• 제목/요약/키워드: Section number

검색결과 1,732건 처리시간 0.029초

차체단면설계를 위한 단면계수법 및 단면형상법의 성능비교에 관한 연구 (A Study on the Comparison of Performances between Section Property Method and Section Shape Method for the Section Design of Vehicle Structure)

  • 서명원;이정환
    • 한국자동차공학회논문집
    • /
    • 제8권1호
    • /
    • pp.135-147
    • /
    • 2000
  • Section design of vehicle structure has been developed by two methods. One is the section property method which uses section property as a design variable. This method shows the tendency of an optimum section approximately. The other method is the section shape method which utilizes geometric parameter of section as a design variable. Practical solutions are obtained by this method. However, it is very expensive for large-scale problems due to the large number of geometric parameters. These two methods are compared through several sample problems. The finite element method is used for the structural and sensitivity analyses. The results are analyzed based on the number of function evaluations, the quality of cost function, the complexity of programing, and etc. The applications of both methods are also discussed.

  • PDF

제왕절개 분만율의 지역간 변이와 관련요인에 대한 연구 (Regional Variations in the Cesarean Section Rate and It's Determinants in Korea)

  • 김혜경;이정운;박강원;문옥륜
    • Journal of Preventive Medicine and Public Health
    • /
    • 제25권3호
    • /
    • pp.312-329
    • /
    • 1992
  • The purpose of this study is to estimate cesarean section rate in Korea and analyze the socioeconomic variables and health resources which affect regional variation in the rate. Samples were drawn from the record of vaginal and cesarean section deliveries based upon insurance claim bills which have been submitted to the National Federation of Medical Insurance for the first three months, January through March, 1991. The results are obtained as follows : It was found that. cesarean section rate was increasing rapidly up to 23.1% in 1991. Cesarean section per 10 thousand insured people was 4.8 and the number of cesarean section per 10 thousand insured eligible($15{\sim}49$ years old) female was 7.6. The fee for normal delivery was 109,489 won and that for cesarean section was 390,024 won. The average days of hospitalization in normal delivery was 2.3 days, and those in cesarean section was 7.6 days. On the average cesarean section has a longer of stay as much as by 4.3 days and cost 3.6 times more than normal deliveries. Cesarean section rates vary among medical facilities 19.8% at clinics 37.6% in small-scale hospitals, and 29.1% in general hospitals. The regional variation of cesarean section rates was also fairly prominent. The South Cheju Gun has the highest rate of cesarean section, 56.2%. Meanwhile no cesarean section cases has been reported in Sunchang Gun during the period of this study. The variation is noted among provinces. The rate for Cheju province has been 3.4 times higher than that for Chunnam. The number of cesarean section per 10 thousand insured people vary greatly among regions, too. This study has found that there exists significant regional variations among various geographic units in terms of average length of stay, average cost, number of obsretricians and number of beds. Multiple regression analysis was done to identify factors explaining the regional variance of various cesarean section rates : In the urban areas, no significant explaining variables were noted except the number of beds for the dependent variable of cesarean section cases per 10 thousand insured eligible females. The smaller the number of bed, the more cases of cesarean section was noted for an urban area. The is mostly because the rate of cesarean section is higher in medium-size hospitals than in large general hospitals. In the rural areas, the factor of education has been found significant for all three deplendent variables. The higher the educational level, the rate of cesarean section is most likely to rise. An income variable measured by the amount of monthly insurance contribution has been identified a powerful predictor in explaining the valiance of cesarean section rates. The same has been noted for the number of obstetricians. Similar findings are observed for the country as a whole. The income level has veen found as the most powerful explaining factor in the regional variance of cesarean section rates. In general the rate is higher in the urban areas, and lower in the area with more small hospitals. As this is the initial attempt to identify the factors relevant to the regional difference in the rates of cesarean section, more elaborated study is urgently required.

  • PDF

수도권 소재 산부인과의원의 제왕절개율과 관련 요인분석 (Factors Determining Cesarean Section Frequency Rates of the OBGY Clinics in Metropolitan Area)

  • 김윤미;고수경
    • 여성건강간호학회지
    • /
    • 제8권3호
    • /
    • pp.389-401
    • /
    • 2002
  • This study aims to find factors that affect variations in cesarean section frequency rates among OBGY clinics in Metropolitan areas. The factors include patient, medical supplier characteristics and economic factors. This study is a cross-sectional analysis using health insurance delivery claims from July to December 2000 and files of the NHIC(national health insurance corporation). Multiple regression was used to analyze the dependent variable of cesarean section frequency rate at each clinic. The results are as follows : Cesarean section frequency rate is increasing in proportion to the number of the following patients : repeated caesarean section, disproportion, obstructed labour, fetal distress, emergency caesarean section and self-employed patients. There are geographic variations as well. Cesarean section frequency rates are higher in Inchon and Gyonggi province than in Seoul. The higher number of total delivery the clinic has, the lower rate of cesarean section it has. Clinics with high frequency rates in 1999 showed higher rates the next year. Further research is required to develop evidence based delivery modes and change strategies for increasing normal delivery and activating midwife clinics.

