• Journal of the Korean Chemical Society
• /
• v.46 no.1
• /
• pp.90-96
• /
• 2002

The STS contents, emphasized in the 6th curriculum, in the chemistry textbooks(II) were analyzed. The STS contents in textbooks showed average value of 2.7%. The chapter of ‘chemical bond and compound' were included 3.8% of STS contents. And the chapter of ‘atomic structure and periodic table', ‘state of material and solution', ‘science of material', and ‘chemical reaction' contained 3.2%, 2.2%, 1.9%, and 1.9% of STS contents, respectively. When the STS contents were analyzed by STS topics of Piel, the results are as follows; 33.7% on effect of technological developments, 27.5% on environmental quality and utilization of natural source, 19.6% on human engineering, 13.8% on energy, and 5.4% on sociality of science. However, there were no topics on population, space research and national defense. When the STS contents were analyzed by student activities of SATIS, most of the activities were research and case study. There were few field activities of practical investigation, problem solving and decision making, research design and stimulation. There were no activities of role play.

• Proceedings of the KWS Conference
• /
• 1998.05a
• /
• pp.150-154
• /
• 1998

The purpose of this paper is to investigate optimum welding conditions of STS 304 thin sheet by GTA welding and control 6 $\delta$--fenite which is harmful in mechanical processing, corrosion problem and can be formed brittle a phase in using long term at high temperature. One series of automatic welds was made using argon plus 10, 20, 30 % nitrogen to ensure a fully austenite deposit. Results obtained were summarized as follows: 1) 6 $\sigma$ferrite content in the weld metals is influenced largely by the nitrogen content. 2) Additions of nitrogen to the shielding gas can significantly reduce the amount of retained delta ferrite and result in an increase in hot cracking. 3) Bead width was increased when Ar + $N_2$ shielding gas was used and travel speed was increased. 4) Ar+$N_2$ shielding gas made weld metal ductile and reduce 6 -$\delta$-ferrite.

• Horticultural Science & Technology
• /
• v.29 no.4
• /
• pp.326-335
• /
• 2011

When bougainvilleas are subjected to indoor low-light conditions, flower bracts regularly abscise. This study elucidates the effects of plant growth regulators on bract longevity of potted bougainvillea. Potted 'Taipei Red' bougainvillea in four different bract development stages were treated with 1-MCP (1-methylcyclopropene), NAA (1-naphthaleneacetic acid), SNA (sodium salt of naphthaleneacetic acid), IBA (indolebutyric acid), BA (6-benzylaminopurine), $KH_2PO_4$ (potassium dihydrogen phosphate), Put (diamine putrescine), SA (salicylic acid), or STS (silver thiosulfate) and were moved to indoor low-light conditions after treatments. Experimental results indicate that 1-MCP, NAA, SNA, BA, Put, and SA prolonged bract longevity, and this effect increased as bract stage increased. The effect of STS was significant in early bract stages and decreased as bract stages increased. Additionally, 1-MCP, NAA, SNA, BA, Put, SA, and STS treatment significantly reduced endogenous ACC (1-aminocyclopropene-1-carboxylate) content and ACC oxidase activity, suggesting that the inhibition of ethylene production was achieved via physiological metabolism. However, treatment with IBA or $KH_2PO_4$ had no effect on the bract longevity at any stage. In the combined chemical treatments, NAA + STS or NAA + SA were effectively for prolonging bract longevity and contained less protein or chlorophyll degradation, decrease ACC oxidase or ethylene production than the control. In conclusion, we propose that combined chemical treatment significantly prolonged the bract longevity and more effectively than single chemical treatment at any stage.

• Journal of Powder Materials
• /
• v.14 no.6
• /
• pp.380-385
• /
• 2007

Characteristics of Al-based composites with waste stainless steel short fiber, fabricated by magnetic pulsed compaction and sintering were investigated. The compacts prepared by magnetic pulsed compaction showed high relative density and homogeneous microstructure compared with that by conventional press compaction. The relative density of sintered composites at $430^{\circ}C$ for 1 h exhibited the same value with compacts and decreased with increase in STS short fiber content. The reaction between Al and STS phase was confirmed by the microstructural analysis using EDS. The sintered composites, prepared by magnetic pulsed compaction, showed increased hardness value with increasing STS fiber content. Maximum yield strength of 100 MPa and tensile strength of 232 MPa were registered in the AI-based composite with 30 vol% STS short fiber.

• Environmental Engineering Research
• /
• v.20 no.2
• /
• pp.133-140
• /
• 2015

The aim of this study was to investigate the bacteriophage removal in various clay minerals and clay-amended soils. Batch experiments in kaolinite, montmorillonite, and bentonite showed that kaolinite was far more effective at the MS2 removal than montmorillonite and bentonite. In kaolinite, the log removal increased from 0.046 to 2.18, with an increase in the adsorbent dose from 0.3 to $50g\;L^{-1}$, whereas the log removals in montmorillonite and bentonite increased from 0.007 to 0.40 and from 0.012 to 0.59, respectively. The MS2 removal in kaolinite-amended silt loam soils was examined at three different soil-to-solution (STS) ratios. Results indicated that the log removal of MS2 increased with an increase in the kaolinite content and the STS ratio. At the STS ratio of 1:10, the log removal of MS2 increased from 2.33 to 2.80 with an increase in the kaolinite content from 0% to 10% in kaolinite-amended soils. The log removals of MS2 at the STS ratios of 1:2 and 1:1 increased from 2.84 to 3.47 and from 3.46 to 4.76, respectively, with an increase in the kaolinite content from 0% to 10%. Results also indicated that the log removals of PhiX174 and $Q{\beta}$ in kaolinite-amended soils were similar to each other, but they were far lower than those of MS2 at all the kaolinite contents. The log removal of PhiX174 increased from 0.16 to 0.32, whereas the log removal of $Q{\beta}$ changed from 0.17 to 0.22 with an increase in the kaolinite content from 0% to 10%.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.6
• /
• pp.860-866
• /
• 2009

