• 한국압력기기공학회 논문집
• /
• 제20권2호
• /
• pp.170-177
• /
• 2024

Transportable Micro Reactors (TMRs) harness the advantages of Small Modular Reactors (SMRs) while addressing the need for mobility and transient power supply. These factory-manufactured reactors can be quickly installed and relocated, enhancing their practicality. This study evaluates radiation safety during transportation, focusing on exposure from radioactive sources within the reactor vessel. While significant radiation from fission products in the active core can be effectively shielded by the inner reflector, the induced radiation from surrounding components requires careful assessment to ensure compliance with exposure limits for operators. Given the constraints on the size and weight of the transport container, minimizing fast neutron leakage is crucial. Utilizing OpenMC for depletion calculations, we identify six key isotopes-Cr-51, Fe-59, Mn-54, Mn-56, Co-58, and Co-60-generated during a conservative operational scenario. Our findings indicate that maintaining surface doses below 10 mSv/h requires fast neutron leakage from the inner surface of the reactor vessel to be under 1.0E+8/cm²·sec. Therefore, optimizing core size and reflector thickness is essential for the effective design of TMRs without the need for additional shielding.

• Macromolecular Research
• /
• 제9권5호
• /
• pp.267-276
• /
• 2001

In order to endow with new bioactive functionality from demineralized bone particle (DBP) as natural source to poly(L-lactide) (PLA) synthetic biodegradable polymer, porous DBP/PLA as natural/synthetic composite scaffolds were prepared and compared by means of the emulsion freeze drying and solvent casting/salt leaching methods for the possibility of the application of tissue engineered bone and cartilage. For the emulsion freeze drying method, it was observed that the pore size decreased in the order of 79$\mu\textrm{m}$ (PLA control) > 47$\mu\textrm{m}$ (20% of DBP) > 23 $\mu\textrm{m}$ (40% of DBP) > 15$\mu\textrm{m}$ (80% of DBP). Porosities as well as specific pore areas decreased with increasing the amount of DBR. It can be explained that DBP acts like emulsifier resulting in stabilizing water droplet in emulsion. For the solvent casting/salt leaching method, a uniform distribution of well interconnected pores from the surface to core region were observed the pore size of 80 ∼70 $\mu\textrm{m}$ independent with DBP amount. Porosities as well as specific pore areas also were almost same. For pore size distribution by the mercury intrusion porosimeter analysis between the two methods, the pore size distribution of the emulsion freeze drying method was broader than that of the solvent casting/salt leaching method due to the mechanism of emulsion formation. Scaffolds of PLA alone, DBP/PLA of 40 and 80%, and DBP powder were implanted on the back of athymic nude mouse to observe the effect of DBP on the induction of cells proliferation by hematoxylin and eosin staining for 8 weeks. It was observed that the effect of DBP/PLA scaffolds on bone induction are stronger than PLA scaffolds, even though the bone induction effect of DBP/PLA scaffold might be lowered than only DBP powder, that is to say, in the order of DBP only > DBP/PLA scaffolds of 40 and 80% DBP > PLA scaffolds only for osteoinduction activity. In conclusion, it seems that DBP plays an important role for bone induction in DBP/PLA scaffolds for the application of tissue engineering area.

• Macromolecular Research
• /
• 제10권3호
• /
• pp.158-167
• /
• 2002

In order to endow with new bioactive functionality from small intestine submucosa (SIS) powder as natural source to poly (L-lactide) (PLA) and poly (lactide-co-glycolide) (PLGA) synthetic biodegradable polymer, porous SIS/PLA and SIS/PLGA as natural/synthetic composite scaffolds were prepared by means of the solvent casting/salt leaching methods for the possibility of the application of tissue engineered bone and cartilage. A uniform distribution of good interconnected pores from the surface to core region was observed the pore size of 40~500 ${\mu}{\textrm}{m}$ independent with SIS amount using the solvent casting/salt leaching method. Porosities, specific pore areas as well as pore size distribution also were almost same. After the fabrication of SIS/PLA hybrid scaffolds, the wetting properties was greatly enhanced resulting in more uniform cell seeding and distribution. Five groups as PGA non-woven mesh without glutaraldehyde (GA) treatment, PLA scaffold without or with GA treatment, and SIS/PLA (Code No.3 ; 1 : 12 of salt content, (0.4 : 1 of SIS content, and 144 ${\mu}{\textrm}{m}$ of median pore size) without or with GA treatment were implanted into the back of nude mouse to observe the effect of SIS on the induction of cells proliferation by hematoxylin and eosin, and von Kossa staining for 8 weeks. It was observed that the effect of SIS/PLA scaffolds with GA treatment on bone induction are stronger than PLA scaffolds, that is to say, in the order of PLA/SIS scaffolds with GA treatment > PLA/SIS scaffolds without GA treatment > PGA nonwoven > PLA scaffolds only with GA treatment = PLA scaffolds only without GA treatment for the osteoinduction activity. The possible explanations are (1) many kinds of secreted, circulating, and extracellular matrix-bound growth factors from SIS to significantly affect critical processes of tissue development and differentiation, (2) the exposure of SIS to GA resulted in significantly calcification, and (3) peri-implant fibrosis due to covalent bonding between collagen molecule by crosslinking reaction. In conclusion, it seems that SIS plays an important role for bone induction in SIS/PLA scaffolds for the application of tissue engineering area.

