• Journal of the Korea Fashion and Costume Design Association
• /
• v.18 no.1
• /
• pp.191-203
• /
• 2016

The 3D virtual fitting system is a new and very efficient system replacing real fitting in apparel industry and on-line shopping. It is a win-win system for both of consumer and manufacturer which not only reduces design and production time but also resolves consumer's complaints by checking the wearing image beforehand. It is a must-have item in the future. The purpose of this study is to analyze sizing menu, terms, and current status and to figure out problems of avatar sizing programs which substitute human bodies in virtual fitting. We chose three existing outstanding programs in domestic and global market, compared and analyzed the program, manual, and terms that are used in avatar sizing, and investigated the strengths, weaknesses, problems of options and terms and finally suggested an alternative terms. The revealed problems are as follows: each program supports various avatars ranging from male to female, from child to adult, and from oriental style to western style. The image of the avatar could be changed through the options for hair style, shoes and accessories. But we found out some problems. The avatar body types are far from actual human body types, avatar sizing menus and item terms are different from program to program, and terms not yet standardized. Cooperative efforts of industry and academy on standardization of sizing menus and terms should be emphasized for the virtual fitting system to be widely used like the other computer graphic programs or word editors.

• Computers and Concrete
• /
• v.11 no.3
• /
• pp.253-270
• /
• 2013

The aim of the present paper is to show the application of optimization strategies for the cost of beams in reinforced concrete buildings and to propose pre-sizing parameters. In order for these goals to be met, an optimization software program was developed. The program combines the analysis of structures by the grid model, reinforced concrete sizing, and the simulated annealing optimization heuristic. Sizing is compliant with the NBR 6118 (2007) Brazilian standard, according to which flexural, shearing, torsion, and web reinforcements and serviceability limit states (deflection and crack width limitation) are checked. Besides the dimensions of the situations mentioned above, the influence the cost of each material (steel, concrete and formwork) has on the overall cost of structures was also determined.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.37 no.1 s.109
• /
• pp.73-81
• /
• 2005

Stockigt sizing test, which is readily affected by individual tester's bias as well as testing conditions in recognizing red coloration, had to be modified to improve its reliability and reproducibility. The novel testing system with the automatic recognizing program of red coloration was developed with the auxiliary equipments including an automatic liquid dispenser and a specimen shifter. The analysis program used a hue value of a droplet image in recognizing a point of time on red coloration instead of RGB values that are not similar to human perception of color. Hue was more sensitive in recognizing the red coloration of a droplet than the other two factors, Saturation and Value. During the test, the program records the time consumed up to a specific hue value of a droplet on a specimen. Differently from the conventional test, the automatic test could obtain a reliable and reproducible sizing degree with a minor error. Furthermore, the Stockigt sizing degree measured by the automatic system showed great correlations with contact angle and Hercules sizing degree. It means that such great correlations will contribute to the development of an integrated measuring system capable of predicting contact angle, surface tension, surface energy and Hercules sizing degree of paper and paperboards through the Stbckigt sizing test. It was meaningful to note that the automatic system for Stbckigt sizing test might be able to used to predict contact angle, Hercules and Cobb sizing degree, based upon the high correlation coefficients.

• Journal of the Korean Society of Combustion
• /
• v.20 no.3
• /
• pp.27-34
• /
• 2015

The objective of the current study is to introduce detailed process for a preliminary combustor design, and to develop a computer code for it. The program includes various empirical and semi-empirical methodologies for diffuser deign, combustor sizing, air distribution, and sub-component design such as primary and secondary zones. Using the developed program, the combustor sizing results are shown from an assumption of simple annual combustor cycle analysis. Two options are employed, 1) pressure loss approach, and 2) velocity assumption approach. Design results show that there are no significant differences in combustor sizing between two design options. Further code improvement is required for performance and emission evaluations of the designed combustor.

