• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.5
• /
• pp.2245-2266
• /
• 2016

The hop count routing metric is widely used in routing protocols of Wireless Sensor Networks (WSNs) due to its simplicity and effectiveness. With a lower hop count route, fewer transmissions are required to send a packet from the source to the destination. This can improve the throughput of a network because fewer transmissions results in less channel contention and interference. Despite this, the hop count routing metric may not be ideal for mobile scenarios where the topology of a network changes constantly and rapidly. In this paper, we propose to increase route stability in mobile WSNs by discovering paths that are more stable during route discoveries using routing metrics. Two routing metrics were proposed, the true beauty of these routing metrics lies in the fact that they can even be used even without specialized hardware such as GPS and other sensors. We implemented the proposed routing metrics in the AODV routing protocol and found that they are highly effective and outperform other stability-based routing metrics and the hop count routing metric.

• Journal of Communications and Networks
• /
• v.14 no.5
• /
• pp.546-553
• /
• 2012

Compact routing intends to achieve good tradeoff between the routing path length and the memory overhead, and is recently considered as a main alternative to overcome the fundamental scaling problems of the Internet routing system. Plenty of studies have been conducted on compact routing, and quite a few universal compact routing schemes have been designed for arbitrary network topologies. However, it is generally believed that specialized compact routing schemes for peculiar network topologies can have better performance than universal ones. Studies on complex networks have uncovered that most real-world networks exhibit power-law degree distributions, i.e., a few nodes have very high degrees while many other nodes have low degrees. High-degree nodes play the crucial role of hubs in communication and inter-networking. Based on this fact, we propose two highest-degree landmark based compact routing schemes, namely HDLR and $HDLR^+$. Theoretical analysis on random power-law graphs shows that the two schemes can achieve better space-stretch trade-offs than previous compact routing schemes. Simulations conducted on random power-law graphs and real-world AS-level Internet graph validate the effectiveness of our schemes.

• Journal of Communications and Networks
• /
• v.6 no.3
• /
• pp.269-279
• /
• 2004

A new online multi-layer integrated routing (MLIR) scheme that combines IP (electrical) layer routing with WDM (optical) layer routing is investigated. It is a highly efficient and cost-effective routing scheme viable for the next generation integrated optical Internet. A new simplified weighted graph model for the integrated optical Internet consisted of optical routers with multi-granularity optical-electrical hybrid switching capability is firstly proposed. Then, based on the proposed graph model, we develop an online integrated routing scheme called differentiated weighted fair algorithm (DWFA) employing adaptive admission control (routing) strategies with the motivation of service/bandwidth differentiation, which can jointly solve multi-layer routing problem by simply applying the minimal weighted path computation algorithm. The major objective of DWFA is fourfold: 1) Quality of service (QoS) routing for traffic requests with various priorities; 2) blocking fairness for traffic requests with various bandwidth granularities; 3) adaptive routing according to the policy parameters from service provider; 4) lower computational complexity. Simulation results show that DWFA performs better than traditional overlay routing schemes such as optical-first-routing (OFR) and electrical-first-routing (EFR), in terms of traffic blocking ratio, traffic blocking fairness, average traffic logical hop counts, and global network resource utilization. It has been proved that the DWFA is a simple, comprehensive, and practical scheme of integrated routing in optical Internet for service providers.

• Convergence Security Journal
• /
• v.2 no.2
• /
• pp.89-97
• /
• 2002

We use the call routing to interpret the number or name for routing address in multimedia internet. The routing address is used for connection setup. The traffic engineering consists of traffic management, capacity management and network planning. In this paper, in the traffic management function, the basic functions for call routing and connection/bearer-path routing will be presented.

• Journal of the Korea Safety Management & Science
• /
• v.10 no.1
• /
• pp.155-166
• /
• 2008

During last two decades the transportation system has developed into very intelligent system with GIS, GPS and ITS. The practical transportation management system provides real time response module to manage the customer's order. We have surveyed research papers on the real time vehicle routing problem in last two decades to figure out the dynamic vehicle routing problem. The papers are classified by basic routing algorithms and by managing the dynamic events which are the order management, the routing re-optimization, the routing post-optimization and the waiting strategy.

