• 대한방사선기술학회지:방사선기술과학
• /
• 제40권1호
• /
• pp.121-126
• /
• 2017

의료용 디지털 영상 및 통신 표준 영상과 3차원 프린팅을 이용한 보청기 이어 쉘 제작기술을 연구하였다. 이는 기존에 없는 새로운 적용방법이며 보청기 수요자의 안전, 감염, 제작시간, 진행 단계를 줄일 수 있는 적용기술이다. 연구는 의료용 디지털 영상 및 통신 표준 영상으로 스테레오리소그래피 파일을 만들기 위한 0.5 mm, 1.0 mm, 2.0 mm의 볼륨으로 획득한 값을 3차원 프린터로 출력 전과 후의 과정에서 형상표면에 미치는 영향을 실험하였다. 출력 전에는 스테레오리소그래피 파일구조에 대해 상대적 관계를 비교하였고, 출력 후에는 이어 쉘 형상표면의 적층구조 간격을 현미경으로 확대하여 비교하였다. 스테레오리소그래피 파일구조 분석에서 0.5 mm, 1.0 mm, 2.0 mm의 순으로 삼각형 꼭지점, 5개 이상의 교차점, 최대 교차점의 개수가 많았으며 외이도 형상 자체의 굴곡도에 따라 Bending, Angle, Crest 영역 순으로 삼각형 구조가 조밀하게 분포하였다. 디지털 현미경에 의한 이어 쉘 형상표면은 2.0 mm, 1.0 mm, 0.5 mm 순으로 적층구조 간격이 두껍게 나타났다. 이와 같이 스테레오리소그래피 표면구조는 3차원 이어 쉘 형상의 굴곡도가 불규칙하고 스테레오리소그래피 파일을 만들기 위한 의료용 디지털 영상 및 통신 표준 데이터의 볼륨 값이 작을수록 교차하는 스테레오리소그래피 삼각형 구조는 조밀함을 알 수 있었다.

• 한국작물학회지
• /
• 제64권3호
• /
• pp.246-268
• /
• 2019

Soybean [Glycine max (L.) Merr.] is a species of legume native to East Asia. The interactions between climatic conditions and genetic characteristics are known to affect the agricultural performance of soybean. Therefore, the present investigation was conducted to identify the main elements affecting the agricultural performances of 11 soybean varieties/lines from China [Harbin ($45^{\circ}12^{\prime}N$), Yanji ($42^{\circ}53^{\prime}N$), Dalian ($39^{\circ}30^{\prime}N$), Qingdao ($36^{\circ}26^{\prime}N$)] and the Republic of Korea [Suwon ($37^{\circ}16^{\prime}N$), and Jeonju ($35^{\circ}49^{\prime}N$)]. The days to flowering (DTF) of soybeans with the e1-nf and e1-as alleles and the E1e2e3e4 genotype, except in 'Keumgangkong', 'Tawonkong', and 'Duyoukong', were relatively short compared to those of soybeans with other alleles. Although DTF of the soybeans was highly correlated with all climatic conditions [negative: precipitation, average temperature (AVT), accumulated temperature; positive: day-length (DL)], days to maturity and 100-seed weight of the soybeans showed no significant correlation with any climatic conditions. The soybeans with a dominant Dt1 allele, except 'Tawonkong', had the longest stem length (STL). Moreover, STL of the soybeans grown in the test fields showed a positive correlation with only DL; however, the results of our chamber test that was conducted to complement the field tests showed that STL of soybean was positively affected by AVT and DL. Although soybean yield (YLD) showed positive correlations with latitude and DL (except L62-667, OT89-5, and OT89-6), the response of YLD to the climatic conditions was cultivar-specific. Our results show that DTF and STL of soybeans grown in six different latitudes are highly affected by DL, and AVT and genetic characteristic also affect DTF and STL.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회/대한산업공학회 1999년도 춘계공동학술대회:정보화시대의 지식경영
• /
• pp.549-550
• /
• 1999

