• Geomechanics and Engineering
• /
• 제24권4호
• /
• pp.359-370
• /
• 2021

Joint roughness is combination of primary and secondary roughness. Ordinarily primary roughness is a geostatistical part of a joint surface that has a periodic nature but secondary roughness or unevenness is a statistical part of that which have a random nature. Using roughness generating algorithms is a useful method for evaluation of joint roughness. In this paper after determining geostatistical parameters of the joint profile, were presented two roughness generating algorithms using Mount-Carlo method for evaluation of primary (GJRGAP) and secondary (GJRGAS) roughness. These based on geostatistical parameters (range and sill) and statistical parameters (standard deviation of asperities height, SDH, and standard deviation of asperities angle, SDA) for generation two-dimensional joint roughness profiles. In this study different geostatistical regions were defined depending on the range and SDH. As SDH increases, the height of the generated asperities increases and asperities become sharper and at a specific range (a specific curve) relation between SDH and SDA is linear. As the range in GJRGAP becomes larger (the base of the asperities) the shape of asperities becomes flatter. The results illustrate that joint profiles have larger SDA with increase of SDH and decrease of range. Consequencely increase of SDA leads to joint roughness parameters such Z2, Z3 and RP increases. The results showed that secondary roughness or unevenness has a great influence on roughness values. In general, it can be concluded that the shape and size of asperities are appropriate parameters to approach the field scale from the laboratory scale.

• 터널과지하공간
• /
• 제24권1호
• /
• pp.89-96
• /
• 2014

절리면의 전단강도를 결정하는 중요한 인자로 알려진 암반 절리면의 거칠기는 여러 가지 방법에 의해 연구되어 왔다. 하지만, 거칠기를 구성하는 요소인 1차 거칠기와 2차 거칠기를 분리하여 거칠기를 평가하려는 시도는 매우 제한적으로 수행되고 있다. 본 연구에서는 인장절리 시험편을 이용하여 직접전단시험을 통해 2차 거칠기 요소를 파괴하고 이를 거칠기 파라미터를 이용하여 정량화 하였다. 거칠기 파라미터는 수직응력과 측정 간격이 증가할수록 감소하였으나, 1.5 MPa 이상의 수직응력에서는 일정한 경향을 나타내지 않았다. 또한 전단 반대방향의 거칠기 면적 감소율은 거칠기 파라미터가 증가할수록 감소하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제7권12호
• /
• pp.3037-3054
• /
• 2013

Interference between primary user (PU) and secondary user (SU) transceivers should be mitigated in order to implement underlay spectrum sharing in cognitive radio networks (CRN). Considering this scenario, an improved joint subcarrier and bit allocation scheme for cognitive user with primary users' cooperation (PU Coop) in CRN is proposed. In this scheme, the optimization problem is formulated to minimize the average interference power level at the PU receiver via PU Coop, which guarantees a higher primary signal to interference plus noise ratio (SINR) while maintaining the secondary user total rate constraint. The joint optimal scheme is separated into subcarrier allocation and bit assignment in each subcarrier via arith-metric geo-metric (AM-GM) inequality with asymptotical optimization solution. Moreover, the joint subcarrier and bit optimization scheme, which is evaluated by the available SU subcarriers and the allocated bits, is analyzed in the proposed PU Coop model. The performance of cognitive spectral efficiency and the average interference power level are investigated. Numerical analysis indicates that the SU's spectral efficiency increases significantly compared with the PU non-cooperation scenario. Moreover, the interference power level decreases dramatically for the proposed scheme compared with the traditional Hughes-Hartogs bit allocation scheme.

• 한국생산제조학회지
• /
• 제22권4호
• /
• pp.665-672
• /
• 2013

With the development of advanced processing technology, laser processing systems, which require high-quality precision processing, have attracted considerable attention. Although laser equipment is expensive, it enables quick processing and less deformation of materials. This technology is often applied to secondary batteries, which has thus farinvolved the use of argon tungsten inert gas (TIG) welding. However, the welding characteristics of argon TIG welding are not yet good, and a laser is used for welding to address this problem. In this study, lap-joint welding was conducted, and the desired welding characteristics were obtained when the laser power was 1800W and the laser beam travel speed was 1.8 m/min. Lap-joint welding was conducted on Ni-coated SS41. Two cases were compared. No pores were observed in the Ni-coated SS41 lap-joint welding part, and cracks appeared from the lap-joints. Moreover, the pole rod and tap were welded together in a T-joint form to improve the output of the secondary battery. T-joint laser welding showed better welding characteristics than TIG welding.

• Journal of Communications and Networks
• /
• 제16권2호
• /
• pp.140-145
• /
• 2014

In this paper, we propose an anti-interference cooperative spectrum sharing strategy for cognitive system, in which a secondary system can operate on the same spectrum of a primary system. Specifically, the primary system leases a fraction of its transmission time to the secondary system in exchange for cooperation to achieve the target rate. To gain access to the spectrum of the primary system, the secondary system needs to allocate a fraction of bandwidth to help forward the primary signal. As a reward, the secondary system can use the remaining bandwidth to transmit its own signal. The secondary system uses different bandwidth to transmit the primary and its own signal. Thus, there will be no interference felt at primary and secondary systems. We study the joint optimization of time and bandwidth allocation such that the transmission rate of the secondary system is maximized, while guaranteeing the primary system, as a higher priority, to achieve its target transmission rate. Numerical results show that the secondary system can gain significant improvement with the proposed strategy.