• 한국재료학회지
• /
• 제11권10호
• /
• pp.820-832
• /
• 2001

In order to obtain the basic data on the optimum conditions of electroforming process for fabricating the micro wiring pattern for plate type micro- motor core, characteristics of plating bath and properties of deposits were studied with various copper plating baths which contain sulfate, fluoborate, pyrophosphate and cyanide salt, respectively. Cathodic polarization, throwing power, internal stress, texture and surface morphology of deposits were observed. Throwing power of plating solution is deeply related to the polarization curves and the values are in the range of +20∼20%. The order of values ate as follows- pyrophosphate, cyanide, sulfate and fluoborate bath. Internal stresses of deposits are tensile in all of the copper plating bath. Thickness of the deposits plated at the center of holes has the highest value in the pyrophosphate bath and K factor, ratio of height and width of deposit, is 1.44. It was confirmed that the pyrophosphate bath was the best one for the electroforming of wire pattern.

• Journal of Plant Biotechnology
• /
• 제43권3호
• /
• pp.281-292
• /
• 2016

Plants can recognize and respond in various ways to diverse environmental stresses, including pathogenic microorganisms, salt, drought, and low temperature. Salicylic acid (SA) is one phytohormone that plays important roles in the regulation of plant growth and development. Nonexpressor of pathogenesis-related genes 1 (NPR1) was originally identified as a core protein that could function as a transcriptional co-regulator and SA receptor during systemic acquired resistance (SAR), a plant immune response that could activate PR genes after pre-exposure of a pathogen. Although the function of NPR1 in plant defense response and the role of SA hormone in the regulation of plant physiological processes have been well characterized, the biological role of NPR1 in plant abiotic stress responses is largely unknown. In this review, we will summarize and discuss the current understanding of NPR1 function in response to plant environmental stresses.

• Molecules and Cells
• /
• 제23권2호
• /
• pp.207-214
• /
• 2007

lant ${\beta}$-1, 3-glucanases are involved in plant defense and in development. Very little data are available on the expression of rice glucanases both in developmental tissues and under various stresses. In this study, we cloned and characterized twenty-seven rice ${\beta}$-1, 3-glucanases (OsGlu) from at total of 71 putative glucanases. The OsGlu genes were obtained by PCR from a cDNA library and were classified into seven groups (Group I to VII) according to their DNA or amino acid sequence homology. Analysis of the expression of the twenty-seven OsGlu genes by Northern blotting revealed that they were differentially expressed in different developmental tissues as well as in response to plant hormones, biotic stress, high salt etc. OsGlu11 and 27 in Group IV were clearly expressed only in stem and leaf and were also induced strongly by SA (5 mM), ABA ($200{\mu}M$), and M. grisea. OsGlu1, 10, 11, and 14 were induced earlier and to higher levels in incompatible M. grisea interaction than in compatible one. Taken together, our findings suggest that the twenty-seven rice OsGlu gene products play diverse roles not only in plant defense but also in hormonal responses and in development.

• Bulletin of the Korean Chemical Society
• /
• 제30권7호
• /
• pp.1521-1525
• /
• 2009

Thermosensitive block copolymers of ethylene oxide and N-isopropylacrylamide (NIPAM) were synthesized. A five armed star shape oligo(ethylene oxide) initiator with a cyclotriphosphazene core was prepared and used for the atom transfer radical polymerization (ATRP) of NIPAM. The lower critical solution temperatures (LCSTs) of the copolymers were 36 to 46 ${^{\circ}C}$, higher than that of PNIPAM (32 ${^{\circ}C}$), depending on their molecular weights. The copolymers were soluble in water below the LCSTs but formed micelles above the LCSTs. The thermosensitive micellization behaviors of the polymers were investigated by fluorescence spectroscopy. With increasing the temperature of an aqueous solution of P2 and pyrene above the LCST, the peak of 333 nm red-shifted to appear around 339 nm and its intensity increased significantly, indicating the micelle formation. The transfer of pyrene into the micelles was also confirmed by a confocal laser scanning microscope. The fluorescence image obtained from P2 in an aqueous pyrene solution exhibited a green emission resulting from the pyrene transferred into the micelles. Salt effects on the solubility of the copolymers in an aqueous solution were investigated. The LCST of P2 decreased sharply as the concentration of sodium chloride increased, while decreased slowly with potassium chloride.

