• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.22 no.4
• /
• pp.397-410
• /
• 2000

Skeletal class III had been classified by the position of the maxilla, the mandible, the maxillary alveolus, the mandibular alveolus and vertical development. This morphologic approach is simple and useful for clinical use, but it is insufficient to permit understanding of the pathophysiology of dysmorphoses. The author hypothesizes that there are different patterns of mutual relation of the skeletal components which have contributed pathologic equilibrium of skeletal class III. The purpose of this study are threefold: 1) to classify skeletal class III in subgroups, which can show the architectural characteristics of the deformity, 2) to analyse the craniofacial architecture of each subgroup on etio-pathogenic basis, and 3) to characterize and visualize the pattern as a prototype. Materials used in this study were lateral cephalograms of 106 skeletal class III adults, which were analysed with modified Delaire's architectural and structural analysis. Linear and angular measurements of the individual subject were obtained and cluster analysis was used for the subgrouping. Data were evaluated for verification of the statistical significances. The following results were obtained. 1. By the modified Delaire's architectural and structural analysis and cluster analysis, skeletal class III adults were classified into 7 clusters and presented as prototypes, which could show the pathophysiology of the skeletal architecture 2. There was significant relationship in measurement variables of each cluster, which could reflect characteristics of the skeletal pattern of growth. 3. The flexure of cranial base had a close relationship to the anterior rotational growth of the maxilla and contributes to understand the etio-pathology of skeletal class III. 4. The proportion of craniospinal area in cranial depth, craniocervical angle and vertical position of point Om had a close relationship to rotational growth of the mandible and direction of condylar growth. They contribute to understand the etio-pathology of skeletal class III. In summary, the cranium and the craniocervical area must be considered in diagnosis and treatment planning of dentofacial deformity. And the occlusal plane can be considered as a representative which shows the mutual relationships of the skeletal components.

• Korean Journal of Cleft Lip And Palate
• /
• v.6 no.2
• /
• pp.59-67
• /
• 2003

A cephalometric study was performed to reveal differences between skeletal Class III malocclusion patients and cleft lip and palate patients, The material for this study consisted of 16 males (mean age 19.8, range 17-29) and 9 females(mean age 19.4, range 16-27) with cleft lip and palate, and 222 Skeletal Class III malocclusion patients(males 106, females 116), Cephalometric tracing and measurements were done by one investigator. Results were followed: 1. Cleft lip and palate group had more retrusive maxilla than the skeletal Class III malocclusion group. 2, Cleft lip and palate group had smaller effective maxillary and mandibular length than skeletal Class III malocclusion group, and the difference was more prominent in the mandible than in the maxilla. 3. Dental compensation was not observed in the upper incisors of cleft lip and palate group and in the lower incisors it was smaller than skeletal Class III group. 4, In the Gonial angle and lower anterior facial height values, there was no significant difference between cleft lip and palate and skeletal Class III malocclusion group. These results can be used in orthodontic treatment planning and orthognathic surgery for the cleft lip and palate patients.

• The korean journal of orthodontics
• /
• v.27 no.2
• /
• pp.209-219
• /
• 1997

This investigation was designed to analyze the degree of dental compensation according to horizontal components of craniofacial skeleton and to investigate correlation between dental compensation and craniofacial pattern in skeletal class III malocclusion. The material selected for this study consisted of standard lateral cephalogram of 59 subjects in normal occlusion group, 91 subjects in mild skeletal class III malocclusion group and 58 subjects in severe skeletal class III malocclusion group. The mild skeletal class III malocclusion group was divided into two groups, one was class III malocclusion without anterior crossbite group and the other was class III malocclusion with anterior crossbite group. The data were analyzed by Quick-ceph image program. The results were as follows. 1. Mild skeletal class III malocclusion without anterior crossbite group showed the most labial inclination of upper incisors, followed by severe skeletal class III malocclusion group and mild skeletal class III malocclusion with anterior crossbite group, the Latter showing the least. The amount of lingual inclination of lower incisors was the largest in severe skeletal class III malocclusion group, and there was no statistically significant difference between mild skeletal claw III malocclusion without anterior crossbite group and mild skeletal class III malocclusion with anterior crossbite group. 2. There were little differences in vertical skeletal structure between mild skeletal class III malocclusion without anterior crossbite group and mild skeletal class III malocclusion with anterior cwssbite group, they showed statistically significant differences in the upper incisors measurements. 3. The measurements of lower incisors in mild skeletal class III malocclusion without anterior crossbite group and upper incisors in mild skeletal class III malocclusion with anterior crossbite group represented a high correlation with skeletal structure. Especially, ∠IMPA and ∠FMIA of lower incisor measurements, and ∠U1-FH ∠U1-SN of upper incisor measurements showed high correlation with skeletal structure in each group. 4. ∠IMPA and ∠FMIA of lower incisor measurements showed high correlation with skeletal structure in all groups. ∠U1-FH, ∠U1-SN and U1-facial plane(mm) of upper incisor measurements represented higher correlation with skeletal structure than any other upper incisor measurements.

