• Journal of Fashion Business
• /
• v.6 no.4
• /
• pp.151-162
• /
• 2002

This study aims to reveal the effects of shoe size room on the inner environment of shoes by examining the changes of footskin temperature, temperature and humidity of the shoes, and psychological responses. The following conclusions were made: 1. Skin temperature had significant differences according to shoe sizes in the inner foot parts (right/left) and the outer foot part (left). As time went, skin temperature was distributed as follows: Type A > Type C > Type B. 2. Skin temperature appeared in the following order: instep > inner foot > outer foot. 3. The temperature within the shoes had significant differences: Type A > Type C > Type B. But no significance was recognized in the humidity within the shoes: Type B > Type C > Type A. 4. Some significance was noticed in the psychological responses of size fitness and comfortableness. In size fitness, Type B was responded to be fitting, Type A little small, and Type C rather big. Moisture had similar changes according to three shoe sizes, but humid was the response as time went. Comfortableness appeared in the order of Type C > Type B > Type A.

• Korean Journal of Applied Biomechanics
• /
• v.27 no.3
• /
• pp.219-227
• /
• 2017

Objective: The aim of this study was to analyze the effects of bobsleigh shoes on the lower extremity range of motion and start speed lap time and to develop bobsleigh shoes suitable for winter environments and Korean players based on sports science and optimized biomechanical performance. Background: The bobsleigh shoes used in the start section of the sport are one of the most important equipment for improving athletes' performances. Despite the importance of the start section, there are no shoes that are specifically designed for Korean bobsleigh athletes. Thus, Korean athletes have to wear sprint spike shoes instead of bobsleigh shoes to practice the start. Method: The subjects included four bobsleigh athletes from the Gangwon Province Bobsleigh Skeleton Federation. The study selected the bobsleigh shoe type A (company A) and type B (company B). We analyzed the lower extremity range of motion and sprint time (start line to 10 m) using a Motion Analysis System (USA). Results: In the measurement of the time required for the bobsleigh start section (10 m), the type A shoes demonstrated the fastest section record by $2.765{\pm}0.086sec$ and yielded more efficient movements, hip and knee flexion, hip extension, ankle dorsiflexion, plantar flexion, and inversion than the type B shoes. Conclusion: Type A shoes can yield a better performance via effective lower extremity movements in the bobsleigh start section. Application: In the future, functional analysis should be conducted by comparing the upper material properties, comfort, and muscle fatigue of bobsleigh shoes based on the Type A shoes to develop such shoes suitable for Koreans.

• Journal of the Korean Home Economics Association
• /
• v.40 no.10
• /
• pp.231-241
• /
• 2002

This study is for research of relationship between shoes wearing by adult woman and foot type. The research was made through questionnaire sheets of general matters (age, body weight, height & occupation) and shoes wearing status (hill height, toe shape, wearing time) of 216 adult women reside in the metropolitan zone and the foot type was classified from foot measurement and the relationship between shoes wearing and foot type was analyzed. According to the result of analysis it is as follows : 1) In the shoes type prefer for they prefer for lower hill as more ages and were preferring shoes with higher hill as the taller women. 2) The instep height is lower and medial foot angle was increased as their ages are more. Majority of foot type was appeared with standard type and the broad type was indicated more by age of 20s. The classification by toe the square type was indicated by majority and in the age of 30-40s the egyptian type was more 3) As the age and weight get increased he height of arch become lower and indicated to transit to flat-foot. That is to say they prefer for round toe in case of fiat-foot, and for square toe in case of normal and, choice of shoe toe shape it indicated by more impact by the height of arch rather than toe length.

• Korean Journal of Applied Biomechanics
• /
• v.25 no.4
• /
• pp.465-474
• /
• 2015

Objective : A study and development of Korean Bobsleigh athletes's shoe which considers their physical condition has yet to be completed. So this study examines the effects of running shoes used by athletes based on plantar pressure and sprint time in order to provide raw data for the development of bobsleigh shoes suitable for Koreans. Method : The study selected seven bobsleigh athletes as subjects and selected three pairs of spiked running shoes from three companies, which will be referred to as Company N (Type A), Company A (Type B), and Company M (Type C). To analyze sprint time and plantar pressure for each shoe, the subject of the study were instructed to wear the selected shoes and to drag a sled at maximum sprint for 15 meters for 15 meters for in each condition that would be in real bobsleigh competitions. Results : The average sprint intervals for each athlete in each pair of shoes revealed Type C produce the fastest sprint in the order of Type C < Type A< Type B. Shoe Type C also had the largest contact area in order of Type C > Type B > Type A (p<.01). None of the three shoe types seem to yield a distinct advantage in terms of maximum average pressure or maximum pressure. Conclusion : In the future, functional analysis should be carried out by comparing the material properties, hardness, and toe spring of shoes based on the Type C shoe from Company M in order to develop bobsleigh shoes suitable for Koreans.

