• 한국의류산업학회지
• /
• 제11권6호
• /
• pp.968-973
• /
• 2009

To get a variety of colors on silk fabrics with natural dyes, mordanting and combination dyeing were carried out. Gromwell, sappan wood, safflower were used as the three primary colors for combination dyeing. Metal compounds containing alum and iron were used as mordanting agents. In combination dyeing of safflower and sappan wood, safflower and gromwell, gromwell and sappan wood, various colors were obtained according to the content of dyes used. Safflower/sappan wood dyeing showed different colors between yellow red and red purple of Munsell color circle such a YR, R and RP. And safflower/gromwell dyeing showed R, RP, P and PB Munsell color circle and then gromwell/sappan wood showed R, RP and P. As the result of these experiments, wide range of colors (YR-R-RP-P-PB-B) were obtained according to various mixing portion of safflower, gromwell, sappan wood, dyebath pH and repetition dyeing.

• 융합정보논문지
• /
• 제11권6호
• /
• pp.188-197
• /
• 2021

본 연구에서는 소목(Caesalpinia sappan L.) 분말을 활용한 모발 염색의 최적 조건을 결정하였고, 키토산 처리가 소목 분말의 모발 염색성에 미치는 영향을 조사하였다. 소목 분말의 혼합비율, 염색시간 및 온도에 따른 염색성을 확인한 결과 소목 분말과 물의 비율을 1:3(w/w)로 하여 40℃에서 60분 동안 처리하는 것이 모발 염색에 가장 효과적인 것으로 나타났다. 또한 키토산의 분자량, 처리 농도와 처리 순서가 소목 분말의 염색성에 미치는 영향을 확인한 결과 저분자량(~30 kDa)의 키토산을 1%(w/w)의 농도로 소목 분말 처리에 앞서 전처리를 하는 것이 염색성 향상 및 유지에 가장 효과적이었다. 결론적으로 모발 염색에 있어서 저분자량의 키토산은 매염제로서 소목 분말의 염색 효율과 유지력 향상에 크게 도움이 되는 것으로 판단된다.

• 한국의상디자인학회지
• /
• 제14권4호
• /
• pp.151-162
• /
• 2012

Regarding experimental study on the dyeing properties of natural dye, I have dyed silk fabric with Styphnolobium japonicum, sappan wood, and indigo. The results of the experiment have been analysed by wavelength of maximum absorption, K/S and CIE Lab chromaticity co-ordinated. The results are as follows: In case of complex dyeing using Styphnolobium japonicum and sappan wood, dyeing with sappan wood, which is red related color, after dyeing with Styphnolobium japonicum, which is yellow related color, is more efficient. When dyeing was maden by complex of Styphnolobium japonicum and sappan wood, Dyeing method by the order of "Styphnolobium japonicum${\rightarrow}$sappan wood${\rightarrow}$mordanting" made the best result of complex dyeing. In case of complex dyeing using Styphnolobium japonicum and Indigo, dyeing with Styphnolobium japonicum after the indigo made the best result. When dyeing with indigo first, and then Styphnolobium japonicum, yellow color was not well dyed, and low level of saturation caused lusterless color. Ordering of Styphnolobium japonicum${\rightarrow}$sappan wood${\rightarrow}$indigo made the best result of complex dyeing in case of complex dying with Styphnolobium japonicum and indigo. Dyeing order, sappan wood first and then indigo last method shown 560~640 nm wavelength of maximum absorption which most color was blue related. In contrast, Indigo first and then sappan wood method shown 460~560nm wavelength of maximum absorption which color was red related. Complex dyeing with sappan wood and indigo was showing lusterless color. In case of dyeing with red and blue, dyeing with sappan wood and indigo was not appropriate.

