• The korean journal of orthodontics
• /
• v.27 no.5 s.64
• /
• pp.801-813
• /
• 1997

A comparative study was made on the chewing movements of normal occlusion and skeletal class m malocclusion. Thirty normal occlusion subjects and twenty skeletal class III malocclusion patients were given chewing gums for the study : using BioPAK system, the chewing movement on the frontal plane was recorded and analyzed. With a typical chewing path chosen representing each subject, chewing width, opening distance, opening and closing angles, maximum opening and closing velocities were observed. Seven characteristic patterns were classified based on the types of chewing paths. The followings are the results : 1. Compared with the normal occlusion group, the skeletal class III malocclusion group showed more varied and vertical chewing patterns. 2. In comparision of chewing widths, skeletal class m malocclusion group showed narrower path than the normal occlusion group(p<0.01). 3. In opening distance, skeletal class III malocclusion group appeared shorter than the normal occlusion group without statistical significance(p>0.05). 4. In opening and closing angles, skeletal class III malocclusion group showed more acute angles than the normal occlusion group(p<0.01). 5. In maximum opening and closing velocities, skeletal class III malocclusion group was slower than the normal occlusion group but with no statistical significance(P>0.05). 6. In the classification of chewing movement pattern, the normal occlusion group had Type II as the highest rate at 73.4% ; in skeletal class III malocclusion group, the highest rate was Type III at 35.0%, followed by Type II at 30.0% 7. In the classification of chewing movement pattern, Type IV(chopping type)of skeletal class III malocclusion group showed a higher rate with 25.0% over 3.3% of normal occlusion group.

• The korean journal of orthodontics
• /
• v.52 no.6
• /
• pp.432-438
• /
• 2022

Objective: To compare crown-root angulations of the permanent maxillary anterior teeth in skeletal Class I, Class II, and Class III Korean malocclusion patients using cone-bean computed tomography (CBCT) images. Methods: Sixty CBCT images were collected from orthodontic patients archive based on skeletal Class I (0˚< A point-nasion-B point angle [ANB] < 4˚), Class II (ANB ≥ 4˚), and Class III (ANB ≤ 0˚) to have 20 samples in each group. Mesiodistal crown-root angulation (MDCRA) and labiolingual crown-root angulation (LLCRA) were evaluated after orientation of images. Crown-root angulations were compared among Class I, Class II, and Class III groups and among the maxillary anterior teeth in each group. Results: LLCRAs of the maxillary central incisor and the lateral incisor were significantly lower in Class III group than those in Class I group. However, those of the canine showed no significant differences among groups. MDCRAs of the maxillary anterior teeth did not significantly differ among groups either. Conclusions: Our results suggest that skeletal Class III malocclusion might affect LLCRA of the maxillary incisors, especially the central incisor.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.32 no.6
• /
• pp.559-565
• /
• 2006

The aim of this study was to evaluate the amount and interrelationship of the soft and hard tissue changes after simultaneous maxillary clockwise rotation and mandibular setback surgery in skeletal class III malocclusion. The sample comprised of 16 adult patients who had anteroposterior skeletal discrepancy. These patients had received presurgical orthodontic treatment and surgical treatment which consisted of Le fort I Osteotomy and bilateral saggital split ramus osteotomy. The presurgical (T1) and postsurgical (T2) lateral cephalograms were evaluated. The computerized statistical analysis was carried out with SPSS/PC program. The results demonstrated a decrease in the vertical dimension in the soft and hard tissue. The nasolabial angle was increased and the mentolabial angle was decreased. The results showed also many statistically significant correlations(p<0.05). The lower lip closely followed the skeletal movement of the B- point in the horizontal plane. The double jaw rotation surgery can afford a good solution to solve the problems of class III malocclusion cases.