• Journal of the Korean Society of Physical Medicine
• /
• v.4 no.2
• /
• pp.63-71
• /
• 2009

Purpose：The purpose of this study was to investigate how much the type of footwear affects these preference and wearing conditions in older women. Methods：Two hundred eight women aged $60{\sim}87$ years were recruited from the elder's College and welfare center in Daegu. Each subject performed questionnaire surveys. Chi-square($X^{-2}$) test was used to compare the outcome for differences of age, weight, height, heel height and footwear size. SPSS 12.0 program was used in this study. Results：The type of their possessive shoes were casual shoes (24.8%), running shoes (20.1%) and dress shoes (16%) etc. The type of their short-distance outdoor shoes were casual shoes (32.1%), running shoes (31.4%) etc. The type of their long-distance outdoor shoes were platform shoes (40.3%), dress shoes (31%) etc. Conclusion：The heel height of platform shoes had no relation with demographic factors (age, weight, height), but the size of platform shoes had relation with demographic factors such as age and height except for weight(p<0.05).

• Journal of the Korea Fashion and Costume Design Association
• /
• v.19 no.4
• /
• pp.93-104
• /
• 2017

This study is a basic study to develop shoe last design technology to enhance and revitalize the competitiveness of the handmade shoes. In-depth interviews were conducted with four manufacturers in Seongsu-dong to identify the production status and design technology of shoe lasts. The result of the research is as follows. Firstly, shoe lasts for adults are produced at intervals of 5mm between 245mm-285mm for men's shoes, and between 220-260mm for women's shoes. The production rate of women's shoes was high in the order of general type, boot type, and sandal type while men's shoes mainly produce general type. Secondly, the master last size and ball girth rating for men's and women's shoes were analyzed to EE-EEE grade at 260mm and D grade at 235mm. The length of the master last for men's shoes is 276-290mm, the heel width is 60-65mm, the ball width is 88-90mm, the ball girth is 250mm, and the waist girth is 248mm. The length of the master shoe last for women's shoes is 236-245 mm, the heel width is 50-55mm, the ball width is 78-80mm, the ball girth is 211~213mm, and the waist girth is 213~215mm. Thirdly, the last grading deviation is 5mm in length, the heel width is 0.5mm, the ball girth is 3.5mm, and the ball with is 1.2mm. The ball girth dimensions of Oxford type, slip-on type, and sneakers type are made at 250mm, 248mm, and 245mm for men's shoes. For women's shoes, the ball girth dimensions of pump type, loafer & boot type, and sandal type are made at 211~213mm, 214~215mm, and 211mm. Fourthly, t+he construction of the automation system is insufficient and almost completely depends on manual production.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.43 no.2
• /
• pp.39-47
• /
• 2020

Postural stability can reduce the likelihood of critical slip and fall accidents in workplaces. The present study aimed to analyze the effect of shoes type on the ability of postural control during quiet standing. The effect of workload on the body balance was also of primary concern. Thirteen healthy male undergraduate students participated voluntarily in the experimental study. Standing on a force plate with wearing slippers, sports shoes, or safety shoes, two-axis coordinate on subjects' center of pressures (COP) was obtained in the two levels, rest and workload. For the workload level, subjects performed treadmill exercise to reach the predetermined level of physical workload. By converting the position coordinates of COPs, the postural sway length in both anterior-posterior (AP) axis and medio-lateral (ML) axis was assessed. ANOVA results showed that, in AP direction, wearing slippers significantly increased the postural sway length compared to wearing sports shoes or safety shoes. No significant difference in the mean sway length in AP axis was observed between sports shoes and safety shoes. In ML direction, both the workload and the shoes type did not significantly affect the mean length of postural sway. However, the postural sway length increased marginally with the slippers especially during the workload condition. This study explains wearing slippers may interfere with the ability of postural control during quiet standing. Physical workload decreases the ability of postural stability further.

