturing
• /
• 제8권3호
• /
• pp.20-23
• /
• 2007

To calibrate precision autocollimators, the Korean Research Institute of Standards and Science (KRISS) has built a small angle generator using a laser interferometer. The system is based on a sine bar mechanism in which the angle is determined from the ratio of two lengths. The rotational angle is measured by the angle interferometer and the heterodyne laser interferometer detects the relative displacement of two retro-reflectors attached to the rotating arm. The distance between the two retro-reflectors of the laser angle interferometer is self-calibrated by an index table positioned on the rotating arm. The resolution of the system is 0.002 seconds, and the accuracy is better than 0.04 seconds within a measuring range of $\pm$1 degree. The small angle generator can also be used with an index table that can divide one circle into 1440 angles. The combined system can generate any angle over 360 degrees to an accuracy of 0.11 seconds.

• 한국주조공학회지
• /
• 제24권5호
• /
• pp.273-280
• /
• 2004

Vibrational motions of the compaction table were investigated to select the optimal operation conditions of sand filling and compaction for the EPC process. Their modes were measured at the nine points of the table with changing the relative rotation angles between the two eccentric mass vibrators which were attached parallel beneath the table. Well-defined vibration modes were measured at the center of the table but those of left and right sides of the table were distorted regardless of rotational angle differences. The distortion of vibration modes at both sides of the table were caused by the moment generated by offset positions of two eccentric masses. It was found that the uniform vibration modes would be gathered by controlling the relative distances between the rotating axis and the center of gravity in the compaction system at the various conditions of vibration modes and rotational angle differences.

• 한국기계가공학회지
• /
• 제11권3호
• /
• pp.62-67
• /
• 2012

To realize 2-dimensional vibrational micro cutting in milling and drilling, etc. where the tools rotate, it could be a promising way to vibrate a workpiece instead of a rotating tool itself. In this study, an excitation work-table was developed using two piezoelectric materials orthogonally arranged. The trochoidal trajectory of a cutting tool which is necessary for 2D vibrational cutting is enabled in the excitation condition of higher excitation frequency and larger amplitude of vibration and the cutting condition of smaller diameter of cutting tool and lower spindle speed. The various trochoidal trajectories of a cutting tool could be generated in the excitation work-table by adjusting the input voltages to two piezoelectric materials and the phase between the two voltages and the trajectories could be readily used for the 2D vibrational micro cutting.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.310-315
• /
• 2003

This paper described that rotating test and fatigue test of a small-scale hingeless hub system with composite rectangular blades. Generally Rotating stability and fatigue test technique is one of Key-technology on test and evaluation for helicopter rotor system Rotating test of hingeless rotor system was achieved by means of rotor vibration characteristic and aeroelastic stability test GSRTS, equipped with hydraulic actuator and 6-component rotating balance was used to test hingeless rotor system especially for an observation of blade motion including flawing, lagging and feathering. Rotating test was done in hover and forward flight condition. Small-scaled blade fatigue test condition was determined by blade load analysis with the reference table of composite materials(S-N curve). Fatigue test bench was developed for the estimation of blade fatigue life, and tested its characteristic.

• 대한기계학회논문집A
• /
• 제31권4호
• /
• pp.409-416
• /
• 2007

A momentum type actuator produces force and torque disturbances as well as its designed control torque. These disturbances are ones of the largest disturbance sources inside the spacecraft, which deteriorate the pointing stability of the high precision spacecraft. The measurement and analysis of actuator disturbances are therefore imperative for such a spacecraft, and thus a three dimensional torque measurement table has been developed for that purpose. The data acquired from the measurement table are processed in the frequency domain and displayed in the power spectral density(PSD). Through this process, disturbance model parameters are obtained and used for the attitude stability simulation. The process has been adopted for the disturbance measurement of the reaction wheel, and the validity of measurements and parameter identification procedure is verified.

• 한국항공우주학회지
• /
• 제32권7호
• /
• pp.98-104
• /
• 2004

위성체 얼라인먼트 측정은 측정 정밀도가 ${\pm}0.5^{\circ}$ 이하로 매우 정밀한 것이다. 일반적으로 이러한 측정은 3대 이상의 데오드라이트를 사용하여 측정되고 있다. 그러나 위성체의 위치 안정성 등에 의해 측정 정밀도 오차가 발생될 수 있다. 이에 따라, 데오드라이트, 회전 테이블 및 전자식 수평계 등을 조합하여 새로운 얼라인먼트 측정 시스템을 개발하게 되었다. 본 논문에서 이러한 측정 시스템의 개념과 측정 방법을 기술하였고, 기존의 측정 방법보다 더 좋은 정밀도를 얻을 수 있음을 알 수 있다.