• 한국재료학회지
• /
• 제14권6호
• /
• pp.379-388
• /
• 2004

To investigate the effect of D-ferrite on the hot workability and surface defect of STS 304 billets containing 3 wt. % Cu, microstructure observations and high temperature mechanical properties test were carried out for the specimens extracted mainly from raw or oxidized billets. It was found that the total $\delta$-ferrite content has little influence on the hot workability, even though the fracture cracks due to high temperature tension or compression test were initiated and propagated mostly along $\delta$/${\gamma}$ boundary in the specimens. On the other hand, it was supposed that the direct causes of surface defects in the wire rolled from the as-continuously cast billet were the grain boundary embrittlement arose from the deep diffusion of oxygen into the grain boundary, and the oxidation of $\delta$-ferrite connected by a grain boundary to the surface during the billet reheating process as well.

• Nuclear Engineering and Technology
• /
• 제46권5호
• /
• pp.675-680
• /
• 2014

Pulverization of two different sized micro-$B_4C$ particles (${\sim}10{\mu}m$ and ${\sim}150{\mu}m$) was investigated using a STS based high energy ball milling system. Shapes, generation of the impurities, and reduction of the particle size dependent on milling time and initial particle size were investigated using various analytic tools including SEM-EDX, XRD, and ICP-MS. Most of impurity was produced during the early stage of milling, and impurity content became independent on the milling time after the saturation. The degree of particle size reduction was also dependent on the initial $B_4C$ size. It was found that the STS nanoparticles produced from milling is strongly bounded with the $B_4C$ particles forming the $B_4C$/STS composite particles that can be used as a neutron absorbing nanocomposite. Based on the morphological evolution of the milled particles, a schematic pulverization model for the $B_4C$ particles was constructed.

• 한국초등과학교육학회지:초등과학교육
• /
• 제24권1호
• /
• pp.30-42
• /
• 2005

In this study, we developed an elementary science performance assessment material on STS theme, especially the respiration. The material is constituted with 3 components, which are performance task, students' response format and scoring system, and it also has various objective domains such as applying science knowledge, improving science attitude, using ICT, communicating and reflective thinking. It offers teachers a tool by which they can assess students' abilities on a whole. The task is made with the motivation-evoking content of 'No Smoking'. It is constructed on the activity of writing a letter to his/her father not to smoke. The students' response format is made by problem solving process, and the scoring system is matched with the steps of students' response. The material involves several theoretical backgrounds and the strengths of performance assessment. In addition, due to the detailed students' format and scoring system, it can be used practically in elementary science classroom.

• Advances in nano research
• /
• 제15권6호
• /
• pp.533-539
• /
• 2023

This study aims to examine four machine learning (ML)-based models for their potential to estimate the splitting tensile strength (STS) of manufactured sand concrete (MSC). The ML models were trained and tested based on 310 experimental data points. Stone nanopowder content (SNPC), curing age (CA), and water-to-cement (W/C) ratio were also studied for their impacts on the STS of MSC. According to the results, the support vector regression (SVR) model had the highest correlation with experimental data. Still, all of the optimized ML models showed promise in estimating the STS of MSC. Both ML and laboratory results showed that MSC with 10% SNPC improved the STS of MSC.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 1996년도 특별강연 및 추계학술발표 개요집
• /
• pp.66-69
• /
• 1996

• Journal of Welding and Joining
• /
• 제33권4호
• /
• pp.37-43
• /
• 2015

Characteristics of dissimilar metal welds between STS 316L and carbon steel ASTM A516 Gr.70 made with GTAW have been evaluated in terms of microstructure, ferrite content, chemical analysis, hardness and corrosion resistance. Three heat inputs of 9.00, 11.25, 13.00kJ/cm were employed to make joints of dissimilar metals with ER309 wire. Based on microstructural examination, the amount of vermicular type of ${\delta}$-ferrite was increased with increasing heat input due to the increase of Creq/Nieq in the second layer of welds. Based on the EDX analysis of weld metals, Cr and Ni content in the 2nd layer increased while those content in the first layer of welds decreased with heat inputs. Cellular solidification mode in the 1st layer and dendritic solidification mode in the 2nd layer due to different cooling rates were prevailed, respectively. Heat affected zone which formed hard microstructure showed higher hardness than the weld metal. The salt spray test of dissimilar metals weld joints showed that the carbon steel surfaces only corroded. The weight loss rate due to corrosion increased up to 100hours but it decreased above 100 hours. There was little difference in the weight loss caused by corrosion regardless of heat inputs.