• Journal of the Korean Society of Safety
• /
• v.23 no.1
• /
• pp.35-45
• /
• 2008

This study was performed to compare the kinematics among three different safety shoes(type 1: ergonomically designed and high quality shoes, 2: curved and cushioned safety shoes, and 3: regular safety shoes) and to find the effect of insole during walking. Ten healthy subjects were recruited for this study. The range of motion of knee and ankle joint, angle of rear foot and angle of heel contact were measured using a three dimensional motion analysis system. In the second peak, the angle of heel contact showed statistically significant difference between safety shoes and insole, however, there was no statistical significance among three different safety shoes. The angle of ankle increased significantly at initial contact, first peak, the second peak and the toe off phase compared with type 1 and 2 safety shoes, and the angle of ankle showed statistically significant difference between with and without applying the insole. During the first peak, the second peak and the toe off phase, the angle of knee was statistical significance between safety shoes and insole. In heel contact, the angles of Achilles' tendon showed statistically significant difference between safety shoes and insole. The rear foot angles showed statistically significant difference between safety shoes and insole during heel contact and early heel contact. These results suggest that the type 1 safety shoes were superior to others in the statistics, and applying insole could be a possible method to prevent fatigue of lower extremity and musculoskeletal disorders. Further studies are needed to find the effect of ergonomically designed safety shoes and insole on practical value in prevention of musculoskeletal disorder, fatigue and satisfaction of workers.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.20 no.4
• /
• pp.117-130
• /
• 2018

As women wear shoes for a long time due to aesthetic elements and working environment, many women experience discomfort and deformation in their feet due to their shoes and the production of comfortable shoes is becoming an important issue. The purpose of this study is to investigate the factors affecting the grip of shoes by foot type, shoe design, and wearing attitude of shoes. Through this, we suggest solutions for foot discomfort due to wearing shoes and help to prevent foot related diseases. The study results are as follows; first, a wide foot, square-type, and high or low arch (hollow foot or flat foot) among foot shapes influenced the fatigue and pain of feet, and big feet over 250mm-long, wide feet, square-type feet, and high-arch feet (hollow foot) had an influence on distortion and side effects. Second, among the characteristics of wearing shoes influencing foot discomfort, the higher the shoe heels were, the narrower the surface covering the feet was (pumps and mule), and the shoes with high front heels and narrow back heel area, the shoe wearer had a higher possibility of experiencing fatigue and pain and even had not only fatigue and pain but also side effects when she wore pointed shoes. Third, a shoe wearer experiences fatigue and pain if she wears shoes for a shorter period of time, stay stood while wearing shoes for a short time, and wears shoes that are bigger or smaller than the actual shoe size. Fourth, fatigue and pain experiencers and distortion and side effects experiencers all responded that they change into other shoes to deal with foot discomfort and that they directly massage their feet.

• Korean Journal of Applied Biomechanics
• /
• v.17 no.3
• /
• pp.189-195
• /
• 2007

The purpose of this study was to analyze the effects of shoes with curved out-sole on the pressure, reaction force(sum of pressure) on foot and relations between the rolling speeds and pronation of foot. The foot pressure, reaction force and pressure center on the foot surface of shoe were measured with NOVEL padar system, and 3 type shoes were used to compare the position and speed of pressure center and the foot reaction force, which were s(target) shoe with soft cushions in middle part of out-sole and curved out-sole, m shoes with two type- soft, hard, hardness out-sole and curved out-sole and n shoes with flat out-sole. The subjects were 13 female university students, had weared the 3 type shoes for 6 weeks on two-weeks shifts for adaptation before experiment and put on 3-type shoes repeatedly and randomly and walked on treadmill with 3.5km/h and 80 steps/min. The data were captured with 30Hz and readjusted with 5kgf threshold reaction force. The results can be summarized as follow. 1. There were no difference in maximum reaction force on initial contact period and total foot impact, but statistical difference in maximum reaction force on takeoff period : s, m, n in ascending order. 2. There were some difference in rolling speeds for support periods. At initial contact, the rolling speed of s shoes was fastest but at periods between first and second maximum reaction force, that of m shoes fastest. 3. There was a negative relation between rolling speeds and the length of lever arm on initial reaction force related to pronation. It seems shoes with various curved shapes and hardness could make effects on the rolling features and the rolling speed also have some relationships with walking efficiency, absortion of impact and pronation.