• 제어로봇시스템학회:학술대회논문집
• /
• 1998.10a
• /
• pp.308-311
• /
• 1998

Some nondestructive diagnostic methods including various types of corrosion sensors have been investigated. Under these conditions, a new structure of sensor that has a pair of electrode and magneto-supply was proposed. In order to detect the edge of the iron rust part, three-poles touch-type corrosion sensor is now proposed. The iron rust pattern where the sensor touches is estimated by means of the impedance of the sensor, and the edge of the iron rust is recognized by comparing the three measured impedances. As the result, our proposed sensor is useful to detect the initial state of iron rust.

• Journal of Ginseng Research
• /
• v.21 no.2
• /
• pp.69-77
• /
• 1997

In order to explain the connection between ginseng rust spot and soil ecological conditions, the bed soils and ginseng roots were sampled at different microrelief units and the reducing substances of the bed soils and iron forms of the ginseng root epi dermises were determined. The results showed that the occurrence of the rust spot was connected with the ecological conditions of the soils and the metabolism of the plant which was caused by the excessive $Fe^{2+}$ in the soil solution. Ginseng rust spot was the enrichment of iron which was mainly composed of organic complex irons. Including active ferrous active ferric and non active ferric forms and they were transformed into each other following the change of soil moisture and temperature regimes. According to the regularity of growth and decline of reducing substances in soil and rust index of ginseng roots as well as the difference of adaptability to excessive $Fe^{2+}$ in soil among different year-old seeding, a new comprehensive measure based on the connection of ameliorating soil and improving cultivation system was recommended to prevent the occurrence of ginseng rust spot.

• Corrosion Science and Technology
• /
• v.2 no.1
• /
• pp.26-29
• /
• 2003

This study determined that the four corrosive characters of carbon steel in the marine splash zone (MSZ) in China's four sea areas. It has a range and a corrosion peak value. The rust in the MSZ plays the role of "depolarizer" in the cathodic process of corrosion. The growth law of the rust layer in MSZ has a character of "annual ring". In addition the reasons causing serious corrosion of carbon steel in the marine splash zone has been discussed in this paper.

• Journal of the Korean Society of Safety
• /
• v.19 no.2
• /
• pp.41-46
• /
• 2004

The formation of rust on metallic substrate is known to cause the damages and destructions of raw materials, which is one of the leading reasons of sturctural collapses and many kind of hazards in modern industry. Polymer gels with rust removing effects were compounded in this study by employing various kinds of acids like hydrochloric acid, phosphoric acid, gluconic acid, oxalic acid as the rust removing ingredients. TEA(Triethanolamine) as dispersant and hydrophilic chemical were used for effective gelation of acids. Also corrosion inhibitor was added to enable the coating effect and to improve rust removing effect on metallic surface. In order to investigate the rust properites on metallic substrate, artificial rusts were prepared in salt solution, using iron, copper, aluminium and brass as the base metals. The properties of gel compounds were checked by gelation, pH, viscosity, morphology property and rust removing test. Developed gel compounds in this study have a good rust removing property, showing a strong adhesion on horizontal and vertical metallic surface, and can be easily rinsed off by water.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.52 no.4
• /
• pp.179-184
• /
• 2003

The pulsed power system is widely used for many industries and environments. Generally, we call the "RUST", the reddish brown surface, that was made on iron surface or some other metals, when they are contacted by water and air the main substance of rust is oxide-ionization. In other words, the chemical symbol of rust on iron surface is iron oxide(III) hydrate Fe203.nH2O. In this study, we have designed and fabricated our system which has a compact pulse generator with switching MOSFET. Also we have studied the metal-oxide removing characteristics using in the atmospheric arc discharge. It has been investigated their removing characteristics by the change of charging voltage and pulse repetition rates. From this result, we can find out that the removal area Is increased from 3.80 to 8.04[$\textrm{cm}^2$], when pulse duration is increased from 100[pps] to 400[pps]. 400[pps].

