• 대한치과보철학회지
• /
• 제52권3호
• /
• pp.211-221
• /
• 2014

목적: 기존의 SLA 표면을 높은 친수성을 가지는 표면으로 개질하고자 NaOH에 침적하는 방법이 SLA 표면 형상 및 특성에 어떤 영향을 미치는지 알아보고, 골모유사세포의 증식, 부착 및 분화에 어떤 영향을 미치는지 알아보고자 계획되었다. 재료 및 방법: Machined surface (대조군), SLA surface (SLA 군), SLA에 NaOH 처리한 표면(SLA/NaOH 군)의 각 시편을 제조하고 친수성을 극대화한 SLA/NaOH 군의 표면 특성을 평가하기 위해 표면성분(XPS), 표면 거칠기, 표면 접촉각 등을 평가하였다. 그 이후 MG-63 세포 배양 후 이번 실험에서 만든 표면들이 세포독성을 가지는지를 평가하고, WST assay를 통하여 세포 증식, F-actin 염색을 통하여 세포의 부착형태를 관찰하였다. 이 후 ALP assay를 통하여 세포 분화를 평가하였다. 각 군간 통계측정을 위해 ANOVA 후 다중비교를 하였다(P<.05). 결과: SLA/NaOH 군의 접촉각은 $5.59{\pm}1.13$도였다. 모든 군들은 MG-63 세포에 대해 세포독성을 가지지 않았다. 세포 부착 평가에서 SLA/NaOH 군에서 가장 높은 부착 정도를 보였고(P<.05), Machined 군과 SLA 군에서도 표면 거칠기가 높은 SLA군에서 더 높은 세포 부착정도를 확인할 수 있었다(P<.05). 배양 7일까지 모든 군에서 MG-63 세포의 증식이 점차 증가하였다. 모든 군에서 3일과 7일에 세포의 증식에서 유의할 만한 차이가 보였고, SLA/NaOH 군에서 가장 높은 세포증식을 보였다. ALP 활성도는 7일에서는 세 군 사이에 차이가 없었다. 하지만 14일에는 SLA/NaOH 군이 유의성 있는 증대를 보였다(P<.05). 결론: 본 연구를 통하여 NaOH를 처리하는 수화방식을 통해 SLA 표면을 변형시킴으로서 세포의 부착, 증식 및 분화를 촉진시켜 임플란트의 골유착을 증진시킬 수 있는 가능성을 확인하였다.

• 대한치과보철학회지
• /
• 제44권4호
• /
• pp.443-454
• /
• 2006

Purpose: This study aims to get the fundamental data which is necessary to the development direction of implant surface treatment hereafter, based on the understanding the surface structure and properties of titanium which is suitable for the absorption of initial tissue fluid by researching effects of additional surface treatments fir sandblasted with large git and acid-etched(SLA) titanium on surface micro-roughness, static wettability, fibronectin adsorption Materials and Method: In the Control groups, the commercial pure titanium disks which is 10mm in diameter and 2mm in thickness were treated with HCI after sandblasting with 50$\mu$m $Al_2O_3$. The experiment groups were made an experiment each by being treated with 1) 22.5% nitric acid according to SLA+ASTM F86 protocol, 2) SLA+30% peroxide, 3) SLA+NaOH, 4) SLA+ Oxalic acid, and 5) SLA+600$^{\circ}C$ heating. In each group, the value of Ra and RMS which are the gauges of surface roughness was measured, surface wettability was measured by analyzing with Sessile drop method, and fibronectin adsorption was measured with immunological assay. The significance of each group was verified by (SPSS, ver.10.0 SPSS Inc.) Kruskal-Wallis Test. (α=0.05) And the correlation significance between Surface micro-roughness and surface wettability. surface roughness and fibronectin adsorption, and surface wettability and fibronectin adsorption was tested by Spearman's correlation analysis. Result: All measure groups showed the significant differences in surface micro-roughness, surface wettability, and fibronectin adsorption. (p<0.05) There was no significance in correlation among the surface micro-roughness, surface wettability, and fibronectin adsorption. (p>0.05) Conclusion: Surface micro-roughness and surface wettability rarely affected the absorption of initial tissue fluid on the surface of titanium.