• The korean journal of orthodontics
• /
• v.20 no.1
• /
• pp.123-133
• /
• 1990

The work was undertaken to evaluate the calcification of the second and the third molars in skeletal Class II and III malocclusions. The differences in the calcification stages between skeletal Class II and III malocclusion were evaluated and statistically analysed from panoramic radiographs of 202 males and females ranging in age from 11 to 15 years old. The results were as follows, 1. The calcification stages of the second and the third molars were not different between the skeletal Class II and III malocclusions in each age groups of both sexes. 2. The calcification stages of lower second and third molars of the skeletal Class III malocclusion are more advanced than those of the skeletal Class II malocclusion in male. 3. The clacification stages of upper second and third molars are more advanced than those of lower second and third molars in skeletal Class II malocclusion. 4. The calcification stages of lower second and third molars are more advanced than those of upper second and third molars in skeletal Class III malocclusion.

• The korean journal of orthodontics
• /
• v.20 no.1
• /
• pp.111-122
• /
• 1990

To investigate the relationship of skeletal maturity among the normal occlusion group and each malocclusion groups, the author used hand and wrist X-ray of 133 Korean 13 year old boys (normal occlusion 30, Class I malocclusion 35, Class II malocclusion 35 and Class III malocclusion 33) and assessed their skeletal maturity. In this study, fourteen skeletal maturity stages were selected from; Radius, Hamate, Pisiform, Ulnar sesamoid of the metacarpophalangeal joint of the first thumb, proximal phalanges of the first, second and third finger, middle and distal phalanx of the third finger. The difference of skeletal maturity of each malocclusion groups in relative to normal occlusion group and that of each malocclusion groups were analyzed. The findings of this study can be summerized as follows: 1. Average skeletal maturity stage of each groups were MP3cap stage in normal occlusion group, H-2 stage in Class I malocclusion group, midstage between S and H-2 stage in Class II malocclusion group, MP3cap stage in Class III malocclusion group. 2. There was no significant difference in skeletal maturity of Class I malocclusion and Class III malocclusion groups in relative to normal occlusion group. 3. There was significant retardation of skeletal maturity in Class II malocclusion group in relative to normal occlusion group. 4. There was no significant difference in skeletal maturity between Class I and Class II malocclusion groups. 5. There was no significant difference in skeletal maturity between Class I and Class III malocclusion groups. 6. There was significant retardation of skeletal maturity in Class II malocclusion group in relative to Class III malocclusion group.

• The korean journal of orthodontics
• /
• v.29 no.3 s.74
• /
• pp.317-325
• /
• 1999

In proper diagnosis of skeletal Class III malocclusion, it was important to know the pattern of three dimensional skeletal & facial disharmony. The purpose of this study was to obtain P-A cephalometric characteristics in skeletal Class III malocclusion comparing with normal occlusion. The samples were consisted of 120 subjects, divided into four groups : Male normal occlusion, Female normal occlusion, Male skeletal Class III malocclusion, Female skeletal Class III malocclusion. Posteroanterior and lateral cephalogram were taken from the subjects with a x-ray apparatus (ASHAI CX90SP, Japan) and traced on acetate paper with routine manner. The transverse and vertical values from posteroanterior cephalometry, the sagittal values from lateral cephalometry and their ratio were obtained. The results were as follows: 1. The anteroposterior discrepancy in skeletal Class III group was not due to short maxillary length(Cd-A), but to longer mandibular length(Cd-Gn) than normal occlusion group. 2. The faces of skeletal Class III group were longer than normal occlusion group. It was not due to increase of upper face height(Cg-ANS) but to increase of the lower face height(ANS-Me) especially mandibular height(Cd-Me). 3. There was no difference in the facial width values between normal occlusion group and skeletal Class III group, except upper molar width(U6-U6), lower molar width(L6-L6) and mandibular width(Ag-Ag) of female skeletal Class III group which were larger than normal occlusion group. 4. The increase of mandibular length of skeletal Class III group was reflected in the increase of lower facial height but did not have an effect on the mandibular width.