• 한국세라믹학회지
• /
• 제29권8호
• /
• pp.667-673
• /
• 1992

The alumina-zirconia composite powders of core particle ZrO2 coated with Al2O3 were prepared by the hydrolysis-deposition of the mixed aluminum salt solution of Al2(SO4)3-Al(NO3)3-Urea. The effects of hydrolysis reaction and coating parameters on characteristics of coated powders and composites were also investigated. The degree of coating could be estimated from the ratio of tetra-/mono-ZrO2 present at the room temperature after heat-treating coated powders at 120$0^{\circ}C$ and the result of TEM observations. When the content of ZrO2 in the dispersed coating system, the coating time, and the volume ratio of water/solution were 50 mg/g, 180 min, and 5, respectively the coating efficiency was maximum (the ratio of tetra-/mono-ZrO2 was 87/13). The relative densities of coated Al2O3-ZrO2 composites sintered at 1$650^{\circ}C$ for 4 hrs were about 91~98% and the maximum ratio of tetra-/mono-ZrO2 in Al2O3-20wt% ZrO2 composites was 62/38.

• 한국식생활문화학회지
• /
• 제36권3호
• /
• pp.265-273
• /
• 2021

The Chinese Sigyeong records the foods of the Primitive Pickling Period, pickling being a universal vegetable storage method, but does not indicate the origin of the pickled vegetables or the location of the source of transmission. Kimchi mainly used salt and sauce-based soaking materials at the beginning of the Fermented Pickling Period (beginning in the 1st to 3rd centuries A.D.), and it differed from the Chinese method, which used alcohol and vinegar. In the Umami-Flavored Pickling Period (beginning in the 14th and 15th centuries A.D.), jeotgal, fermented seafoods, were added, and pickles with a completely new identity were created, one different from any other pickles in the world. Lastly, entering the Complex Fermentation and Pickling Period (beginning in the 17th and 18th centuries), the technical process evolved using a separate special seasoning containing red pepper as the secondary immersion source after pickling in brine, the primary immersion source. As a result of this, kimchi was transformed into a food with a unique form and taste not found anywhere else. The unique characteristic of kimchi is that the composition of original materials, a combination of salted marine life and vegetable ingredients, is its core identity, and there is a methodological difference in that it is completed through a second process called saesaengchae (生菜)-chimchae (沈菜).

• 헤리티지:역사와 과학
• /
• 제53권2호
• /
• pp.64-87
• /
• 2020

중국의 돈황 막고굴 벽화 등 서북지방에서 처음 사용된 copper trihydroxychloride(아타카마이트, 파라타카마이트, 보탈라카이트 등)는 고대부터 동록, 녹염, 염록으로 알려져 왔으며, 중국에서는 석록과 함께 중요 녹색 안료로 사용되어 왔다. 처음에는 천연 광물인 녹염동광이 사용되었지만 5대 이후에는 합성 copper trihydroxychloride가 주로 사용되었다. 중국 문헌에는 동록, 녹염, 염록은 구리 분말, 광명염(염화나트륨), 요사(염화암모늄)을 반응시켜 만드는 것으로 기록되어 있으며, 이렇게 제조된 물질은 copper trihydroxychloride로 분석되었다. 한국에서는 고려시대까지의 회화에서는 발견되지 않았지만, 조선시대 회화(초상화, 산수화, 기록화, 장식화, 불화, 무속화 등)와 건축물 단청의 녹색 안료 분석에서 석록과 함께 중요 녹색 안료로써 사용되었음이 밝혀졌다. 특히 불화, 무속화, 단청, 기타 채색 유물에서는 석록보다 사용 빈도가 높았다. 조선시대에서 사용된 copper trihydroxychloride 안료는 일부 회화의 녹색 안료 분석에서 합성 copper trihydroxychloride가 확인되었지만, 나머지 회화 등의 분석에서는 합성 안료인지 천연 안료인지는 불명확하였다. 문헌과 유물 분석을 통해 조선에서 사용된 copper trihydroxychloride의 안료명은 진한 녹색인 하엽으로 판단되며, 옅은 녹색의 삼록과 함께 주로 사용되었다. 하엽은 조선초(15세기) 중국에서 배워와 처음으로 제조되어 19세기 말까지 계속 제조되었으며, 중국으로부터 수입품도 사용된 것으로 보인다. 중국의 채색 유물의 합성 copper trihydroxychloride 안료와 조선의 합성 copper trihydroxychloride의 입자 특성(어두운 코어를 가진 원형 또는 타원형 입자)이 비슷하였다. 따라서 한국과 중국의 합성 copper trihydroxychloride 안료는 유사한 방법으로 제조된 것으로 추정된다.