• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.30 no.4
• /
• pp.195-203
• /
• 2018

Mohair is widely used as an airtight material for filling the gap between a window frame and sash. The purpose of this study is to investigate infiltration rate and opening force of sliding windows according to the mohair installation conditions. Infiltration experimental apparatus was set up, and the experimental results were applied to windows to find a correlation between infiltration rates and opening forces. When 4 rows of mohair were installed, the infiltration rate increase became 27.1% per clearance length increase of 1 mm, and the infiltration rate decrease became 5.7% per shortened length increase of 0.1 mm. For 4 rows of mohair, the opening force decreased by 28.2% as the clearance increased by 1 mm, and it increased by 9.3% as the shortened length increased by 0.1 mm.

• Journal of Korean Physical Therapy Science
• /
• v.29 no.2
• /
• pp.14-19
• /
• 2022

Background: Plank exercise (PE) is an effective exercise to enhance lower back stability by strengthening the core and lower limb muscles. However, in patients with a shortened hamstring muscle (HAM), PE may cause abnormal movement of the pelvis and lower back due to HAM hyperactivity. Therefore, the objective of this study was to investigate the effects of PE on the core muscles and HAM in subjects with a shortened HAM. Design: Cross-sectional study. Methods: Subjects were divided into a normal length of HAM group (NHG; 9 subjects) and a shortened length of HAM group (SHG; 14 subjects). The activities of the erector spinae (ES), rectus abdominis (RA), external oblique (EO), and HAM muscles were measured using surface electromyography. Results: The results showed that RA, EO, and ES muscle activities were higher in the NHG than in the SHG; however, no significant differences were detected. Conclusion: HAM activity was significantly higher in the SHG than in the NHG. In subjects with a shortened HAM, PE may hyperactivate the HAM, adversely affecting the pelvis and lower back.

• The korean journal of orthodontics
• /
• v.31 no.1 s.84
• /
• pp.25-38
• /
• 2001

The purpose of this study was to compare the force, the displacement and the stress distribution on the maxillary first molars altered by the application of various asymmetric head-gear. For this study, the finite element models of unilateral Cl II maxillary dental arch was made. Also, the finite element models of asymmetric face-bow was made. Three types of asymmetric face-bow were made : each of the right side 15mm, 25mm and 35mm shorter than the left side. We compared the forces, the displacement and the distribution of stress that were generated by application of various asymmetric head-gear, The results were as follows. 1. The total forces that both maxillary first molars received were similar in all groups. But the forces that mesially positioned tooth received were increased as the length of the outer-bow shortened, and the forces that normally positioned tooth received were decreased as the length of the outer-bow shortened. 2. In lateral force comparison, the buccal forces that normally positioned tooth received were increased as the length of the outer-bow shortened, and the buccal fortes that mesially positioned tooth received were decreased as the length of the outer-bow shortened. Though the net lateral force moved to the buccal side of normally positioned tooth as the length of the outer-bow shortened, both maxillary first molars received the buccal force. That showed 'Avchiai Expansion Effect' 3. The distal forces, the extrusion forces and the magnitudes of the crown distal tipping that mesially positioned tooth received were increased as the length of the outer-bow shortened, and the forces that normally positioned tooth received were decreased as the length of the outer-bow was shortened. 4. The magnitude of the distal-in rotation that normally positioned tooth received were increased as the length of the outer-bow was shortened. But, mesially positioned tooth show two different results. For the outer-bow 15mm shortened, mesially positioned tooth showed the distal-in rotation, hut for the outer-bow 25mm and 35mn shortened, mesially positioned tooth showed the distal-out rotation. Thus, the turning point exists between 15mm and 25mm. 5. This study of the initial stress distribution of the periodontal ligament at slightly inferior of the furcation area revealed that the compressive stress in the distobuccal root of the normally positioned tooth moved from the palatal side to the distal side and the buccal side successively as the length of the outer-bow shortened. 6. This study of the initial stress distribution of the periodontal ligament at slightly inferior of the furcation area revealed that the magnitudes of stress were altered but the total stress distributions were not altered in the mesiobuccal root and the palatal root of normally positioned tooth, and also three roots of mesially positioned tooth as the length of the outer-bow shortened.

• Proceedings of the KIEE Conference
• /
• 1997.11a
• /
• pp.13-15
• /
• 1997

Outer rotor type motors used in washing machines has some merits compared with ordinary rotor type motors. For example, the washing mchines' length can be shortened and stator coil length can be shortened.

• Journal of Veterinary Clinics
• /
• v.14 no.2
• /
• pp.223-229
• /
• 1997

This study was carried out to determine the effect of uterus shortening on the pvaries, the length of uterine horn and the recovery of embryos. The length of the shortened uterine horns increased more in part of uterine tip from connecting part for shortening than in base (P<0.05), and collection of embryos was also difficult in gilts because of its narrow pelvis. The embryos collected surgically from gilts with shortened uterine horns were developed into 2~8cells (87.5%) 3days and 4cell~morula (88.9%) 5days after mating.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.11 no.1
• /
• pp.34-41
• /
• 2001

