• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1998년도 제13차 학술회의논문집
• /
• pp.308-311
• /
• 1998

Some nondestructive diagnostic methods including various types of corrosion sensors have been investigated. Under these conditions, a new structure of sensor that has a pair of electrode and magneto-supply was proposed. In order to detect the edge of the iron rust part, three-poles touch-type corrosion sensor is now proposed. The iron rust pattern where the sensor touches is estimated by means of the impedance of the sensor, and the edge of the iron rust is recognized by comparing the three measured impedances. As the result, our proposed sensor is useful to detect the initial state of iron rust.

• Journal of Ginseng Research
• /
• 제21권2호
• /
• pp.69-77
• /
• 1997

In order to explain the connection between ginseng rust spot and soil ecological conditions, the bed soils and ginseng roots were sampled at different microrelief units and the reducing substances of the bed soils and iron forms of the ginseng root epi dermises were determined. The results showed that the occurrence of the rust spot was connected with the ecological conditions of the soils and the metabolism of the plant which was caused by the excessive $Fe^{2+}$ in the soil solution. Ginseng rust spot was the enrichment of iron which was mainly composed of organic complex irons. Including active ferrous active ferric and non active ferric forms and they were transformed into each other following the change of soil moisture and temperature regimes. According to the regularity of growth and decline of reducing substances in soil and rust index of ginseng roots as well as the difference of adaptability to excessive $Fe^{2+}$ in soil among different year-old seeding, a new comprehensive measure based on the connection of ameliorating soil and improving cultivation system was recommended to prevent the occurrence of ginseng rust spot.

• Corrosion Science and Technology
• /
• 제2권1호
• /
• pp.26-29
• /
• 2003

This study determined that the four corrosive characters of carbon steel in the marine splash zone (MSZ) in China's four sea areas. It has a range and a corrosion peak value. The rust in the MSZ plays the role of "depolarizer" in the cathodic process of corrosion. The growth law of the rust layer in MSZ has a character of "annual ring". In addition the reasons causing serious corrosion of carbon steel in the marine splash zone has been discussed in this paper.

• 한국안전학회지
• /
• 제19권2호
• /
• pp.41-46
• /
• 2004

The formation of rust on metallic substrate is known to cause the damages and destructions of raw materials, which is one of the leading reasons of sturctural collapses and many kind of hazards in modern industry. Polymer gels with rust removing effects were compounded in this study by employing various kinds of acids like hydrochloric acid, phosphoric acid, gluconic acid, oxalic acid as the rust removing ingredients. TEA(Triethanolamine) as dispersant and hydrophilic chemical were used for effective gelation of acids. Also corrosion inhibitor was added to enable the coating effect and to improve rust removing effect on metallic surface. In order to investigate the rust properites on metallic substrate, artificial rusts were prepared in salt solution, using iron, copper, aluminium and brass as the base metals. The properties of gel compounds were checked by gelation, pH, viscosity, morphology property and rust removing test. Developed gel compounds in this study have a good rust removing property, showing a strong adhesion on horizontal and vertical metallic surface, and can be easily rinsed off by water.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제52권4호
• /
• pp.179-184
• /
• 2003

The pulsed power system is widely used for many industries and environments. Generally, we call the "RUST", the reddish brown surface, that was made on iron surface or some other metals, when they are contacted by water and air the main substance of rust is oxide-ionization. In other words, the chemical symbol of rust on iron surface is iron oxide(III) hydrate Fe203.nH2O. In this study, we have designed and fabricated our system which has a compact pulse generator with switching MOSFET. Also we have studied the metal-oxide removing characteristics using in the atmospheric arc discharge. It has been investigated their removing characteristics by the change of charging voltage and pulse repetition rates. From this result, we can find out that the removal area Is increased from 3.80 to 8.04[$\textrm{cm}^2$], when pulse duration is increased from 100[pps] to 400[pps]. 400[pps].

• Corrosion Science and Technology
• /
• 제6권3호
• /
• pp.128-132
• /
• 2007

For a quantitative inspection on the performance of weathering steel bridges, we have investigated the relationship between the corrosion rate and the composition of the rust layers formed on weathering steel bridges located in various environments in Japan and applied a protective ability index (PAI) to the bridges. The corrosion rates were clearly classified by the PAI, ${\alpha}/{\gamma}*$ and sub index of $({\beta}+s)/{\gamma}*$, where $\alpha$, \gamma*, $\beta$ and s are the mass ratio of crystalline $\alpha-FeOOH$, the total of $\gamma$-FeOOH+ $\beta$-FeOOH + the spinel-type iron oxide (mainly $Fe_3O_4$), $\beta-FeOOH$ and spinel-type iron oxide, analyzed by powder X-ray diffraction, respectively. In the case of ${\alpha}/{\gamma}$*>1, the rust layer works protective enough to reduce the corrosion rate less than 0.01 mm/y. The sub index $({\beta}+s)/{\gamma}*$<0.5 or >0.5 classifies the corrosion rate of the non-protective rust layers, therefore the former state of the rust layer terms inactive and the latter terms active. The quantitative inspection of a weathering steel bridge requires a performance-inspection (PI) and periodical deteriorationinspections (DI). The PI can be completed by checking of the PAI, ${\alpha}/{\gamma}*$. The DI on the weathering steel bridges where deicing salt is sprinkled can be performed by checking the PAI, $({\beta}+s)/{\gamma}*$.

