• 한국자동차공학회논문집
• /
• 제8권2호
• /
• pp.33-40
• /
• 2000

In order to investigate the exhaust structure and secondary oxidation of unburned hydrocarbon (HC) in the exhaust port, a numerical simulation was performed with 3-dimensional flow model and oxidation mechanism optimized for port oxidation. To predict the exhaust and oxidation process with consideration of flow, mixing, and temperature, 3-dimensional flow model and HC oxidation model were used with a commercial computational program, STAR-CD. The flow model were with moving grid for valve motion, which could predict the change of flow field with respect to valve lift. Optimization was performed to predict the HC oxidation with temperature range of 1200~1500K, low HC and oxygen concentration, existence of intermediate species, as typical in port oxidation. The constructed model could predict the port oxidation process with oxidation degree of 14~48% according to the engine operation conditions.

• Bulletin of the Korean Chemical Society
• /
• 제26권5호
• /
• pp.802-804
• /
• 2005

• 한국산업융합학회 논문집
• /
• 제27권2_2호
• /
• pp.397-402
• /
• 2024

Silicon carbide materials undergo an oxidation reaction in a high-temperature oxidizing environment and show different characteristics depending on the test temperature and time. In particular, the added oxides form a secondary phase within the sintering process and exhibit different oxidation characteristics depending on the added sintering materials. Therefore, to evaluate the oxidation characteristics, the weight of the test piece and the thickness of the oxidation layer were observed, and the structure and oxidation characteristics of the material were analyzed using SEM. SEM observation showed that an oxide layer was formed on the surface of the liquid sintered silicon carbide material after it was oxidized at 1200 ℃, 1300 ℃, and 1400 ℃ for 10 hours, respectively. Then, a bending test was performed at each temperature on the test piece with the oxidation layer formed to evaluate the change in flexural strength. The strength was 466.6 MPa at 1200 ℃, 363.1 MPa at 1300 ℃, and 350.8 MPa at 1400 ℃. Al₂O₃-SiO₂ oxidized at 1200 ℃ for 10 hours showed an increase in strength of about 21.0 MPa compared to the data before the oxidation test.

• 한국포장학회지
• /
• 제24권1호
• /
• pp.13-16
• /
• 2018

Powdered infant formula is susceptible to oxidation in the presence of oxygen. Even though the product is usually packaged in nitrogen atmosphere, the oxygen ingress through the package layer may occur in case of flexible pouches and affects the oxidation of the product. $O_2$ barrier of the package is thus important variable to protect the product from oxidative deterioration. $O_2$ barrier property was investigated for aluminum-laminated small pillow packs of $3.5{\times}17.5cm$. Storage temperature and combination of primary and secondary packages were evaluated as variables affecting the barrier for conditions of empty pouch flushed with nitrogen. Apparent oxygen transmission rate of the primary package exposed to air was $2.32{\times}10^{-3}mL\;(STP)\;atm^{-1}\;d^{-1}$ at $30^{\circ}C$ and its temperature dependence could be explained by activation energy of $28.5kJ\;mol^{-1}$ in Arrhenius relationship. The additional secondary package of nylon/PE film containing 20 primary packages was ineffective in modulating package $O_2$ transmission and was only marginally helpful when combined with oxygen scavenger. The same was true in suppressing the product oxidation when the primary package was filled with 14 g of the formula.

• 한국환경보건학회지
• /
• 제26권3호
• /
• pp.61-68
• /
• 2000

The use of photo-catalytic processes in pollution abatement and resource has a significant economic importance. Therefore, the applications of photochemical oxidation of secondary effluent driven by UV, TiO2, TiO2/UV, H2O2/UV and TiO2/H2O2/UV, have been investigated in order to treat the secondary effluent from municipal sewage. Various experimental parameters such as BOD, CODcr, Nurbidity, total P, and SPC were examined in each photo-catalytic reaction system. The results showed that the application of single oxidant such as UV, TiO2 only has a minor effect on parameters reduction (CODcr, BOD, etc) to treat the secondary effluent, whereas the combinations of oxidants increase the removal efficiency. The best removal efficiency in every parameters was achieved by the combination of TiO2, H2O2 and UV. It was also found that the optimum amount of TiO2 for the treatment was 1g/ι to achieve water reuse standard. From the results, the photocatalytic reaction system can be an alternative as a post-treatment to treat the secondary effluent from municipal sewage.

