• KIPS Transactions on Computer and Communication Systems
• /
• v.2 no.8
• /
• pp.335-342
• /
• 2013

Nowadays, the traffic type and behavior are extremely diverse due to the growth of network speed and the appearance of various services on Internet. For efficient network operation and management, the importance of application-level traffic identification is more and more increasing in the area of traffic analysis. In recent years traffic identification methodology using statistical features of traffic flow has been broadly studied. However, there are several problems to be considered in the identification methodology base on statistical features of flow to improve the analysis accuracy. In this paper, we recognize these problems by analyzing the ground-truth traffic and propose the solution of these problems. The four problems considered in this paper are the distance measurement of features, the selection of the representative value of features, the abnormal behavior of TCP sessions, and the weight assignment to the feature. The proposed solutions were verified by showing the performance improvement through experiments in campus network.

• Resources Recycling
• /
• v.19 no.6
• /
• pp.86-92
• /
• 2010

In the many kind of construct-material, the concrete which has the high-strength and a durability is sufficient to use with structure-material. but the color of concrete is very monotony, so generally concrete isn't used the out surface. although color concrete is a method of expressing surface, the combination of pigment and cement cause many physical problem such as efflorescence phenomenon, strength degradation and so on. In this study, It attempt to develop the black mortar using the industrial granulated blast furnace slag and to evaluate basic physical properties compare with general color concrete to solve the color concrete problem. The result of experiment showed that the flow dropped mixing of pigment. but flow increased in proportion to the mixing rate in occasion of mortar that mix granulated blast furnace sla and black mortar which was made granulated blast furnace slag has more visible black color than any mortar.

• The KIPS Transactions:PartC
• /
• v.18C no.4
• /
• pp.243-250
• /
• 2011

Nowadays, the traffic type and behavior are extremely diverse due to the appearance of various services on Internet, which makes the need of traffic identification important for efficient operation and management of network. In recent years traffic identification methodology using statistical features of flow has been broadly studied. We also proposed a traffic identification methodology using payload size distribution in our previous work, which has a problem of low completeness. In this paper, we improved the completeness by solving the PSD conflict using IP and port. And we improved the accuracy by changing the distance measurement between flow and statistic signature from vector distance to per-packet distance. The feasibility of our methodology was proved via experimental evaluation on our campus network.

• Korean Journal of Remote Sensing
• /
• v.21 no.6
• /
• pp.469-482
• /
• 2005

China Coastal Waters (CCW) usually appears in the seas surrounding Jeju Island annually(June to October) and is very pronounced in August. Generally, low-salinity water appears to the western seas of Jeju Island from June through October and gradually propagates to the eastern seas, where CCW meets the Tsushima Current. Empirical orthogonal function (EOF) analysis of SLAs and SSTs indicated that the variance in SLAs and SSTs was $95.01\%$(the first mode to third mode) and $98.09\%$(the first mode), respectively. The PSD of the western waters for the first mode of EOF analysis of SLAs was stronger than that of the eastern waters because of the influence of CCW. The PSD for the EOF analysis of SSTs was similar in all areas (the Yangtze Estuary and the seas to the west and east of Jeju Island), with a period of approximately 260 days.

• Proceedings of the Korea Society for Simulation Conference
• /
• 1992.10a
• /
• pp.3-3
• /
• 1992