• 대한치과교정학회지
• /
• 제38권5호
• /
• pp.328-336
• /
• 2008

본 연구에서는 교정 치료 시 골내 고정원으로 사용되는 교정용 임플랜트의 표면처리 여부가 골유착능에 있어서 어떠한 효과를 보이는지 제거회전력의 측정을 통해 알아보고자 하였으며, 그에 따른 교정력 적용의 확장과 임상적 의의를 알아보고자 하였다. 실험군은 분사처리 후 산부식(Sand-blasted Large grit, and Acid etched, SLA) 표면 처리된 교정용 미니 임플랜트인 C-implant (Cimplant, Seoul, Korea)를 사용하였으며 대조군은 같은 디자인이지만 표면 처리를 하지 않은 평활면 C-implant를 사용하였다. 실험군과 대조군을 각각 2개씩 11마리의 가토 경골에 식립하였고 식립 후 6주에 가토를 희생시켜 제거회전력을 측정하여 t-test를 통하여 두 군의 제거회전력 차이의 통계적 유의성을 알아보았으며 조직표본을 만들어 조직소견을 관찰하였다. 실험결과 제거회전력은 SLA 처리한 C-implant 군이 평활면 C-implant 군보다 통계적으로 유의성 있게 높은 결과를 보였다 (p < 0.05). 평활면 C-implant 군의 평균 제거회전력 값은 4.614 Ncm이고, SLA C-implant 군의 평균 제거회전력 값은 6.286 Ncm로, SLA 군이 평활면 군보다 73% 더 높은 제거회전력에 대한 저항성을 나타내었다. 이상의 연구 결과에서 SLA표면처리가 C-implant의 골유착능을 증가시켰음을 알 수 있었다. 따라서 표면 처리된 교정용 미니 임플랜트는 기존의 임플랜트에 비해 좀 더 강한 힘에 저항할 수 있으며 탈락률을 낮출 수 있을 것으로 생각된다.

• Journal of Periodontal and Implant Science
• /
• 제45권3호
• /
• pp.94-100
• /
• 2015

Purpose: The aim of this study was to investigate the combined effects of physical and chemical surface factors on in vivo bone responses by comparing chemically modified hydrophilic sandblasted, large-grit, acid-etched (modSLA) and anodically oxidized hydrophobic implant surfaces. Methods: Five modSLA implants and five anodized implants were inserted into the tibiae of five New Zealand white rabbits (one implant for each tibia). The characteristics of each surface were determined using field emission scanning electron microscopy, energy dispersive spectroscopy, and confocal laser scanning microscopy before the installation. The experimental animals were sacrificed after 1 week of healing and histologic slides were prepared from the implant-tibial bone blocks removed from the animals. Histomorphometric analyses were performed on the light microscopic images, and bone-to-implant contact (BIC) and bone area (BA) ratios were measured. Nonparametric comparison tests were applied to find any significant differences (P<0.05) between the modSLA and anodized surfaces. Results: The roughness of the anodized surface was $1.22{\pm}0.17{\mu}m$ in Sa, which was within the optimal range of $1.0-2.0{\mu}m$ for a bone response. The modSLA surface was significantly rougher at $2.53{\pm}0.07{\mu}m$ in Sa. However, the modSLA implant had significantly higher BIC than the anodized implant (P=0.02). Furthermore, BA ratios did not significantly differ between the two implants, although the anodized implant had a higher mean value of BA (P>0.05). Conclusions: Within the limitations of this study, the hydrophilicity of the modSLA surface may have a stronger effect on in vivo bone healing than optimal surface roughness and surface chemistry of the anodized surface.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제32권6호
• /
• pp.514-523
• /
• 2006