• Structural Engineering and Mechanics
• /
• 제65권6호
• /
• pp.741-750
• /
• 2018

The aim of this study was to investigate the mechanical responses of a high-speed railway shield tunnel subjected to impact by a derailed train, with emphasis on the protective effect of the secondary lining. To do so, the extended finite element method was used to develop two numerical models of a shield tunnel including joints and joint bolts, one with a cast-in-situ concrete secondary lining and one without such a lining. The dynamic responses of these models upon impact were analyzed, with particular focus on the distribution and propagation of cracks in the lining structures and the mechanical responses of the joint bolts. The numerical results showed that placing a secondary lining significantly constricted the development of cracking in the segmental lining upon the impact load caused by a derailed train, reduced the internal forces on the joint bolts, and enhanced the safety of the segmental lining structure. The outcomes of this study can provide a numerical reference for optimizing the design of shield tunnels under accidental impact loading conditions.

• 대한기계학회논문집A
• /
• 제36권12호
• /
• pp.1591-1597
• /
• 2012

복합재료 접합부의 접착강도에 대한 접착면 성질의 영향을 알아 보기 위해 불포화폴리에스테르, 우븐과 매트 유리섬유를 사용하여 복합재료 접합시편들을 제작하였다. 접착제, 복합재료 접착물, 말단접합과 이차접합 시편들의 기계적 성질을 실험에 의해 구하고 실험결과를 접합이론에 적용하였다. 6 개의 접합부들에서 발생하는 최대 및 평균 전단 응력은 최대 인장력과 접합 시편의 기하학적 변수들로부터 계산되었다. 실험 결과 접합면을 연마한 후 아세톤으로 처리한 경우가 말단접합의 3 가지 형태 중 가장 큰 강도를 가지고 있음이 관찰되었다. 마찬가지로 매트-매트와 매트-우븐 접합이 거의 같은 값으로 이차 접합의 3 가지 형태 중 가장 큰 강도를 가지고 있었다. 반대로 아무 처리도 하지 않은 접합시편과 우븐-우븐 접합시편은 매우 낮은 강도를 가졌다. 각각의 경우 파손은 접합부 양끝에서 심하게 발생하였고 접합부 가운데로 이동하였다.

• Journal of Oral Medicine and Pain
• /
• 제24권2호
• /
• pp.117-122
• /
• 1999

The author experienced a diagnosis of bilateral ankylosis of temporomandibular joint secondary to ankylosing spondylitis based on comprehensive data obtained from (1) clinical examination and (2) radiologic findings of irregular bone formation between articular fossa of temporal bone and mandibular condyle, narrowing and partial obscuring of the temporomandibular joint space in Korean male of 30-year-old.

• Composites Research
• /
• 제17권6호
• /
• pp.14-21
• /
• 2004

본 연구에서는 몇 가지 접합 방법에 따라 일방향 복합재료 단일 겹치기 접합 조인트의 파손 과정, 모드 및 강도를 실험적으로 평가하였다 접합 방법으로는 접착제 없는 동시성형, 접착제를 사용한 동시성형 및 이차 접합의 세 가지를 고려하였다 또한 이차 접합 조인트에서 몇 가지 파라미터의 영향도 살펴보았다. 접착제 없는 동시성형 시편은 가장 우수한 조인트 강도를 나타내었다. 이차접합 조인트에서는 접착제 층의 점진적인 파손이 발생하였다. 접착제의 재료 및 접합 강도가 상대적으로 강한 필름 접착제의 동시성형 조인트는 갑작스런 층간분리 파손이 발생하였으며 이차 접합 조인트보다 더 낮은 파손 강도를 나타내었다. 이차 집합 조인트에서 층간분리 파손이 발생하지 않은 것은 접착제 층에서의 균열 진전 및 점진적 파손이 층간분리 파손을 방지한 것으로 보인다. 따라서 복합재료 접합 조인트의 파손 강도는 접착제의 재료 강도 또는 접착 성능과 항상 비례하지 않으며 이것은 복합재료가 층간 분리 파손에 약하기 때문이다.

• 한국레이저가공학회지
• /
• 제16권3호
• /
• pp.11-21
• /
• 2013

As parts are becoming more complex and smaller with the development of new materials, high-quality laser precision processing is getting the limelight. Laser enables quick processing and less deformation of materials. It also enables welding with diverse materials. In this study, the pole rod and tap for the secondary battery were laser-welded using cross and coaxial nozzles. The results of the comparative analysis of cross and coaxial nozzles according to the processing parameters showed that the coaxial nozzle had more sensitive welding characteristic to the nozzle position or pressure than the cross nozzle. This indicated that the processing parameters should be carefully determined for the welding with the coaxial nozzle. The pole rod and tap were welded together in a form of T joint to improve the output of the secondary battery, and the cross nozzle had a better welding characteristic than the coaxial nozzle.