It is very important to choose optimal material having good corrosion resistance and capabilities for the part materials such as the automotive exhaust system under a hot salt corrosion atmosphere. Generally, two types of corrosion come into the automotive exhaust system. One is 'Condensate Corrosion', which is occurred by exhaust gas condensate formed at the inner surface of exhaust system heated up during driving, which results in the acid condensate pitting. The other is 'High Temperature Salt Corrosion' occurring from the interaction between the chloride ion coming from salt at the seaside district or snow salt and the outer surface of exhaust system. By the corrosion attack, the main muffler is firstly damaged and the life cycle of an automobile is significantly decreased. It has been investigated that the hot salt corrosion properties of a STS 409L and 436L ferritic stainless steels which are well-known for the materials of the automotive exhaust system. In addition, the corrosion properties of hot dip aluminum coated STS 409L have been compared with uncoated steels. Aluminum coated STS 409L showed a superior corrosion resistance than uncoated STS 409L, and futhermore showed a better corrosion resistance than a STS 436L, which is an expensive ferritic stainless steel having a excellent corrosion resistance caused from more chromium content of an alloying element.

• Journal of the Korean Chemical Society
• /
• v.43 no.3
• /
• pp.321-327
• /
• 1999

The STS materials, emphasized in the 6th curriculum, in the chemistry part of middle school science textbooks were analyzed. The average value of the STS content of textbook was 13.2%. In the study of chapter of textbook, 15.9% of STS materials was included in the chapter of ？reaction of materials?, 12% in "character and separation of materials", and 10.8% in "composition of materials". When the STS topics classified by Piel were analyzed, the results were as follows; 40.2% on sociology of science, 28.8% on environmental quality and utilization of natural source, 20.4% on effects of technological developments, and 12.9% on energy. However, the topic on human engineering was only included in a textbook, and the topics on space research and national defence were not included in any textbooks. When the STS materials were analyzed by student activities of SATIS, the number of activities was 71. Most activities were consisted of solving problems and decision, simulation and data analysis, and there was no research design and role playing.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.302-303
• /
• 2014

유도결합플라즈마 보조 D.C.마그네트론 스퍼터링법을 이용하여 STS316L 위에 Ti-Cr-N 박막의 증착하였으며 크롬과 질소의 함량에 따른 부식특성 변화를 관찰하였다. Ti-Cr-N 박막을 증착시켰을 때는 미처리 STS316L에 비해 더 우수한 부식특성을 보였으며 크롬타겟의 인가전원이 100W 일 때와 질소비가 0.3일 때 가장 우수한 내부식 특성을 나타내었다.

• Journal of Korean Elementary Science Education
• /
• v.18 no.1
• /
• pp.29-39
• /
• 1999

The purpose of this investigation was to examine and compare pre-service and in-service elementary school teachers' beliefs about Science-Technology-and Society (STS), particularly beliefs about the nature of science and technology, their interaction within society, and the epistemology of science. Large percentage of pre-service and in-service elementary school teachers were understood to perceive as follows : 1. they regarded the science as 〃Knowledge scheme aiming content'and technology as 'skill for solution of actual problems'. 2. they revealed themselves to perceive tat science/ technology influence our lives through new terms and ideas, that science/ technology is affected by governmental policies and that all the people concerned including scientist and technologist should participate in the course of decision making. 3. they perceived that scientist perform their studies by characteristic abilities and that the studies are affected by their religious viewpoint. Moreover, they were understood to perceive that scientific knowledge are constructed through social interaction. 4. they perceived that scientist discover and develop scientific laws by scientific methods such as verification and certification, and that those scientific laws could be changed later.

• Journal of the Korean Society for Heat Treatment
• /
• v.20 no.2
• /
• pp.65-71
• /
• 2007

Microstructural changes and hardness variations in STS 304 steel have been investigated during the processes of carbide dispersion (CD) carburization; carburization, austenitization, subzero treatment and tempering. The carbon content of the surface layer increased up to maximum 4.0% after carburization, and the content was homogenized with the value of 2.3% to the $95{\mu}m$ from the surface after austenitization. The carbide appeared during CD carburization process was $Cr_7C_3$ type, which was composed network carbides along the austenite grain boundaries, square type carbides in the interior of the grain and fine nano-sized carbides. The fine nano-sized carbides precipitated at the austenitization stage and possibly subzero treatment stage were coarsened after tempering at $200^{\circ}C$, resulting the hardness decrease. The tempered steel without subzero treatment increased hardness with increasing time due to the continuous precipitation of fine carbides during tempering. The nano-sized carbide appeared square type morphology.