• 생명과학회지
• /
• 제2권2호
• /
• pp.91-96
• /
• 1992

효소에 의한 carotenoid의 co-oxidationgus상은 lipoxygenasechrao하에서 지방산인 linoleic acid가 산화되어 이때 만들어진 free radical에 의해 carotenoid가 쉽게 산화되기 때문에 일어나는 현상이다. 이화같이 carotenoid의 co-oxidation에서 lipoxygenase는 free radical을 만들면서 반응속도를 빠르게 하는 촉매제의 역할을 다음과 같이 담당하고 있다고 할 수 있다. Lipoxygenase에 의한 carotenoid의 co-oxidation 현상을 처음 발견한 것은 대두가루를 밀가루와 혼합하여 사용할 때였다. 대두가루 속에 다량 함유된 lipoxygenase에 의해 밀가루의 carotenoid 색소가 표백되는 것을 보고 이 현상은 lipoxygenase에 의해 기질은 지방산이 산화되는 동안 caroenoid가 쉽게 co-oxidation되기 때문이라는 것을 알아내었다. 즉, carotenoid는 지질이 존재하는 반응시스템에서 항산화제로서 혹은 secondary substrate로서 작용한다고 할 수 있다.

• 대한기계학회논문집B
• /
• 제24권5호
• /
• pp.660-667
• /
• 2000

In order to investigate the exhaust structure and secondary oxidation of unburned hydrocarbon (HC) in the exhaust port, concentrations of individual HC species were measured in exhaust process, the degree of oxidation were obtained. Using a solenoid-driven fast sampling system on single-cylinder research engine fueled with 94% propane, the profiles of unburned hydrocarbons (HCs) and non-fuel HCs with a propane fueled engine were obtained from several locations in the exhaust port during the exhaust process. The sampled gases were analyzed using a gas chromatography of HC species with 4 or lesser carbon atoms. The change of total HC concentration and HC fractions of major components through the exhaust port were discussed. The results showed that non-uniform distribution of HC concentration existed around the exhaust valve and changed with time, and that the exhaust gas exhibited nearly uniform concentration profile at port exit, which was due to mixing and oxidation. Also it could be known that bulk gas with relatively high HC concentration came out through the bottom of the exhaust valve. To estimate the mass-based degree of HC oxidation in the exhaust port from measured HC concentrations, a 3-zone diagnostic cycle simulation and plug flow modeling were used. The degree of oxidation ranged between 26 % and 36 % corresponding to the engine operation conditions.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2016년도 추계학술대회 논문집
• /
• pp.173.2-173.2
• /
• 2016

A two-step oxidation method was applied on Al6061 to debate the growth mechanism of plasma electrolytic oxidation (PEO) coating. The specimens were first oxidized in the primary electrolyte solution {$Na_3PO_4$ (8g/l), NaOH (2g/l), consequently, the specimens were transferred into a different electrolyte {$K_2ZrF_6$ (8g/l), NaOH (2g/l), $Na_2SiF_6$ (0.5g/l)} for further oxidation. The processes was conducted for various processing times. It was found the second step electrolyte component were reached to inner layers, in contrast to the primary step components which were thrustle to the outer layer. The presence of the secondary component in the inner layers were significantly varied with processing time which suggest the change in growth properties with processing time. further more the inside growth of the secondary component confirmed the increasing trend in the downward growth of the coating layer. The corrosion and hardness properties of the coatings were found highly improved with change in growth features with increasing the processing time.

• 한국식품과학회지
• /
• 제26권6호
• /
• pp.655-658
• /
• 1994

가열 산화된 유지들의 품질평가를 위한 방법의 하나로 분광기를 이용한 산화생성물외 측정과 여러가지 이화학적 향수들을 분석하였다. 산값은 가열시간의 경과에 따라 증가하는 경향이었으며, 특히 가열산화의 경우 대두유가 팜유 및 팜을레인유 보다 상승이 뚜렷하였다. 아니시딘값 및 공액중지방산값은 가열시간의 경과에 따라 중가하는 경향이었으며 팜유 및 팜을레인유보다 대두유에서 크게 상승하는 경향이었다. AOM 안정성의 변화는 팜유, 팜을레인유, 대두유외 순으로 좋게 나타났다. 또한, 가열산화유지의 산과정도를 POM과 SOM으로 측정할 수있었고, 일차 및 이차산화생성물은 가열산화시간에 따라 전반적으로 빠르게 중가하는 경향을 나타내었다. 본 연구의 결과로서 간단한 분광기를 이용하여 가열유지중의 POM과 SOM을 신속하게 측정할 수 있었고, 산업적으로 가열유지의 품질을 평가하는 방법의 하나로 사용가능할 것으로 본다.

• Bulletin of the Korean Chemical Society
• /
• 제5권5호
• /
• pp.204-205
• /
• 1984