  • PDF

Wind tunnel investigations on aerodynamics of a 2:1 rectangular section for various angles of wind incidence

  • Keerthana, M.;Harikrishna, P.
    • Wind and Structures
    • /
    • 제25권3호
    • /
    • pp.301-328
    • /
    • 2017
  • Multivariate fluctuating pressures acting on a 2:1 rectangular section (2-D) with dimensions of 9 cm by 4.5 cm has been studied using wind tunnel experiments under uniform and smooth flow condition for various angles of wind incidence. Based on the variation of mean pressure coefficient distributions along the circumference of the rectangular section with angle of wind incidence, and with the aid of skin friction coefficients, three distinct flow regimes with two transition regimes have been identified. Further, variations of mean drag and lift coefficients, Strouhal number with angles of wind incidence have been studied. The applicability of Universal Strouhal number based on vortex street similarity of wakes in bluff bodies to the 2:1 rectangular section has been studied for different angles of wind incidence. The spatio-temporal correlation features of the measured pressure data have been studied using Proper Orthogonal Decomposition (POD) technique. The contribution of individual POD modes to the aerodynamic force components, viz, drag and lift, have been studied. It has been demonstrated that individual POD modes can be associated to different physical phenomena, which contribute to the overall aerodynamic forces.

Effect of Repeated Public Releases on Cesarean Section Rates

  • Jang, Won-Mo;Eun, Sang-Jun;Lee, Chae-Eun;Kim, Yoon
    • Journal of Preventive Medicine and Public Health
    • /
    • 제44권1호
    • /
    • pp.2-8
    • /
    • 2011
  • Objectives: Public release of and feedback (here after public release) on institutional (clinics and hospitals) cesarean section rates has had the effect of reducing cesarean section rates. However, compared to the isolated intervention, there was scant evidence of the effect of repeated public releases (RPR) on cesarean section rates. The objectives of this study were to evaluate the effect of RPR for reducing cesarean section rates. Methods: From January 2003 to July 2007, the nationwide monthly institutional cesarean section rates data (1 951 303 deliveries at 1194 institutions) were analyzed. We used autoregressive integrated moving average (ARIMA) time-series intervention models to assess the effect of the RPR on cesarean section rates and ordinal logistic regression model to determine the characteristics of the change in cesarean section rates. Results: Among four RPR, we found that only the first one (August 29, 2005) decreased the cesarean section rate (by 0.81 percent) and continued to have an impact period through the last observation in May 2007. Baseline cesarean section rates (OR, 4.7; 95% CI, 3.1 to 7.1) and annual number of deliveries (OR, 2.8; 95% CI, 1.6 to 4.7) of institutions in the upper third of each category at before first intervention had a significant contribution to the decrease of cesarean section rates. Conclusions: We could not found the evidence that RPR has had the significant effect of reducing cesarean section rates. Institutions with upper baseline cesarean section rates and annual number of deliveries were more responsive to RPR.

이업종 교류회 기업 현장 안전관리 지원 현황 (A Study on the Interchanges of different Section of Industry)

  • 박노국
    • 대한안전경영과학회:학술대회논문집
    • /
    • 대한안전경영과학회 2006년도 춘계공동학술대회
    • /
    • pp.229-236
    • /
    • 2006
  • In the country, already a 400 species and some Interchanges of different Section of Industry have been organized and a number of related industry come to a 4000 species. In this study, we will be helpful to activity of Interchanges of different Section of Industry by concretely suggestion of the utility operation method of Interchanges of different Section of Industry in the many-sided point. But in the present, Interchanges of different Section of Industry stay at a form of a friendly society as yet.

  • PDF

지방산업 육성과 산업 클러스터 (A study on the Interchanges of different Section of Industry)

  • 박노국;황정희
    • 대한안전경영과학회:학술대회논문집
    • /
    • 대한안전경영과학회 2003년도 추계학술대회
    • /
    • pp.309-313
    • /
    • 2003
  • In the country, already a 400 species and some Interchanges of different Section of Industry have been organized and a number of related industry come to a 4000 species. But in the present, Interchanges of different Section of Industry stay at a form of a friendly society as yet. In this study, we will be helpful to activity of Interchanges of different Section of Industry by concretely suggestion of the utility operation method of Interchanges of different Section of Industry in the many-sided point.

  • PDF

CEO 대상 중소기업 이업종교류회 사례 (A Study on the Interchanges of different Section of Industry)

  • 박노국
    • 한국산업정보학회:학술대회논문집
    • /
    • 한국산업정보학회 2006년도 춘계 국제학술대회 논문집
    • /
    • pp.345-350
    • /
    • 2006
  • In the country, already a 400 species and some Interchanges of different Section of Industry have been organized and a number of related industry come to a 4000 species. In this study, we will be helpful to activity of Interchanges of different Section of Industry by concretely suggestion of the utility operation method of Interchanges of different Section of Industry in the many-sided point. But in the present, Interchanges of different Section of Industry stay at a form of a friendly society as yet.

  • PDF

지식경영을 활용한 이업종교류회 활성화 방안 (Interchanges of different Section of Industry Using Knowledge Management)

  • 박노국;이덕수
    • 대한안전경영과학회:학술대회논문집
    • /
    • 대한안전경영과학회 2002년도 춘계학술대회
    • /
    • pp.231-236
    • /
    • 2002
  • In the country, already a 400 species and some Interchanges of different Section of Industry have been organized and a number of related industry come to a 4000 species. But in the present, Interchanges of different Section of Industry stay at a form of a friendly society as yet. In this study, we will be helpful to activity of Interchanges of different Section of Industry by concretely suggestion of the utility operation method of Interchanges of different Section of Industry in the many-sided point.

  • PDF