컴퓨터 시스템의 개발 및 분석에 많이 활용되는 시뮬레이션 모델을 구축하는데 있어서 SIMSCRIT, GISS, SIMAN, SLA II등과 같은 시뮬레이션 전용언어가 많이 사용되지만, 이들은 새로운 전용언어의 습득, 시스템 프로그램과의 접속, 시뮬레이션 수행 속도면에서 부담을 주어왔다. 본 연구에서는 기존의 C언어 사용자들이 손쉽게 시뮬레이션 모델을 구축할 수 있도록 기존의 smpl을 확장하여 SMPLE(smpl extended)를 개발하였다. SMPLE의 모체의 smpl은 컴퓨터 시스템의 시뮬레이션 모델을 구현하기 위해 MIT에서 C언어를 이용하여 고안되었으며, C언어의 기능적인 확장으로서 라이브러리 함수들의 집합 형태를 갖는 시뮬레이션 서브 시스템이다. 이러한 라이브러리 함수들의 집합인 smpl 시뮬레이션 서브 시스템은 C언어 자체와 더불어 사건중심(event-oriented) 시뮬레이션 언어를 구성하며, smpl 시뮬레이터는 C 언어 프로그램으로 구현되다. smpl은 시뮬레이션하기 위한 설비(facility)들을 정의, 예약, 해제하거나 상태를 알아보는 함수를 제공하며, 시간의 관점에서 보면 토큰의 흐름은 일련의 대기시간과 활동시간에 의하여 나타낼 수 있게 된다. smpl은 사건의 스케쥴링(scheduling), 확률변수의 생성, 통계자료 수집 등에 관한 함수의 제공과, 시뮬레이션 시간의 전진과 사건발생의 순서를 조절해주는 기능을 제공한다. smpl 시뮬레이션 프로그램은 초기화루틴, 제어루틴 및 결과출력루틴으로 구성된다. 기존의 smpl에서 사용되는 프로그램의 자료구조(data structure)는 배열과 인덱스 구조가 사용되었다. 이러한 구조는 이미 완성되어 있는 프로그램 내에서는 효율성 면에서 좋겠지만, 변경이나 확장하기 위해 이 프로그램을 분석한다거나 필요한 기능을 추가하기 위해서는 매우 많은 어려움이 따르게 된다. 본 논문에서는 배열을 기반으로 하고 있는 smpl의 자료구조를 C의 structure와 pointer를 기반으로 하게끔 변경시키고 이에 따르는 제반 변경 사항을 수정 보완하여 프로그램의 분석을 용이하게 하며 기능의 변경 및 추가가 수월하게 하였고 메모리를 동적으로 관리할 수 있게 하였다. 또한 기존의 smpl에 디버깅용 함수 및 설비(facility) 제어용 함수를 추가하여 시뮬레이션 프로그램 작성을 용이하게 하였다. 예를 들면 who_server(), who_queue(), pop_Q(), push_Q(), pop_server(), push_server(), we(), wf(), printfct() 같은 함수들이다. 또한 동시에 발생되는 사건들의 순서를 조종하기 위해, 동시에 발생할 수 있는 각각의 사건에 우선순위를 두어 이 우선 순위에 의하여 사건 리스트(event list)에서 자동적으로 사건들의 순서가 결정되도록 확장하였으며, 설비 제어방식에 있어서도 FIFO, LIFO, 우선 순위 방식등을 선택할 수 있도록 확장하였다. SIMPLE는 자료구조 및 프로그램이 공개되어 있으므로 프로그래머가 원하는 기능을 쉽게 추가할 수 있는 장점도 있다. 아울러 SMPLE에서 새로이 추가된 자료구조와 함수 및 설비제어 방식등을 활용하여 실제 중형급 시스템에 대한 시뮬레이션 구현과 시스템 분석의 예를 보인다.

• Fashion & Textile Research Journal
• /
• v.21 no.3
• /
• pp.267-276
• /
• 2019

This study develops 3D-printed-garment collections for a fashion show presentation. A design concept using traditional patterns that consisted of garments regarding the limitation of the printing technology was investigated in order to develop the collection. The structures of the connecting joints of the textile parts which could be easily and sturdily interconnected were invented. Wearability as garments that could be naturally worn on the human body were sought. As a result, four 3D-printed-garments were developed. The 1st garment composed of objects based on a 'Yeon-Dang-Cho'-pattern was constructed as a geometric robe style using a FDM 3D printer and transparent TPU filaments. The 2nd and 3rd 3D-printed-garments composed of an object based on a 'Boe-Sang-Hwa'-pattern was constructed as a distorted one-piece exaggerating the silhouettes of shoulders and waist parts as well as a straight asymmetric tunic style that used the same printer and material as the 1st garment. The last garment composed of an object based on a 'Boe-Sang-Hwa'-pattern printed using a SLA 3D printer and flexible-liquid-resin was constructed attaching the objects on the fabric material by the hot-press machine. The four developed garments were presented in the opening fashion show of 'the 6th International 3D-printing Korea Expo'. This study provides a basic case for related studies to adapt 3D-printing technology in textile pattern development of garment construction.