The purpose of the present study was to evaluate the effects of several implant surface treatments to the bone formation, by placing Machined implants, 75${\mu}m$ Calcium phosphate-blasted implants and $Al_2O_3$-blasted and acid-etched implants in rabbit tibia through histomorphometric study. Two animals of each group were sacrificed at 2, 4, 8 weeks. The specimens containing the implants were dehydrated and embedded into hard methylmethacrylate plastic. Thereafter, the sections were ground to 50${\mu}m$. The specimens were stained with Villanueva bone stain for a light microscopic study. The results were as follows; 1. When the surface roughness of three different implants was measured by Surfcorder, the Ra of the Machined group, the RBM group and the SLA group was 0.16${\mu}m$, 0.44${\mu}m$, and 1.08${\mu}m$. 2. When examining the surfaces of the implants in the scanning microscope, Machined implant has the smooth surface with a few scratches, RBM implant has the rough surface with curled ridges and valleys, and SLA implant has the rough surface structures such as sharp protruding parts and micropits measuring 1-2${\mu}m$ in diameter. 3. After 2 weeks of implantation, the percentage of bone-to-implant contact of the Machined group, the RBM group and the SLA group was 26.86%, 35.40% and 45.99%. However, its differences between each group decreased during the healing periods. 4. After 2 weeks of implantation, the percentage of bone area inside the threads of the Machined group, the RBM group and the SLA group were 21.55%, 30.43% and 41.18%. However, its difference of bone area between machined group and surface treatment groups was maintained but the difference within the surface treatment groups decreased during the healing periods. In summary, the amount of bone formation in RBM and SLA group was greater than Machined group in early healing stage. These results suggest that RBM and SLA implants can reduce the healing period for osseointegration and may be suitable for early function.

• 대한치과교정학회지
• /
• 제36권5호
• /
• pp.324-330
• /
• 2006

Sandblasted large grit, acid etched(SLA)표면처리 된 교정용 미니 임플랜트와 평활면을 가진 교정용 미니 임플랜트 사이에 제거회전력과 조직학적 소견을 통해 표면처리된 교정용 임플랜트의 임상적 가능성에 대하여 알아보고자 하였다. 실험재료로는 길이가 9.5 mm, 외경이 1.8 mm인 custom made, screw shaped, titanium implants가 사용되었다. 미니 임플랜트는 두개의 군으로 분류되었는데 SLA군은 20개의 SLA 표면처리된 미니 임플랜트이었고, 평활면군은 크기와 형태가 같지만 SLA처리공정이 생략되어 제작된 20개의 미니 임플랜트로 구성되었다. 이들은 10마리 가토의 경골에 식립되었다. 각각의 가토의 우측 경골에는 SLA군의 미니 임플랜트 2개가 식립되었고, 좌측 경골에는 평활면군의 미니 임플랜트 2개가 식립되었다. 각 군에는 식립 직후 Ni-Ti coil spring에 의해 약 150 g의 지속적인 견인력이 주어졌다. 식립 6주 후에 10마리의 가토를 희생하였고, 안정된 상태에서 Ni-Ti coil spring을 제거하였으며 digital torque gauge를 이용하여 제거 회전력을 측정하였다. 식립 6주 후에 SLA군의 경우 (8.29 Ncm) 평활면군 (3.34 Ncm)에 비해 더 높은 평균 제거회전력을 나타내었고 조직학적 소견에서도 screw 하방에서의 신생골 형성이 관찰되었다. SLA 표면처리된 미니 임플랜트는 평활면 미니 임플랜트에 비해 좀 더 강한 교정력에 저항할 수 있을 것으로 예상되었다.

• Journal of Periodontal and Implant Science
• /
• 제41권5호
• /
• pp.242-247
• /
• 2011

Purpose: The purpose of this study was to characterize the osseointegration of the fibronectin-coated implant surface. Methods: Sand-blasted, large-grit, acid-etched (SLA) surface implants, with or without a thin calcium phosphate and fibronectin coating, were placed in edentulous mandibles of dogs 8 weeks after extraction. All dogs were sacrificed forhistological and histomorphometric evaluation after 4- and 8-week healing periods. Results: All types of implants were clinically stable without any mobility. Although the bone-to-implant contact and bone density of the SLA implants coated with calcium phosphate (CaP)/fibronectin were lower than the uncoated SLA implants, there were no significant differences between the uncoated SLA surface group and the SLA surface coated with CaP/fibronectin group. Conclusions: Within the limits of this study, SLA surfaces coated with CaP/fibronectin were shown to have comparable bone-to-implant contact and bone density to uncoated SLA surfaces.