• 한국염색가공학회지
• /
• 제25권4호
• /
• pp.314-326
• /
• 2013

The purpose of this research is to analyze the effects of Dansam and Sappan wood extract to perform combination dyeing on silk fabrics, with respect to color changes, fastness (washing, dry cleaning, perspiration, rubbing and light fastness), and functionality (antibacterial activity and deodorization). Combination dyeing was performed by first combining Dansam with Sappan wood, then Sappan wood with Dansam, in these orders. Given the changes in the combination ratio, pre-mordant treatment was performed. Looking at the surface colors of each dye, Dansam generally produces YR color series, while Sappan wood produces YR, R, and RP color series. The effects of changing the order in which combination dying was performed on the surface colors were as follows. First, combination dyeing (A) was performed by using Dansam before Sappan wood, to produce YR and R color series. Then combination dyeing (B) was performed by using Sappan wood before Dansam, to produce YR, R, and RP color series. By visual inspections, more similar color changes of the combination dyeing were noticed with the post-dyeing material rather than the pre-dyeing material. Therefore, it was presumably confirmed that surface color changes of combination dyeing were greatly influenced by the post-dyeing color. Individual dyeing tests for fastness showed that Dansam was comparatively superior to Sappan wood, which demonstrated lower fastness to washing, dry cleaning, perspiration, and light, relatively. The fastness of combination dyed samples was shown middle, but similar fastness to the post-dye material, The fastness of (B) method was higher than (A) method in the washing and light fastness. This confirms that color fastness from combination dyeing was considerably influenced by the post-dye material. It was found that all dyed samples had a very high bacterial reduction rate of 99.9% and high deodorization rate of 95%.

• 한국의류산업학회지
• /
• 제4권2호
• /
• pp.192-197
• /
• 2002

On the whole the various medium colors were developed by repeat dyeing with different colorants after dyeing with one colorant in case of natural dyeing. In this study, however in order to obtain various colors on silk fabrics with natural dyes, pre-mordanting and combination dyeing were carried out. Metal compounds containing alum, copper and iron were used for pre-mordants. Gardenia and Sappan wood were used as colorants for combination dyeing. In combination dyeing of Gardenia and Sappan wood, these two natural colorants showed good miscibility in dye bath. The various colors were obtained according to various metal compounds for pre-mordants and various mixing portion of Gardenia and Sappan wood.

• 한국염색가공학회지
• /
• 제19권6호
• /
• pp.12-20
• /
• 2007

Four kinds of natural dying solutions (natural colorant extracts)were obtained by extraction from sappan wood, black tea, peony, and clove using water as extracting solvent at $90^{\circ}C$ for 90 min with liquor ratio (solid natural colorant material/solvent water, weight ratio) of 1/10. The dyeing, colour fastness and deodorizing properties of fabrics (cotton, silk, and wool fabrics) dyed with natural colorant extracts were compared. It was found that these properties were significantly dependent on the concentration of extracts, the structure of colorant, and the kind of fabrics. The K/S value of dyed cotton fabric increased in the order of peony < sappan wood < clove < black tea, however, the values of dyed silk and wool fabrics were in the order of peony < sappan wood < black tea < clove. Colour fastness (light, water, and perspiration fastness) was in the range of 3 - 5 grade except for sappan wood. The deodorizing performance of fabrics dyed with various natural colorants extracts was in the range of 56 - 99%. The deodorizing performance increased in the order of peony < black tea < sappan wood < clove. Especially, the deodorizing performance of all fabrics dyed with clove was found to be the highest at 98-99%.