• 과학교육연구지
• /
• 제32권2호
• /
• pp.1-16
• /
• 2008

이 연구의 목적은 제7차 교육과정에 따라 편찬된 고등학교 과학 교과서와 차세대 과학 교과서를 STS적 교육내용을 중심으로 비교 분석하기 위한 것이다. STS의 내용들은 Yager의 STS 토픽과 Piel의 기준 그리고 학생들의 SATIS 활동 유형 등에 의해 분석 되었다. 연구결과, 차세대 과학 교과서는 Yager의 기준에 의한 STS 포함 비율은 20.9%로 기존 교과서의 평균인 11.3% 보다 증가한 것으로 나타났다. STS 구성요소 분석 결과 차세대 교과서의 경우 '지역사외와의 관련성'(59%), '과학의 응용성'(18.2%), '실제 문제에 대한 협동 작업'(13.6%) 순이었다. 차세대 과학 교과서는 '지역사회와의 관련성'요소가 기존 과학 교과서 보다 증가하였고 '과학과 관련된 직업에 대한 인식' 요소가 감소한 것이 큰 특징이다. '과학의 다차원성에 대한 인식', '정보의 선택 및 이용에 대한 평가' 등의 요소에 대해서는 차세대 과학 교과서는 포함되지 않은 반면에 기존 과학 교과서의 경우 낮은 비율이지만 어느 정도의 내용을 포함하는 것을 알 수 있다. Piel의 기준에 의한 STS 주제 영역에 관한 비교 분석에서 차세대교과서는 '환경의 질' 문제와 '우주개발과 국방' 문제를 다루고 있는 반면 기존 교과서의 경우 '기술발달의 영향', '천연자원' 등을 다루고 있다. SATIS 교수-학습 활동 영역에서 차세대 과학 교과서의 주된 활동은 '조사 연구', '모의실험', '자료 분석'등이며, 기존 교과서에서는 '역할 놀이', '연구고안', '모의실험'등의 활동은 거의 찾아 볼 수 없다. 따라서 차후 개발될 교과서에서는 '역할 놀이', '연구 고안', '모의실험'등의 활동이 포함되어야 할 것으로 생각된다.

• 한국표면공학회지
• /
• 제51권1호
• /
• pp.54-61
• /
• 2018

Plasma Nitriding treatment was performed on STS 204Cu stainless steel samples at a temperature of $400^{\circ}C$ for 15 hours with varying $N_2$ content as 10%, 15% and 25%. Regardless of the content of $N_2$, S-Phase which is a hardened layer of Nitrogen (N) supersaturated phase, was formed in the surface of plasma treated samples. When $N_2$ content was 25%, the thickness of the hardened layer reached up to about $7{\mu}m$ and the surface hardness reached a value of $560Hv_{0.05}$, which is about 2.5 times higher than that of untreated sample (as received $220Hv_{0.05}$). From potentiodynamic polarization test, it was observed that compared to as received sample, the corrosion potential and the corrosion current density of the plasma treated samples were decreased regardless of the $N_2$ content, but the corrosion resistance was not increased much due to the precipitation of $Cr_2N$. On the other hand, pitting potential of the samples treated with 10% and 15% $N_2$ was higher than that of as received sample, however, the samples treated with 25% exhibited a lower pitting potential. Therefore, 10% $N_2$ content was selected as optimum plasma nitriding condition and to further increase both the thickness and surface hardness and the corrosion resistance of the hardened layer, different $CH_4$ content such as 1%, 3% and 5% was introduced into the plasma nitriding atmosphere. With 1% $CH_4$, the thickness of the hardened layer reached up to about $11{\mu}m$ and the surface hardness was measured as about $620Hv_{0.05}$, which is about 2.8 times that of as received sample. And the corrosion resistance of the plasma treated sample by using 1% $CH_4$ was improved significantly due to much higher pitting potential, and lower corrosion current density. When the $CH_4$ content was more than 1%, the thickness and surface hardness of the hardened layer decreased slightly and the corrosion resistance also decreased.