• 청정기술
• /
• 제13권2호
• /
• pp.127-133
• /
• 2007

세라이트는 내부 공동이 매우 넓어서 그 내부에 다양한 분자성 물질을 저장할 수 있으며, 세라이트 분말은 PE 필름 내부에 잘 분산될 수 있어서 세라이트를 함유한 PE 필름을 제조할 수 있었다. 표면을 계면활성제로 처리하여 극성을 낮춘 세라이트를 함유한 PE 필름 그리고 표면 처리하지 않은 세라이트를 이용한 PE 필름 등 2 가지 필름을 제조하였다. 제조된 필름내부의 세라이트 내부 공동에는 방청물질인 dicyclohexylamine, dicyclohexylamine nitrite 또는 diisopropylamine 등이 스며들게 하여, 포함된 방청분자들이 서서히 외부로 방출되게 함으로서 필름 백 내부에 포장된 철물에 대한 방청효과를 지속적으로 발휘하도록 하였다. 여러가지 밀봉필름 백 내부의 방청물질 농도 변화를 gas chromatography를 이용하여 한 달간 각 필름 백의 방청물질 발산 지속기간을 비교하였고, 실제로 실험실에서 사용되는 철물을 대상으로 6 개월에 걸쳐 방청실험을 진행하였다. 실험 결과 세라이트 필름은 일반 PE 필름에 비해 방청효과가 뛰어나며, 방청물질 발산 지속기간이 우수하였다.

• Membrane and Water Treatment
• /
• 제11권3호
• /
• pp.207-215
• /
• 2020

Vivianite (Fe₃²⁺(PO₄)2·8H₂O) and green rust ([Fe₄²⁺Fe₂³⁺(OH)^-₁₂][SO₄^2-·2H₂O]^2-), ferrous containing minerals, could remove aqueous U(VI) in 5 min. and the efficiencies of green rust were roughly 2 times higher than that of vivianite. The zeta potential measurement results implies that the better performance of green rust might be attributed to the favorable surface charge toward uranyl phosphate species. The removal behaviors of the minerals were well fitted by pseudo-second order kinetic model (R² > 0.990) indicating the dominant removal process was chemical adsorption. Effects of Ca²⁺ and CO₃^2- at pH 7 were examined in terms of removal kinetic and capacity. The kinetic constants of aqueous U(VI) were 8 and 13 times lower (0.492 × 10^-3 g/(mg·min); 0.305 × 10^-3 g/(mg·min)) compared to the value in the absence of the ions. The thermodynamic equilibrium calculation showed that the stable uranyl species (uranyl tri-carbonate) were newly formed at the condition. Surface investigation on the reacted mineral with uranyl phosphates species were carried out by XPS. Ferrous iron and U(VI) on the green rust surface were completely oxidized and reduced into Fe(III) and U(IV) after 7 d. It suggests that the ferrous minerals can retard U(VI) migration in phosphate-rich groundwater through the adsorption and subsequent reduction processes.

• 한국문화재보존과학회:학술대회논문집
• /
• 한국문화재보존과학회 2007년도 제25회 학술대회발표 논문집
• /
• pp.89-91
• /
• 2007

• 한국응용과학기술학회지
• /
• 제38권1호
• /
• pp.19-28
• /
• 2021

부식은 환경과의 반응에 의한 금속의 열화이다. 이는 완전히 제거하기가 어렵다. 부식은 보호장벽이 파괴 된 후 빠르게 진행되며 매트릭스로의 금속 양이온 확산, 산화물 형성과 국소 pH 변화 같은 금속 표면과 국소 환경의 조성과 특성을 변경하는 여러 반응이 일어난다. 강과 철의 부식에 대한 연구는 이론적, 실제적 관심사이며 상당한 관심을 받고 있다. 산업용 산세척, 산 스케일 제거, 세척 및 유정 산성화에 널리 사용되는 산 용액은 금속 재료에 대한 부식 공격을 억제하기 위해 부식 억제제를 사용해야한다. 녹을 물리적으로 제거하려면 고가의 특수 장비가 필요하며 이를 화학적으로 제거하면 부식을 유발하거나 금속의 수명을 단축 할 수 있다. 본 연구에서는 퍼머 환원제와 킬레이트 개념을 적용하여 화장품 및 식품소재를 이용한 친환경 녹 세정제를 개발하였고 산업 및 온수 관, 각종 산업 기기의 녹을 제거하기 위해 적용하여 보았다. 그 결과, 녹 세정제는 기존 처리 방식에 비해 녹을 더 효과적이고 안전하게 제거하는 것으로 나타났다. 동일한 시간에서 녹 제거 효율은 기존의 방법보다 공업용 배관의 경우 1.75 ~ 2.5 배, 보일러 온수용 배관의 경우 1.56 ~ 2.2 배 우수하였다.