• 전자공학회지
• /
• 제23권8호
• /
• pp.72-83
• /
• 1996

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.2256-2262
• /
• 2011

In this study, sound transmission loss (STL) is investigated on the multi-layered windows used in the KTX-sancheon and next generation HEMU-400x high speed train. Using TLOSS, which is developed as a special purpose STL analysis program, STLs of the multi-layered glass windows are analytically investigated and compared with the mass law result. Window specimens for the two train models are manufactured and intensity transmission losses are measured based on ASTM E2249-02. The problems in aspect of sound insulation are diagnosed on the two window models. The aim of this study is to provide useful data for the improvement of the interior noise in the high speed train.

• 한국전산유체공학회지
• /
• 제20권3호
• /
• pp.41-46
• /
• 2015

This paper describes study results on the development of an automatic program for generating surface-panel grid for the aircraft optimal design. The aerodynamic analysis is combined into a PIDO tool in conjunction with a number of programs in order to integrate processes for the optimal design. Due to design optimization's iterative feature, it may require lots of time and cost. To relieve this problem, cost-reduction of computation time for aerodynamic analysis is pursued by using the Panel-method, and reduction of grid generation time by automating surface panelling.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송∙미디어공학회 2017년도 하계학술대회
• /
• pp.137-138
• /
• 2017

ATSC 3.0 방송게이트웨이는 원격의 송신소에 설치된 다수의 송신기들(transmitters)과의 안정된 통신 링크(광케이블, M/W, 위성 등)을 통해 방송 미디어 패킷 스트림을 내보낸다. ATSC 3.0 표준에서는 방송 게이트웨이와 송신기 간 STL (Studio to Transmitter Link) 구간에 STLTP (STL Transport Protocol)를 정의하고, 멀티캐스트 구조 내에 IP 터널링(Tunneling) 형태로서 BB 프레임과 L1 시그널링 정보, 시간 정보를 싣도록 한다. 본 논문에서는 ATSC 3.0 기반의 방송 게이트웨이의 주요 기능 역할로서 단일주파수망(SFN)을 위한 패킷 스트림 구성 및 이를 위한 기능 구조에 대해 기술한다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.190-193
• /
• 2004

This paper presents studies on the creation time of scanning path using rapid prototype device. In the case of Jewellery, it needs to take time too much at the whole process of rapid prototype in accordance with heigh of the multi-layered. When increases the number of polygon by heigh of the Multi-layered, it has proper influence on the creation time of scanning path. Therefore, we can get the spending time and the number of polygon for the creation during increase the heigh of the multi-layered. These values are showed by the quantitative. We try to analyze relation between these and heigh of the multi-layered.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.903-906
• /
• 1995

In this paper,human body models have been manufactured by the use of rapid prototyping techniques, which are to be used for surgery planning in clinical practice. In this manufactacturing process, CT or MRI data of human bodies are prepared and the images are processed to obtain sectional contours. With these contours, three-dimensional surface triangulated models are constructed, which finally transformed to STL file for rapid prototyping. For this purpose, total service system for manufacturing of human body models is constructed by employing commercial softwares, and the related problems and process parameters are investigated

• 한국정밀공학회지
• /
• 제24권11호
• /
• pp.144-153
• /
• 2007

In order to generate the input data for rapid prototyping, a new approach which is based on the implicit surface interpolation method is presented. In the method a surface is reconstructed by creating smooth implicit surface from unorganized cloud of points through which the surface should pass. In the method an implicit surface is defined by the adaptive local shape functions including quadratic polynomial function, cubic polynomial function and RBF(Radial Basis Function). By the reconstruction of a surface, various types of error in raw STL file including degenerated triangles, undesirable holes with complex shapes and overlaps between triangles can be eliminated automatically. In order to get the slicing data for rapid prototyping an efficient intersection algorithm between implicit surface and plane is developed. For the direct usage for rapid prototyping, a robust transformation algorithm for the generation of complete STL data of solid type is also suggested.