• Structural Engineering and Mechanics
• /
• v.63 no.4
• /
• pp.567-574
• /
• 2017

Sedimentation tanks are essential structures to filter the suspended sediments in the inlet flow which are constructed at the inlet of the basins forked from rivers and irrigation canals. The larger the constructed tank, the better the sedimentation process is conducted. However, the construction and dredging costs increase. In this regard, improving the performance and sedimentation efficiency seem necessary by alternative methods. One of these effective methods is using baffle plates. Most of the studies carried out in this field are on the use of these baffles in the primary and secondary sedimentation tanks. Hence, this study is carrier out with the objective of increasing the retention efficiency in the irrigation sedimentation tanks using baffles. To reach this goal, the experiments were carried out in a flume with length 8 meters, width 0.3 meters, and height 0.5 meters, considering a sedimentation tanks with a length of 3 meters, in three different inlet concentration, three flow rates and three Froude numbers. The baffles were mounted at the bottom of the tank and the effects of the angle, height and position in the tanks were investigated. The results showed that on average, employing the baffles increased the sedimentation efficiency 5 to 6% and the highest value was obtained for angle 60 with respect to the flow direction. According to the results of this study, the most favorable height and position of these baffles were obtained to be in 40% of the depth of the flow and 50% of the length of the sedimentation tank, respectively. Also, by increasing the number of baffles, the sedimentation efficiency decreased. Regarding the sedimentation regions in this case, more than 80% of the settled sediments were observed in the middle of the tank measured from the inlet.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.03a
• /
• pp.1190-1197
• /
• 2009

Design parameters related to Yano's method(1984, 1985), one of experimental approaches having been used widely in Korea to estimate sedimentation and consolidation of dredged and reclaimed ground, were analyzed and their propriety were reassessed in this paper. Data analyses were performed on the basis of the settling test results using samples from the west coastal area of Korea. From analysis of results, for specific characteristics of these dredged and reclaimed marine soft clays, co-relations of initial water content - coefficient of sedimentation/ consolidation - initial setting velocity were evaluated. Relation between height of soil solid and surface height of slurry at the stages of initiation and termination of consolidation was also assessed. Finally ranges and average values of these design parameters were evaluated and typical empirical equations between these design parameters were also proposed.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.95-98
• /
• 2002

Three-dimensional flow analyses for two different ratios of radius to height of sedimentation bed are implemented to evaluate the effect of blockage ratio of center feed wall and angle of distributor on sedimentation efficiency, and to find the optimal value of those parameters. Sedimentation efficiencies for three different shapes are compared with and without rotation speed. And then, five different combinations of blockage ratio of center feed wall and angle of distributor are compared It reveals that the effect of blockage ratio of center fled wall and angle of distributor is considerable to sedimentation efficiency while rotation effect can be neglected and $0.55 and 33^{\circ}$for blockage ratio of center food wall and angle of distributor, respectively, ive the best sedimentation efficiency.

• Journal of Korean Society of Water and Wastewater
• /
• v.20 no.5
• /
• pp.667-676
• /
• 2006

This study was conducted to evaluate the effect of longitudinal baffle on hydrodynamic behavior within a certain full-scale sedimentation basin (flow rate per basin; $1,000m^3/d$). Comparative experimental investigations have been carried out on the sediment removal efficiencies and the sludge deposit distribution in the baffled and un-baffled sedimentation basin, respectively. From the results derived in the baffled and un-baffled sedimentation, the turbidity removal rate in the baffled sedimentation basin is about 38% higher than that in un-baffled. Also, the height of sludge deposit in the baffled sedimentation basin is approximately 20% lower, and the sludge concentration is 10% higher than those in un-baffled sedimentation basin. In order to explain the experimental results and investigate the effect of longitudinal baffle in more detail, we conducted Computational Fluid Dynamics (CFD) simulation. From the results of CFD simulation, the flow, especially in the near of outlet orifice, was more stable in the case of longitudinal baffled sedimentation basin than that in un-baffled basin. Also, it could be concluded that the longitudinal baffle made a fully developed flow more effective for sedimentation.

• The KSFM Journal of Fluid Machinery
• /
• v.7 no.6 s.27
• /
• pp.55-61
• /
• 2004

A numerical procedure for optimizing the shape of three-dimensional sedimentation tank is presented to maximize its sedimentation efficiency. The response surface based optimization is used as an optimization technique with Reynolds-averaged Navier-Stokes analysis for multi-phase flow. Standard $k-{\epsilon}$ model is used as a turbulence closure. Three design variables such as, tank height to center feed wall diameter ratio, blockage ratio of center feed wall and angle of distributor are chosen as design variables. Sedimentation efficiency is defined as an objective function. Full-factorial method is used to determine the training points as a means of design of experiment. Sensitivity of each design variable on the objective function has been evaluated. And, optimal values of the design variables have been obtained.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.58 no.6
• /
• pp.39-45
• /
• 2016