• ETRI Journal
• /
• v.35 no.3
• /
• pp.406-413
• /
• 2013

In this paper, an orthogonal frequency division multiple access (OFDMA)-based minimum end-to-end delay (MED) distributed routing scheme for mobile backhaul wireless mesh networks is proposed. The proposed scheme selects routing paths based on OFDMA subcarrier synchronization control, subcarrier availability, and delay. In the proposed scheme, OFDMA is used to transmit frames between mesh routers using type-I hybrid automatic repeat request over multipath Rayleigh fading channels. Compared with other distributed routing algorithms, such as most forward within radius R, farthest neighbor routing, nearest neighbor routing, and nearest with forwarding progress, simulation results show that the proposed MED routing can reduce end-to-end delay and support highly reliable routing using only local information of neighbor nodes.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2005.05a
• /
• pp.1117-1123
• /
• 2005

This paper deals with a new automated guided vehicle (AGV) control system for distributed control. Proposed AGV control system adapts the multi-agent technology. The system is composed of two types of controller: routing and order. The order controller is in charge of assignment of orders to AGVs. Through the bidding-based negotiation with routing controllers, the order controller assigns a new order to the proper AGV. The order controller announces order information to the routing controllers. Then the routing controllers generate a routing schedule for the order and make a bid according to the routing schedule. If the routing schedule conflicts with other AGV's one, the routing controller makes an alternative through negotiation with other routing controllers. The order controller finally evaluates bids and selects one. Each controller consists of a set of agents: negotiation agent, decision making agent and communication agent. We focus on the agent architecture and negotiation-based AGV scheduling algorithm. Proposed system is validated through an exemplary scenario.

• Journal of Korea Multimedia Society
• /
• v.10 no.12
• /
• pp.1733-1740
• /
• 2007

In this paper, we propose a wireless location-based routing algorithm which uses the location information of its neighbor nodes and a destination node. At first, the proposed routing algorithm forwards a packet to the X direction by selecting a closest node to its destination as a next hop in terms of the X coordinate until the packet reaches closely to the packet's destination. Then the packet is forwarded to the Y direction by selecting a closest node to its destination in terms of the Y coordinate. We use a back off mechanism in case that a next hop cannot be found using the proposed routing algorithm, which resolves loops while forwarding. The experimental results show that the proposed routing algorithm performs well like the existing routing algorithms Ad hoc On-demand Distance Vector and Greedy Perimeter Stateless Routing. It is expected to use the proposed routing algorithm in the digital battlefield of military environments and survival games of commercial environments.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.289-291
• /
• 2005

Even though a lot of routing algorithms have been proposed, an omnipotent algorithm of routing technique, which has optimal efficiency, does not exist. Therefore, A routing algorithm in a sensor network is an application oriented; the best effective routing algorithm depends on which application it is used to. In this paper, the routing algorithm is proposed for the purpose of monitoring a movement of Assets in office. This Paper proposes a new multi-hop routing algorithm, that is, RSS(Received Signal Strength) value which was used in a localization of sensor network is applied to routing algorithm.

• International journal of advanced smart convergence
• /
• v.7 no.2
• /
• pp.22-32
• /
• 2018

In VANET, frequent movement of nodes causes dynamic changes of the network topology. Therefore the routing protocol, which is stable to effectively respond the changes of the network topology, is required. Moreover, the existing cluster-based routing protocol, that is the hybrid approach, has routing delay due to the frequent re-electing of the cluster header. In addition, the routing table of CBRP has only one hop distant neighbor nodes. PCBRP (Paired CBRP), proposed in this paper, ties two clusters in one pair of clusters to make longer radius. Then the pair of the cluster headers manages and operates corresponding member nodes. In the current CBRP, when the cluster header leaves the cluster the delay, due to the re-electing a header, should be occurred. However, in PCBRP, another cluster header of the paired cluster takes the role instead of the left cluster header. This means that this method reduces the routing delay. Concurrently, PCBRP reduces the delay when routing nodes in the paired cluster internally. Therefore PCBRP shows improved total delay of the network and improved performance due to the reduced routing overhead.