• Journal of Periodontal and Implant Science
• /
• 제37권2호
• /
• pp.251-263
• /
• 2007

The present study was performed to evaluate the effects of Tetracycline-HCI on the microstructure change of SLA implant surface according to application time. In the Tetracycline-HCI group, 6 implants were rubbed with sponges soaked $50mg/m{\ell}$ Tetracycline-HCI solution for O.5min., lmin., 1. 5min., 2min., 2.5min. and 3min. In the saline group. another 6 implants conditioned with sponges soaked saline using same methods. One implant wasn't conditioned anything. Then, the changes of surface roughness values were evaluated by optical interferometer & specimens were processed for scanning electron microscopic observation. The results of this study were as follows: 1. In both Tetracycline-HCI group & saline group, there are no significant differences between surface roughness values before & after surface detoxification. And in scanning electron microscopic observation. there are slightly changes of implant surface structures but this changes were not significant by comparison with no treatment implant surface. 2. In the changes of surface roughness values & the scanning electron microscopic observation, there were no significant differences between saline & Tetracycline-HCI groups. In conclusion, the detoxification with $50mg/m{\ell}$ Tetracycline-HCI within 3 minutes can be applied for treatment of peri-implantitis in SLA surface implants. without surface microstructure changes.

• Korean Chemical Engineering Research
• /
• 제62권1호
• /
• pp.105-111
• /
• 2024

SLA (Stereo Lithography Apparatus) 방식은 액체 상태의 광경화성 레진(Resin)이 자외선 레이저에 닿으면 고체가 되는 원리를 활용한 3D 프린팅 방식으로 다양한 분야에서의 활용도가 증가하고 있다. 본 연구에서는 이 SLA 3D 프린팅 출력물의 표면 특성 중 소수성과 투명도를 개선하여 미세 유체 시스템의 제작에 활용하기 위한 기초 연구를 수행하였다. SLA 출력물은 소수성 코팅 방법을 이용해 표면 소수성의 특성을 개선할 수 있었으나, 소수성 코팅 방법의 종류에 따라 다양한 환경에서의 코팅 유지력은 차이를 보였다. 또한, 미세 유체 시스템의 제작에 요구되는 충분한 투명도와 소수성의 특성을 함께 확보하기 위해 선행된 연구에서 제안한 투명도 확보 방법에 소수성 코팅을 적용하여 접촉각의 변화를 비교하였다. Teflon 코팅법이 이산화 티타늄 코팅법과 비교하여 우수한 투명도의 확보가 가능하며, 다양한 환경에 노출되었을 때 높은 코팅의 유지력을 가져 미세 유체 시스템의 제작에 활용되기에 적합한 소수성 코팅법으로 제안되었다. 마지막으로 본 연구를 통해 제안된 미세 유체 시스템의 제작에 적합한 소수성 코팅 방법인 Teflon 코팅법 중 Fluoropel 800을 이용하여 디지털 미세 유체 시스템 중 하나인 액적 접촉 충전 현상(Electrophoresis of Charged Droplet, ECD) 칩을 SLA 3D 프린팅으로 제작, 액적의 조작을 성공적으로 시연함으로써 SLA 3D 프린팅 기술의 미세 유체 시스템의 제작에 활용 가능성을 확인하였다.

• 대한치과보철학회지
• /
• 제44권5호
• /
• pp.606-616
• /
• 2006

Purpose: This experiment examined the effect of different surface treatment on the osseointegration and stability of implants. Material and methods: In this study, 40 each of machined, SLA and RBM implants, which are the most commonly used implants, were implanted into the tibia of 20 normal rabbits using $OsseoCare^{TM}$. The rabbits were sacrificed after 1 week, 4 weeks, 8 weeks and 12 weeks for implant stability analysis, removal torque analysis, histologic and histomorphometric analysis. Result : ISQ showed significant difference between Machined and RBM at first week and at 4 weeks. There was significant difference between Machined and both SLA and RBM(p<0.05) but after 8 weeks there were no significant difference between each group. In the removal torque, RBM showd significantly higher values than SLA and Machined surface at 1st week. At 4th and 12th week, there was significant difference between Machined and SLA, RBM(p<0.05). In the bone to implant contact variable, there was no significant difference between each surface treatment method. In the Machined surface group, there was no significant difference between each time interval. but in SLA group, there were significant differences between the 1st week and 12th week and in RBM group, there were significant differences between the 1st week and 8th, 12th week and between 4th and 12th week(p<0.05). The bone area showed significantly higher values in SLA and RBM compared to Machined surface 1st and 8th week and significantly higher values in SLA than Machined surface at the 4th week(p<0.05). Conclusion: The roughened surface of implants showed positive effect in the early stages of implantation and assisted in bone formation After the bone formation stage, there was no statistical difference between Machined and roughened surface groups. In dental implantation, where initial stability is critical to the success of implants, the use of roughened surface implants should assist in reducing the healing period after implantation.