• Journal of the Korean Society of Combustion
• /
• v.18 no.3
• /
• pp.54-60
• /
• 2013

This paper shows a general development process for aircraft gas turbine combustors. As a first step for developing the preliminary combustor design program, several combustor sizing methodologies using reference area concepts are reviewed. There are three ways to determine the reference area; 1) combustion efficiency approach, 2) pressure loss approach, 3) velocity assumption approach. The current study shows the comparisons of the calculated results of combustor reference values from the pressure loss and velocity assumption approaches. Further works are required to add iterative steps in the program using more reasonable values of pressure loss and velocities, and to evaluate the sizing results using data for actual combustor performance and sizes.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.6
• /
• pp.923-934
• /
• 2002

The aim of this study is to suggest a Sizing System which has following points:- 1. In order to satisfy children of diverse figure shapes, we developed sizing system for three different figure type. Figure types are categorized into slim, normal, fat type based on the Rohrer Index. 2. For each figure types, we developed size chart using height bust circumference and hip circumference as basic measurements. The size codes are presented as the height-bust circumference or height-hip circumference. The size interval of height is 5cm for all figure types, such as 120,125,130 ‥‥ we developed a size allocation program, which is helpful when a customer doesn't know exact measurement of some body dimension. If a customer input measurements as much as he/she hows, the program allocates the nearest. At the end of the study, the sizing interaction sites were developed to present the results of the study clear.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.18 no.3
• /
• pp.1-8
• /
• 2010

A design study has been performed to obtain configuration and weight of a compound gyroplane. A study of research trends and characteristics was performed to develop the compound gyroplane sizing program. Based on these results, the sizing program has been developed and its suitability has been validated using existing compound gyroplane data. The subject air vehicles was a Challis Heliplane UAV, Carter Coptet, FB-1 Gyrodyne, and Jet Gyrodyne. As results, the program was suitable to size a compound gyroplane at conceptual design phase, because the greatest error rate was less than 10% and the conceptual design allowance error rate is less than 15%.

• Journal of Fashion Business
• /
• v.16 no.4
• /
• pp.137-151
• /
• 2012

This study aims to use the avatar sizing system of the 3D apparel CAD program instead of the existing 3D body scanners, and to commercialize 3D personal avatars. Towards these ends, the study examined a difference between a 3D avatar and actual body was determined to verify the 3D avatar sizing system. For the experiment, three subjects were selected, were measured as they were, and were made to undergo 3D body scanning and photographing. Then, using avatar sizing system on the 3D apparel CAD program, three types of virtual bodies, namely 3D avatars. The 3D avatar and actual body measurements were compared, and 3D avatars and 3D body-scanned shapes were likewise compared. As a result, the three types of actual bodies and their 3D avatars that were created based on the sizing system of the 3D apparel CAD program were overall similar. but, the thin body-YY type and the normal body-A type were different from their avatars. In the case of type B, who had a bulging abdomen, the 3D avatar was bigger than the actual body as measured. Also, in all body shapes, the girths around the chest, waist and abdomen were produced with exaggerated muscular amounts compared to their actual muscular amounts.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.1
• /
• pp.89-95
• /
• 2006

Planning distributed manufacturing logistics is one of main issues in supply chain management. This paper proposes a hybrid heuristic approach for the Multi-Level, multi-item Capacitated Lot Sizing Problem (MLCLSP) in supply chain network. MLCLSP corresponds to a mixed integer programming (MIP) problem. With integer variable solutions determined by heuristic search, this MIP problem becomes linear program (LP). By repeatedly solving the relaxed MIP problems with a heuristic search method in a hybrid manner, this proposed approach allocates finite manufacturing resources fur each distributed facilities and generates feasible production plans. Meta heuristic search algorithm is presented to solve the MIP problems. The experimental test evaluates the computational performance under a variety of problem scenarios.

• Steel and Composite Structures
• /
• v.44 no.5
• /
• pp.603-617
• /
• 2022

Structural design, in general, is developed through trial and error technique which is guided by standards criteria and based on the intuition and experience of the engineer, a context that leads to structural over-dimensioning, with uneconomic solutions. Aiming to find the optimal design, structural optimization methods have been developed to find a balance between cost, structural safety, and material performance. These methods have become a great opportunity in the steel structural engineering domain since they have as their main purpose is weight minimization, a factor directly correlated to the real cost of the structure. Assuming an objective function of minimum weight with stress and displacement constraints provided by Brazilian standards, the present research proposes the sizing optimization and combined approach of sizing and shape optimization, through a software developed to implement the Simulated Annealing metaheuristic algorithm. Therefore, two steel plane frame layouts, each admitting four typical truss geometries, were proposed in order to expose the difference between the optimal solutions. The assessment of the optimal solutions indicates a notable weight reduction, especially in sizing and shape optimization combination, in which the quantity of design variables is increased along with the search space, improving the efficiency of the optimal solutions achieved.