In this paper, analyzes the characteristics of self-weight consolidation on the dredged clay according to the fines content and falling height. Research was performed with the dredged clay sampled by Sae-mangeum field site. Classification of fines content was performed by sieve analysis test. After adjusting the fine content, self-weight consolidation tests were carried out focussing on the variation of fines content and falling heights. From the test results of the self-weight consolidation test, samples with high fines content had reached sedimentation completion more later than ones with less fine content samples. In other words, the start of self-weight consolidation was slowing down with increasing of fines content. Also, from the test results of calculating the coefficient of sedimentation consolidation, the coefficient value were increased with the fines content increases. In addition, the change of sedimentation ratio and volume ratio showed more higher changed value as the fine content increases. Thus, it is important to consider the fines content when estimate the settlement time of dredged soil in field dredge work.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.09a
• /
• pp.1147-1157
• /
• 2009

Recently this country has carried out the coast reclamation centering on the west and south coast for effective practical use of a country, considering purchase of materials and environmental problem, and carrying into effort the reclamation method after dredging the ground in the ocean. In this large scale ocean dredging reclaiming work, prediction the ground subsidence after reclaiming is very important for not only expense lose by overestimation or underestimation but also hereafter the best suited project establishment. this study carries out sedimentation and self weight consolidation in each cases and searches the features to analyze effect on kinds of soil of ground before dredging, abandonment height when it abandons momentary, void ratio, difference of abandonment height when it abandons by stages and difference of particle content of spoil.

• Journal of the Korean GEO-environmental Society
• /
• v.10 no.6
• /
• pp.89-98
• /
• 2009

In this research, settling tests with marine clays in Korea and extensive literature review were performed to investigate the characteristics of sedimentation and consolidation so that their behaviors during dredging and reclamating could be evaluated. Design parameters related to Yano's method (1985), one of experimental approaches having been used widely in Korea to estimate sedimentation and consolidation, were analyzed and their proprieties were reassessed. For samples from four different sites of south and west coasts in Korea respectively, settling tests with 1m height of columns were carried out, changing initial water content and height of sample in order to evaluate settling and consolidation characteristics of them from analyzing test results. More reliable regression curves than values from literature review were obtained as analyzing test results of estimating coefficient of sedimentation/ consolidation and initial setting velocity with changing initial water content. Relation between height of soil solid and surface height of slurry at the stages of initiation and termination of consolidation was also assessed. Finally, for marine clays of south and west coasts of Korea, ranges and average values of these design parameters were evaluated and typical empirical equations between these design parameters were also proposed. On the other hand, comparisons of characteristics of sedimentation and consolidation between marine clays from south coast and them from west coast were also performed.

• Korean Journal of Food Science and Technology
• /
• v.16 no.2
• /
• pp.223-227
• /
• 1984

Quality of flours of 166 different wheat varieties and breeding lines from the 1980-1982 year crop was evaluated with Mixograph. Protein content had a correlation coefficient of 0.68 with sedimentation value and of 0.67 with bread volume. Sedimentation value showed highly significant correlation (r = 0.74) with bread volume. Positive significant correlations were found between protein content and sedimentation value vs. Mixography water-absorption, however the protein content and sedimentation value were not consistently related with mixing time or height to peak. Mixograph curve of the flour in a cultivar showed the specific pattern regardless the environmental conditions.

• Geomechanics and Engineering
• /
• v.33 no.2
• /
• pp.121-131
• /
• 2023

Clay sedimentation has been widely analyzed for its application in a variety of geotechnical constructions such as mine tailing, artificial islands, dredging, and reclamation. Chemical flocculants such as aluminum sulfate (Al₂(SO₄)₃), ferric chloride (FeCl₃), and ferric sulfate (Fe(SO₄)₃), have been adopted to accelerate the settling behaviors of clays. As an alternative clay flocculant with natural origin, this study investigated the settling of xanthan gum-treated kaolinite suspension in deionized water. The sedimentation of kaolinite in solutions of xanthan gum biopolymer (0%, 0.1%, 0.5%, 1.0%, and 2.0% in a clay mass) was measured until the sediment height was stabilized. Kaolinite was aggregated by xanthan gum via a direct electrical interaction between the negatively charged xanthan gum molecules and positively charged edge surface and via hydrogen bonding with kaolinite particles. The results revealed that the xanthan gum initially bound kaolinite aggregates, thereby forming larger floc sizes. Owing to their greater floc size, the aggregated kaolinite flocs induced by xanthan gum settled faster than the untreated kaolinite. Additionally, X-ray computed tomography images collected at various depths from the bottom demonstrated that the xanthan gum-induced aggregation resulted in denser sediment deposition. The findings of this study could inspire further efforts to accelerate the settling of kaolinite clays by adding xanthan gum.