• Korean Journal of Veterinary Service
• /
• v.42 no.2
• /
• pp.73-83
• /
• 2019

Foot-and-Mouth Disease (FMD) is a highly contagious trans-boundary viral disease caused by FMD virus, which causes huge economic losses. FMDV infects cloven hoofed (two-toed) mammals such as cattle, sheep, goats, pigs and various wildlife species. To control the FMDV, it is necessary to understand the life cycle and the pathogenesis of FMDV in host. Especially, the protein-protein interaction between FMDV and host will help to understand the survival cycle of viruses in host cell and establish new therapeutic strategies. However, the computational approach for protein-protein interaction between FMDV and pig hosts have not been applied to studies of the onset mechanism of FMDV. In the present work, we have performed the prediction of the pig's proteins which interact with FMDV based on RNA-Seq data, protein sequence, and structure information. After identifying the virus-host interaction, we looked for meaningful pathways and anticipated changes in the host caused by infection with FMDV. A total of 78 proteins of pig were predicted as interacting with FMDV. The 156 interactions include 94 interactions predicted by sequence-based method and the 62 interactions predicted by structure-based method using domain information. The protein interaction network contained integrin as well as STYK1, VTCN1, IDO1, CDH3, SLA-DQB1, FER, and FGFR2 which were related to the up-regulation of inflammation and the down-regulation of cell adhesion and host defense systems such as macrophage and leukocytes. These results provide clues to the knowledge and mechanism of how FMDV affects the host cell.

• Korean Journal of Materials Research
• /
• v.29 no.4
• /
• pp.221-227
• /
• 2019

This study examines the role of the nano- and micro-particle ratio in dispersion stability and mechanical properties of composite resins for SLA(stereolithography) 3D printing technology. VTES(vinyltriethoxysilane)-coated $ZrO_2$ ceramic particles with different nano- and micro-particle ratios are prepared by a hydrolysis and condensation reaction and then dispersed in commercial photopolymer (High-temp) based on interpenetrating networks(IPNs). The coating characteristics of VTES-coated $ZrO_2$ particles are observed by FE-TEM and FT-IR. The rheological properties of VTES-coated $ZrO_2/High-temp$ composite solution with different particle ratios are investigated by rheometer, and the dispersion properties of the composite solution are confirmed by relaxation NMR and Turbiscan. The mechanical properties of 3D-printed objects are measured by a tensile test and nanoindenter. To investigate the aggregation and dispersion properties of VTES-coated $ZrO_2$ ceramic particles with different particle ratios, we observe the cross-sectional images of 3D printed objects using FE-SEM. The 3D printed objects of the composite solution with nano-particles of 80 % demonstrate improved mechanical characteristics.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.3
• /
• pp.66-73
• /
• 2019

Recently, FDM-type 3D printer technology has been developed, and efforts have been made to improve the output formability and characteristics further. Through this, 3D printers are used in various fields, and printer technologies are suggested according to usage, such as FDM, SLA, DLP, and SLM. In particular, the FDM method is the most widely used, and the FDM method technology is being developed further. The characteristics of the output are produced by the FDM-type 3D printer, which is determined by various factors, and particularly the perspective of the Inter-Layer Fill Factor, which is the volume ratio of the laminated material that exerts a direct influence. In this study, the Inter-Layer Fill Factor is theoretically obtained by presenting the internal space between each layer according to the laminate thickness as a cross-sectional shape model, and the cross section of the actual laminated sample is compared with the theoretical model through experiments. Then, the equation for the theoretical model is defined, and the strength change according to each condition (tensile strength of material, reduction slope, strength reduction rate, and output strength) is confirmed. In addition, we investigated the influence on the correlation and strength between laminate thickness and the Inter-Layer Fill Factor.

• Tribology and Lubricants
• /
• v.36 no.6
• /
• pp.365-370
• /
• 2020

Recently, additive manufacturing (AM) technology has been applied to various industries such as automotive, aviation, medical, and electronics. Most prior studies are limited to the mechanical properties of printed materials, and few studies are being conducted on their tribological characteristics. However, the friction and wear characteristics of the material should be studied in order to utilize the components manufactured using AM technology as mechanical parts. In this study, the friction and wear characteristics of acrylonitrile-butadiene-styrene (ABS)-like resin printed with stereo lithography apparatus (SLA) 3D printing are evaluated according to the viscosity of silicon oil lubricant using a ball-on-disk experiment. Lubricants with a viscosity of 500, 1000, and 2000 cSt are prepared for the experiment. If silicon oil lubricants are used during the ball-on-disk test, the coefficient of friction (COF) and wear rates are significantly reduced, and the higher the viscosity of the lubricant, the lower will be the COF and wear rates. It is also verified that the temperature of the specimen owing to friction also decreases according to the viscosity of the lubricant. This is because of the silicon oil film thickness, and the higher the viscosity of the lubricant, the thicker will be the oil film. More studies on the tribological characteristics of 3D printing materials and suitable lubricants will be required to use 3D printed parts as mechanical elements.