• Corrosion Science and Technology
• /
• v.6 no.3
• /
• pp.128-132
• /
• 2007

For a quantitative inspection on the performance of weathering steel bridges, we have investigated the relationship between the corrosion rate and the composition of the rust layers formed on weathering steel bridges located in various environments in Japan and applied a protective ability index (PAI) to the bridges. The corrosion rates were clearly classified by the PAI, ${\alpha}/{\gamma}*$ and sub index of $({\beta}+s)/{\gamma}*$, where $\alpha$, \gamma*, $\beta$ and s are the mass ratio of crystalline $\alpha-FeOOH$, the total of $\gamma$-FeOOH+ $\beta$-FeOOH + the spinel-type iron oxide (mainly $Fe_3O_4$), $\beta-FeOOH$ and spinel-type iron oxide, analyzed by powder X-ray diffraction, respectively. In the case of ${\alpha}/{\gamma}$*>1, the rust layer works protective enough to reduce the corrosion rate less than 0.01 mm/y. The sub index $({\beta}+s)/{\gamma}*$<0.5 or >0.5 classifies the corrosion rate of the non-protective rust layers, therefore the former state of the rust layer terms inactive and the latter terms active. The quantitative inspection of a weathering steel bridge requires a performance-inspection (PI) and periodical deteriorationinspections (DI). The PI can be completed by checking of the PAI, ${\alpha}/{\gamma}*$. The DI on the weathering steel bridges where deicing salt is sprinkled can be performed by checking the PAI, $({\beta}+s)/{\gamma}*$.

• Clean Technology
• /
• v.13 no.2
• /
• pp.127-133
• /
• 2007

Celite with enormous pore space inside can hold small molecules and can be well blended with polyethylene (PE) to make a Celite-PE film. Two types of Celite-PE film were prepared, one with Celite surface-treated with surfactant to reduce the hydrophilicity and another with plain Celite. The anti-rust chemical such as dicyclohexylamine, dicyclohexylamine nitrite, or diisopropylamine was allowed to permeate into celite pore in the film, and slowly evaporated to protect the packaged steel material from the rust for a long period of time. The chemical concentration in the different packaging film bags was analyzed by a gas chromatography for a month, and the anti-rust effect on iron labware was compared for a six month period. The Celite film was superior to PE film in anti-rust effect and the long-term anti-rust chemical evaporation.

• Membrane and Water Treatment
• /
• v.11 no.3
• /
• pp.207-215
• /
• 2020

Vivianite (Fe₃²⁺(PO₄)2·8H₂O) and green rust ([Fe₄²⁺Fe₂³⁺(OH)^-₁₂][SO₄^2-·2H₂O]^2-), ferrous containing minerals, could remove aqueous U(VI) in 5 min. and the efficiencies of green rust were roughly 2 times higher than that of vivianite. The zeta potential measurement results implies that the better performance of green rust might be attributed to the favorable surface charge toward uranyl phosphate species. The removal behaviors of the minerals were well fitted by pseudo-second order kinetic model (R² > 0.990) indicating the dominant removal process was chemical adsorption. Effects of Ca²⁺ and CO₃^2- at pH 7 were examined in terms of removal kinetic and capacity. The kinetic constants of aqueous U(VI) were 8 and 13 times lower (0.492 × 10^-3 g/(mg·min); 0.305 × 10^-3 g/(mg·min)) compared to the value in the absence of the ions. The thermodynamic equilibrium calculation showed that the stable uranyl species (uranyl tri-carbonate) were newly formed at the condition. Surface investigation on the reacted mineral with uranyl phosphates species were carried out by XPS. Ferrous iron and U(VI) on the green rust surface were completely oxidized and reduced into Fe(III) and U(IV) after 7 d. It suggests that the ferrous minerals can retard U(VI) migration in phosphate-rich groundwater through the adsorption and subsequent reduction processes.

• 한국문화재보존과학회:학술대회논문집
• /
• 2007.05a
• /
• pp.89-91
• /
• 2007

• Journal of the Korean Applied Science and Technology
• /
• v.38 no.1
• /
• pp.19-28
• /
• 2021

Corrosion is the degradation of metals by reaction with the environment. It is difficult to completely remove. Corrosion proceeds rapidly after the protective barrier is destroyed, and several reactions occur that alter the composition and properties of the metal surface and local environments, such as diffusion of metal cations into the matrix, the formation of oxides, and local pH changes. The study of corrosion of steel and iron is of theoretical and practical interest and is receiving considerable attention. Acid solutions, which are widely used in industrial pickling, acid descaling, cleaning and acidification of oil wells, require the use of corrosion inhibitors to suppress corrosion attacks on metallic materials. Physical removal of rust requires expensive special equipment, and chemical removal of it can cause corrosion or shorten the life of the metal. In this study, an eco-friendly rust cleaner was developed using cosmetics and food materials by applying the concept of perm reducing agent and chelate, and applied to remove rust from industrial and hot water pipes and various industrial devices. As a result, it was found that rust cleaners remove rust more effectively and safely compared to conventional treatment methods. At the same time, the rust removal efficiency was 1.75 to 2.5 times better for industrial piping and 1.56 to 2.2 times better for boiler hot water than conventional methods.