Passive samplers have been used for personal, indoor, and outdoor air monitoring of VOCs at ppb concentrations in community and office environments. The path length of modified passive sampler was shortened, so it was intended to increase an uptake rate. The performance of the modified 3M 3500 organic vapor monitor(OVM) as a tool for assessing exposures to toxic air pollutants in nonoccupational community environments was evaluated using combined controlled test atmospheres of six selected target volatile organic compounds(VOCs): benzene, methyl tert-butyl ether(MTBE), chloroform, 1,4-dichlorobenzene, tetrachloroethylene, and toluene. The experiments were conducted by exposing the dosimeters to concentrations of $50{\sim}100{\mu}g/m^3$ on six face velocity(0.00, 0.02, 0.06, 0.12, 0.20, 0.30 m/sec) for 24 hours. If the uptake rate was increased, that means that we could use the passive sampler more effectively. The uptake rates were increased linearly according to reduce the path length. Although the diffusion path length was shortened, the change of uptake rate was within ${\pm}25%$ of theoretical value, indicating that the modified passive sampler(TM) can be effectively used over the range of concentrations and environmental conditions tested with a 24-h sampling period if the face velocities were over 0.12 m/s for 6 components of VOCs. But when the face velocities were less than 0.12 m/s, uptake rates were reduced more than expected values. So, the passive sampler with the shortened path length should be used at indoor or outdoor environment where the face velocity should be over about 0.10 m/s. If the path length was shortened more, the uptake rate was more effected by starvation.

• PNF and Movement
• /
• v.18 no.3
• /
• pp.375-382
• /
• 2020

Purpose: The purpose of this study was to investigate the muscle contraction onset time characteristics of the gluteus maximus, semitendinosus, and biceps femoris muscles at different knee flexion angles in individuals with shortened or over-lengthened hamstrings performing prone hip extension. Methods: Twenty-six participants were divided into a hamstring shortened group (n = 12) and hamstring lengthened group (n = 14). Wireless surface electromyography was used to verify the muscle onset time of the gluteus maximus, semitendinosus, and biceps femoris when performing prone hip extension at different knee flexion angles. Results: There were significant differences in the muscle onset times of the semitendinosus and biceps femoris between the hamstring shortened group and hamstring lengthened group (p < 0.05). In addition, there was a significant difference in the muscle contraction onset times among of the gluteus maximus, semitendinosus, and biceps femoris muscles when performing prone hip extension at a knee flexion of 90° in the hamstring shortened group (p < 0.05) and a knee flexion angle of 0° in the hamstring lengthened group (p < 0.05). Conclusion: In all groups, there was no effect on the onset time of the gluteus maximus muscle according based on the knee angle. In addition, the knee flexion angles affected the onset time of the muscle contraction of the gluteus maximus muscle in the hamstring shortened group and hamstring lengthened group with an abnormal length of the hamstring muscle.

• Journal of The Korean Society of Integrative Medicine
• /
• v.1 no.4
• /
• pp.85-92
• /
• 2013

PURPOSE : The purpose of this study was to determine the effects of the length of the pectoralis minor on muscle activity of trapezius and pectoralis major in subjects in subjects with shortened pectoralis minor muscle. METHOD : The subjects was participated in 36 with shortened pectoralis minor muscle. All subjects was examined the length test of pectoralis minor muscle. we divided by 3 groups. group I(n=12) was for 4~5cm of length of pectoralis minor muscle, group II(n=12) was for 5~6cm, group III(n=12) was for above 6cm. The EMG activity of upper trapezius, middle trapezius, lower trapezius and pectoralis major muscle activity was measured by surface EMG while elevationg the right arm in sitting postion with head to the neutral, shoulder elevation $135^{\circ}$ with scaption. Data were analyed using one-way ANOVA with a Tukey post hoc test. RESULT : The EMG activity differed significantly among the three groups(p<.05). The group III had significantly greater EMG activity of upper trapezius and pectoralis major muscles than group I and II(p<.05). Also, The group III had significantly smaller EMG activity of lower trapezius muscle than group I and II(p<.05). But, these was no significant difference in the EMG activity of the middle trapezius muscle among the groups (p.05). CONCLUSION : Therefore, the result of this study should be suggested that the shortened pectoralis minor muscle was affected the EMG activity of the upper trapezius, lower trapezius and pectoralis major. Ultimately the length of the pectoralis minor muscle leads to the muscle imbalance in shoulder girdle.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.49 no.1
• /
• pp.25-34
• /
• 2012

This paper presents a universal architecture for variable-length eight-parallel Reed-Solomon (RS) decoder for high-rate WPAN systems. The proposed architecture can support not only RS(255,239) code but various shortened RS codes. Moreover, variable-length architecture provides variable low latency for various shortened RS codes and the eight-parallel design also provides high data processing rate. Using 90-$nm$ CMOS standard cell technology, the proposed RS decoder has been synthesized and measured for performance. The proposed RS decoder can provide a maximum 19-$Gbps$ data rate at clock frequency 300 $MHz$.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.26 no.5
• /
• pp.11-23
• /
• 2022

For the design of the shortened ED(Expansion Deflection) nozzle, a numerical study of ED nozzle was performed according to the length reduction methods. The first method is to reduce the extension length of the ED nozzle with 80% bell nozzle length by 10%, 20% and 30%. The second method is to shorten the extension length by increasing the nozzle throat angle. Due to the increase in the curvature of the contour as the length shortened, the decrease in the nozzle exit velocity between the ED nozzle with 80% bell nozzle length and the ED nozzle in the first method was reduced, and the thrust become similar. The ED nozzle of the second method increased the thrust by increasing the nozzle exit velocity compared to the ED nozzle with 80% bell nozzle length.