• Journal of Korean Society of Water and Wastewater
• /
• v.22 no.1
• /
• pp.3-14
• /
• 2008

ASM No. 2(Activated sludge model No. 2) is very useful model to analyze the wastewater treatment which removes nitrogen and phosphorus. But, it is difficult to apply ASM No. 2 to control of wastewater treatment since it has 17 material divisions and 46 parameters. So the purpose of this study was the simplification of ASM No. 2 and the provement of simplification model. Firstly ASM No. 2 was simplified with 5 material division and three phases(Anaerobic, aerobic, anoxic phases). The simplified model was proved by R-square using track study data. As a result of provement, the values of R-square in ${NH_4}^+$ were 0.9815 in ASM No. 2 and 0.9250 in simplified model and in ${NO_3}^-$ were 0.8679 in ASM No. 2 and 0.7914 in simplified model and in ${PO_4}^{3-}$ are 0.9745 in ASM No. 2 and 0.9187 in the simplified model when the ability to express the material variation was compared by R-square. So, the simplified model has enough ability to express the variation of ${NH_4}^+$, ${NO_3}^-$ and ${PO_4}^{3-}$.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.1
• /
• pp.173-178
• /
• 2012

The quantity bill writing of organized electrical construction can be an effective to quality and process management in the construction. Therefore, in order to overcome confusion of the construction and doing an effective work, the clearly quantity bill writing is need. This paper is a focused to solve a problem of existing quantity bill as the difference in terms of work section and item information, regulatory information of ordering authority. Therefore, a terms of work section and item information, regulatory information of ordering authority has been normalized. Moreover, basic data of simplification for quantity bill writing and structure has been guaranteed.

• Nuclear Engineering and Technology
• /
• v.51 no.5
• /
• pp.1333-1344
• /
• 2019

An integrated approach of model simplification for high burnup spent nuclear fuel is proposed based on material calibration using optimization. The spent fuel rods are simplified into a beam with a homogenous isotropic material. The proposed approach of model simplification is applied to fuel rods with two kinds of interfacial configurations between the fuel pellets and cladding. The differences among the generated models and the effects of interfacial bonding efficiency are discussed. The strategy of model simplification adopted in this work is to force the simplified beam model of spent fuel rods to possess the same compliance and failure characteristics under critical loads as those that result in the failure of detailed fuel rod models. It is envisioned that the simplified model would enable the assessment of fuel rod failure through an assembly-level analysis, without resorting to a refined model for an individual fuel rod. The effective material properties of the simplified beam model were successfully identified using the integrated optimization process. The feasibility of using the developed simplified beam models in dynamic impact simulations for a horizontal drop condition is examined, and discussions are provided.

• Journal of Korean Society of Water and Wastewater
• /
• v.21 no.4
• /
• pp.409-420
• /
• 2007

ASM No. 1 is a very useful model to analyze wastewater treatment system removing organic carbon and nitrogen material. But it isn't adequate to control the wastewater treatment system with real time since it has many material divisions and parameters. So, the purpose of this study is the simplification of ASM No. 1 to control the wastewater treatment system. ASM No. 1 was changed with the model which has 3 material divisions(COD, $NH_4{^+}$, $NO_3{^-}$) and two phases(Aerobic and Anoxic condition). SBR was running with two phases(Phase I and II). Phase II running 20 minutes with aerobic time was used for deciding model parameters and Phase I running 12 minutes with aerobic time was used for proving the simplified model. The simplified model was compared with ASM No. 1 using data of Phase I and II. As a result of model comparison, the simplified model has enough ability to express the variation of $NH_4{^+}$ compound.

• Air Cleaning Technology
• /
• v.18 no.1 s.68
• /
• pp.53-78
• /
• 2005

Construction work is an art of making something out of nothing. To run the construction project smoothly, budget, organization and engineering should be balanced. Standardization and simplification of construction bill are needed in order to maximize the

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.199-199
• /
• 2010

A back-gated MOSFET on silicon-on-insulator (SOI) substrate for pH sensor was investigated. We used concentrations of pH solution from 6 to 9. The fabricated back-gated MOSFET has current difference and threshold voltage shift by pH concentrations. Therefore, It can be used to simplification of conventional pH sensor.

• The Research Journal of the Costume Culture
• /
• v.12 no.4
• /
• pp.497-510
• /
• 2004

This research shows problems of modem Mourning Garments used in Gwangju area compared to traditional ones. Researches are as fellowed; First, items of mourning garments have been not used by degrees. Male has worn Jung-Dan and Du-ru-mak-i as Pyo-Eui of male mourning garments. Second, mourning garments have been simplified and modified. These simplification in shape and uniformity in size are only far Mass production and convenient manufacture. Third, modem mourning garments are made of 6-su (thin) Hemp cloth. In fact this material has no hemp and is just made of cotton and chemical textiles. Even though it is not made of hemp, it has been sold with the name of Hemp Cloth. Materials should be clearly listed. Forth, traditional mourning garments are manufactured through needlework while modern ones through mass production. Now the former is expensive rather than the latter. So Mass produced garments would be preferred to traditional made ones.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.2059-2063
• /
• 2004

Most power plants have operated many independent computerize systems for maintenance. Independence of systems have caused complexity of business process and inconvenience of computer system management. Because the equipment and material master data is not standardize and structurize, it is difficult to manage equipment maintenance history and material delivery. Especially equipment classification criterion is important for standardization of every maintenance information. It is necessary to integrate function of independent systems for business process simplification and rapid work flow. this paper provides equipment classification criterion design and system integration method with the case of live system development.

• Clean Technology
• /
• v.19 no.2
• /
• pp.173-183
• /
• 2013

A various methodologies like eco product design, recycling, remanufacturing have been proposed for the increase of resource recirculation and energy saving worldwide. Uni-materialization in this paper, one of measures is presented. Uni-materialization is defined as the unification or simplification of material that is easy resource recycling and reduce waste generation at source during product design, manufacturing, delivery, use and disposal. This study developed calculates the qualitative and quantitative of assessment index for evaluating target products applicable uni-materialization. There are 9 assessment articles considered economic performance, technological property and environmental property and a study on target product applied assessment indexes. As a result it is possible for 3 target products to apply uni-materialization product except for a window blind, and the concrete concept of uni-materialization for improving objectivity of assessment index and the consideration of industrial distinct character are needed.

• Composites Research
• /
• v.27 no.1
• /
• pp.1-6
• /
• 2014

Theories for composite material structures are too difficult for such design engineers for construction and some simple but accurate enough methods are necessary. The author has reported that some laminate orientations have decreasing values of $D_{16}$, $B_{16}$, $D_{26}$ and $B_{26}$ stiffnesses as the ply number increases. For such plates, the fiber orientations given above behave as specially orthotropic plates and simple formulas developed by the author. Most of the bridge deck structures on girders have large aspect ratios. For such cases further simplification is possible by neglecting the effect of the longitudinal moment terms $M_x$ on the relevant partial differential equations of equilibrium. In this paper, the result of the study on the subject problem is presented.