• 펄프종이기술
• /
• 제43권1호
• /
• pp.1-10
• /
• 2011

To investigate the combination dyeing properties of natural dyes, the combination dyeing using gallnut,-Al, Cu, Fe-sappan wood, and gallnut-Al, Cu, Fe-gardenia was performed on bast fiber of mulberry, cotton, silk, and their K/S values, colors, and sunlight fastness were measured. The gallnut-Al, Cu, Fe-gardenia dyeing showed the highest K/S values when the dyeing concentration of gallnut is 3%. It tended to show the higher K/S values than gallnut-Al, Cu, Fe-sappan wood. The silk showed the highest values of in K/S, and then followed by cotton, and bast fiber of mulberry. The mordants developed different colors on the bast fiber and the cotton treated with gallnut-Al, Cu, Fe-sappan wood. However, the silk showed a series of YR, showing no effect of the mordants on the development of color. The combination dyeing of gallnut-Al, Cu, Fe-gardenia showed a series of Y. The results showed that sappan wood could develop various colors but gardenia could develop a series of Y. No distinct improvement on sunlight fastness of the combination dyeing was observed.

• Journal of the Korean Wood Science and Technology
• /
• 제48권2호
• /
• pp.154-165
• /
• 2020

To assign the functionality of the regenerated fiber from waste MDF(wMDF) made of pitch pine, we examined the dyeing characteristics of natural dyes, sappan wood as a polychromatic natural red series, monochromatic gardenia as a yellow series, and indigo blue series. For nonemordanting dye, the colors of regenerated fiber dyed by sappan wood and gardenia were reddish yellow (YR) and yellow (Y) series, respectively, and dyeing conditions were appropriate a 30 ~ 50 g/L of dyeing materials at 60 ℃ for 60minutes of dyeing time. We obtained regenerated woody dyed fibers (Re-WDF), YR to the red (R) series by premordanting with Al and Cu mordant for sappan wood and the purplish red (RP) series by Fe premordanting. In the case of gardenia, only Y series colors were developed in nonemordanting dye or all three mordants. Indigo dye produced Re-WDF with greenish yellow (GY) tone at 1%, green (G) tone at 3%, and blue (B) tone at 5% concentration or more. Re-WDF with indigo showed the best light fastness followed by sappan wood and gardenia. In particular, the light fastness of Re-WDF with gardenia was very poor. The light fastness was somewhat improved by premordanting(Fe>Cu>Al) both sappan wood and gardenia dyes.

• 한국염색가공학회지
• /
• 제14권4호
• /
• pp.229-239
• /
• 2002

Colorants were extracted from the heartwood of sappan lin. with MeOH under reflux, and the concentrate or the powder of dye was prepared by low pressure concentration method using suitable organic solvent. Various components were isolated from sappan wood, and the chemical structure and mechanism of compound having the excellent antibacterial and deodorization properties were analyzed. The results obtained are as follows ; The seventeen components of sappan wood were seperated by HPLC chromatography, and the five components among them were existed more than 6% and the other components were existed lower than 0.6%. The resolving powers of the non-polar solvent and polar solvent systems were evaluated by their ability to resolve the samples. It showed that chloroform-methanol-water(800:150:10) system has the best resolving power. Although the seperation rate is very slow, polyamide C-100 column chromatography gives a clear seperation of sappan wood. On the basis of the spectrometric data such as IR, UV, $GC-Mass,\;^1H-NMR,\;^{13}C-NMR\;and\;^1H-^{ 13}C-NMR$, the chemical structure of compound haying the excellent antibacterial and deodorization properties was established as brazilin containing the functional groups such as two quaternary carbon, one benzyl carbon, methylene contiguous to oxygen and methylene caused by oxygen atom.

• 한국의류산업학회지
• /
• 제6권2호
• /
• pp.239-244
• /
• 2004

On the whole the various medium colors were developed by repeat dyeing with different colorants after dyeing with one colorant in case of natural dyeing. In this study, in order to obtain various colors on wool fabrics with Gardenia and Sappan wood colorants, pre-mordanting and combination dyeing were carried out. Gardenia and Sappan wood used as natural colorants for combination dyeing showed good miscibility in dye bath, Metal compounds containing alum, copper and iron were used for pre-mordants. The various medium colors such as yellow-red were obtained according to various metal compounds for pre-mordants and various mixing portion of these natural colorants. The surface reflactance spectra and color characteristics of wool fabrics by mordanting and combination dyeing were investigated.