• 한국표면공학회지
• /
• 제34권2호
• /
• pp.89-96
• /
• 2001

N- or O-doped STS304 stainless films were synthesized by an unbalanced magnetron sputtering process with various argon and reactive gas ($N_2$, $O_2$) mixtures. These films were examined by scanning electron microscopy (SEM), X-ray diffraction (XRD), Auger electron spectroscopy (AES) and Knoop microhardness tester. The Results from X-ray diffraction (XRD) analysis showed that a STS304 stainless steel film synthesized without reactive gas using a bulk STS304 stainless steel target had a ferrite bcc structure ($\alpha$ phase), while the N-doped STS304 stainless film was consisted of a nitrogen supersaturated fcc structure, which hsa a strong ${\gamma}$(200) phase. In the O-doped films, oxide Phases ($Fe_2$$O_3$ and $Cr_2$$O_3$) were observed from the films synthesized under an excess $O_2$ flow rate of 9sccm. AES analysis showed that nitrogen content in N-doped films increased as the nitrogen flow rate increased. Approximately 43 at.%N in the N-doped film was measured using a nitrogen flow rate of 8sccm. In O-doped film, approximately 15 at.%O was detected using a $O_2$ flow rate of 12sccm. the Knoop microhardness value of N-doped film using a nitrogen flow rate of 8 sccm was measured to be approximately $H_{ k}$ 1200 and this high value could be attributed to the fine grain size and increased residual stress in the N-doped film.

• 한국환경농학회지
• /
• 제11권1호
• /
• pp.50-58
• /
• 1992

대기오염의 주원인 오존이 식물이 미체는 피해를 경감시키고자 생장왜화제인 uniconazole를 0, 0.001, 0.01, 0.1mg/pot의 농도로 토양주입하고 다시 antiethylene제인 STS를 0, 0.3, 0.6mM로 엽면살포 한 후 0.2ppm의 오존에 20시간 계속하여 처리하였던 바 다음과 같은 결과를 얻었다. 1 Uniconazole은 식물체의 왜화정도가 클수록 오존에 대한 내성을 증대시켜 무처리구의 36% 피해에 비하여 11%까지 피해를 감소시킬 수 있었다. STS 처리도 uniconazole과 같은 정도의 피해감소를 보였으며 두 약제를 복합처리한 결과 단독처리 보다 낮은 농도의 처리로도 오존에 대한 내성을 증대시킬 수 있었다. 2. Uniconazole은 토마토의 초장 및 엽장을 감소시키고 chlorophyll함량을 증대시켰으며 증산량을 현저히 감소시켰으나, STS는 생장에는 영향을 미치지 않고 증산량을 다소 증가시켰다. 오존처리는 증산량을 현저히 감소시켰으며 uniconazole은 오존에 의한 증산량의 감소를 막아 주었으나 STS처리는 감소효과가 없었다. 3. Uniconazole과 STS는 모두 오존피해로 유발되는 ethylene의 발생량을 크게 경감시켰다. 그러나 uniconazole은 오존피해로 일어나는 자엽의 낙엽 및 잎의 epinasty증상을 방지시킬 수 없었는데 반하여 STS처리에서는 자엽의 낙엽과 epinasty현상을 뚜렷하게 막아 주었다. 4. SOD와 POD의 활성은 uniconazole에 의하여 약간 증가되었으나 STS는 두가지 효소의 활성변화에 별다른 영향을 미치지 않았다. 5. STS의 처리는 토마토의 개화를 3일 정도 촉진시켰고 uniconazole는 6-8일 정도 촉진시켰으며 두 약제 모두 착과율을 증진시켰다. 두 약제를 복합처리함으로써 오존피해로 인한 착과의 감소를 완전하게 막을 수 있었다. 6. 이상의 결과로 보아 uniconazole은 식물체를 왜화시킴으로 오존에 대한 내성을 증대시켜주는 효과가 큰데 비하여 STS는 주로 피해로 인하여 유발되는 ethylene의 작용을 억제함으로써 내성을 증대시키는 것으로 판단된다. 따라서 두 약제의 복합사용은 식물체의 왜화를 최소한으로 유도하면서 오존에 대한 내성을 증대시킬 수 있는 유용한 방법이라 생각된다.