• Imaging Science in Dentistry
• /
• v.33 no.2
• /
• pp.85-90
• /
• 2003

Purpose : To investigate the differences between the position of the mandibular condyles in temporomandibular joints of patients presenting with normal occlusion and skeletal class III malocclusion. Materials and Methods: Forty-two subjects with normal occlusion and thirty-seven subjects exhibiting skeletal class III malocclusion prior to orthodontic treatment were included in the study. Transcranial radiographs of each subject were taken at centric occlusion and 1 inch mouth opening. The positional relationship between the mandibular condyles with articular fossae and articular eminences at two positional states were evaluated and analyzed statistically. Results: The mandibular condyles of the skeletal class III malocclusion group were found to be located more anteriorly from the center of the articular fossae compared to the normal occlusion group in centric occlusion. The mandibular condyles of the skeletal Class III malocclusion group were located more superiorly from the middle of articular height than those of the normal occlusion group in centric occlusion. However, these differences were not statistically significant. At 1 inch mouth opening, the mandibular condyles of the skeletal class III malocclusion group were placed more posteriorly from the articular eminences than those of the normal occlusion group. The mean angle of the articular eminence posterior slope were 56.51 ° ± 6.29° in the normal occlusion group and 60.37° ± 6.26° in the skeletal Class III malocclusion group. Conclusions: The mandibular condyles of the skeletal Class III malocclusion group were placed more anteriorly at centric occlusion and more posteriorly at 1 inch mouth opening when compared with those of the normal occlusion group.

• The korean journal of orthodontics
• /
• v.11 no.2
• /
• pp.101-108
• /
• 1981

This investigation was designed to compare the calcification degree of maxillary second permanent molar to mandibular second permanent molar in skeletal Class III Malocclusion. The material selected for this study consisted in standand lateral cephalogram study model and orthopantomogram of two hundred fifty seven Korean Children, one hundred twenty one boys and one hundred twenty four girls, aged 6 through 12 years, having skeletal Class III Malocclusion. On the basis of findigs of this study, the following results were obtained 1. In the stage of completion of crown, there was no significant difference in calcification degree between maxillary second molar and mandibular second molar of both boys and girls in skeletal Class III Malocclusion. 2. From 8 years of age at the stage of beginning root formation to 12 years of age, the calcification degree of mandibular second molar was more advanced than Maxillary second molar of both boys and girls in skeletal Class III Malocclusion.

• The korean journal of orthodontics
• /
• v.15 no.1
• /
• pp.149-153
• /
• 1985

The purpose of this study was to pursue the morphology and position of mandibular symphysis and the positioning of lower incisors in 36 male and female adults with severe skeletal Class III malocclusion indicated for surgical orthodontic treatment. The following results were obtained. 1. Skeletal Class III malocclusion samples had thinner labio-lingual depth and more lingual inclination of mandibular symphysis than that of normal occlusion in both sexes. 2. Male and female with the skeletal Class III malocclusion showed marked lingual tipping of lower incisors. 3. In skeletal Class III malocclusion samples, lingual basal bone was thinner than that of normal occlusion in both sexes.

• The korean journal of orthodontics
• /
• v.48 no.6
• /
• pp.349-356
• /
• 2018

Objective: This study was performed to investigate the alveolar bone of lower incisors in skeletal Class III adults of different vertical facial patterns and to compare it with that of Class I adults using cone-beam computed tomography (CBCT) images. Methods: CBCT images of 90 skeletal Class III and 29 Class I patients were evaluated. Class III subjects were divided by mandibular plane angle: high (SN-MP > $38.0^{\circ}$), normal ($30.0^{\circ}$ < SN-MP < $37.0^{\circ}$), and low (SN-MP < $28.0^{\circ}$) groups. Buccolingual alveolar bone thickness was measured using CBCT images of mandibular incisors at alveolar crest and 3, 6, and 9 mm apical levels. Linear mixed model, Bonferroni post-hoc test, and Pearson correlation analysis were used for statistical significance. Results: Buccolingual alveolar bone in Class III high, normal and low angle subjects was not significantly different at alveolar crest and 3 mm apical level while lingual bone was thicker at 6 and 9 mm apical levels than on buccal side. Class III high angle group had thinner alveolar bone at all levels except at buccal alveolar crest and 9 mm apical level on lingual side compared to the Class I group. Class III high angle group showed thinner alveolar bone than the Class III normal or low angle groups in most regions. Mandibular plane angle showed negative correlations with mandibular anterior alveolar bone thickness. Conclusions: Skeletal Class III subjects with high mandibular plane angles showed thinner mandibular alveolar bone in most areas compared to normal or low angle subjects. Mandibular plane angle was negatively correlated with buccolingual alveolar bone thickness.