• The Journal of the Korean dental association
• /
• v.57 no.6
• /
• pp.344-351
• /
• 2019

Skeletal Class III malocclusion is a relatively common form of malocclusion in Korea. In borderline cases where only mild skeletal discrepancy exists and if worsening of the facial profile is expected as a result of premolar extraction, mandibular full arch distalization with miniscrews is the treatment of choice. The purpose of this study was to investigate the pattern of tooth movement and evaluate the stability of mandibular full arch distalization and to identify correlation between stability and factors such as initial skeletal pattern, dental changes during treatment and alveolar bone in symphysis region using lateral cephalograms.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.23 no.3
• /
• pp.736-745
• /
• 1996

The conventional treatment of skeletal Class III malocclusion has been focused on application of orthopedic force primarily to the mandible. However, In Class III malocclusion with retrograde position or underdevelopment of Maxilla, this approach is not suitable treatment. These patients need an application of orthopedic forces via face-mask to the Maxilla to stimulate its growth and to change the direction of growth. In skeletal Class III patients who were treated by Face-Mask, the following results were obtained. 1. Forward growth of Maxilla was enhanced. 2. Labioversion of upper incisors and linguoversion of lower incisors were observed. 3. Mandible was rotated to clockwise direction and remodeling of B point was observed. 4. Anterior crossbite was corrected by combining of the above results.

• The korean journal of orthodontics
• /
• v.33 no.1 s.96
• /
• pp.41-49
• /
• 2003

This study examined the relations between degree of posterior dental compensation and skeletal discrepancy in Class III malocclusion. The pretreatment lateral cephalogras and dental casts of 87 skeletal Class III adults were selected to provide a random sampling of skeletal Class III malocclusion. Skeletal discrepancy was described with ANB angle, Wits appraisal, SN-Mn plane angle, FMA and ratios of basal arch width. Degree of posterior dental compensation was described with maxillary intermolar angle, mandibular interolar angle and sum of intermoloar angle. The relationships between skeletal discrepancy and degree of posterior dental compensation were analyzed with simple correlation analysis, stepwise multiple regression analysis. The results were as follows 1. A strong association was found between the variation in the anteroposterior measure, ANB angle and the variation of posterior dental compensation measures, sum of intermolar angle and mandibular intermolar angle in skeletal Class III malocclusion. 2. There was no statistically significant relationship between the variation in the vertical measures and the variation of posterior dental compensation measures in skeletal Class III malocclusion. 3. There was no statistically significant relationship between the variation in the anteroposterior and vortical measures and degree of basal arch width discrepancy.

• The korean journal of orthodontics
• /
• v.38 no.5
• /
• pp.358-370
• /
• 2008

Objective: The purpose of this study was to investigate the horizontal skeletal pattern and dental arch differences between Class III malocclusion patients and normal occlusion patients. Methods: Twenty skeletal Class III malocclusion patients and ten normal occlusion patients were selected and 3D facial CT were taken to analyze the horizontal skeletal differences between the two groups. Results: In the horizontal comparison of the maxilla, skeletal width and perimeter were significantly smaller in skeletal Class III patients on ANS and A point reference planes. The difference between maxillary width of ANS and A point reference planes showed that there was greater constriction of the first and second premolar in skeletal Class III patients. In the horizontal comparison of the mandible, the widths of the canine and premolar area were significantly larger in skeletal Class III patients on B point reference plane. The differences between width of the upper and lower jaws (comparison of A and B reference planes) were significantly large in the canine and premolar area. Conclusions: From this study, the characteristics of Class III malocclusion patients were shown through horizontal constriction of the maxilla. But to make clear further detailed characteristics of Class III malocclusion patients, additional studies are necessary.

• The korean journal of orthodontics
• /
• v.50 no.5
• /
• pp.304-313
• /
• 2020

Objective: The aim of this study was to evaluate the stability of bimaxillary surgery involving bilateral intraoral vertical ramus osteotomy performed with or without presurgical miniscrew-assisted rapid palatal expansion (MARPE) in adult patients with skeletal Class III malocclusion. Methods: A total of 40 adult patients with skeletal Class III malocclusion were retrospectively divided into two groups (n = 20 each) according to the use of MARPE for the correction of transverse maxillomandibular discrepancy during presurgical orthodontic treatment. Serial lateral cephalograms and dental casts were analyzed until 6 months after surgery. Results: Before presurgical orthodontic treatment, there was no significant differences in terms of sex and age between groups. However, the difference of approximately 3.1 mm in the maxillomandibular intermolar width was statistically significant (p < 0.001). Two days after surgery, the mandible had moved backward and upward without any significant intergroup difference. Six months after surgery, the maxillary intercanine (2.7 ± 2.1 mm), interpremolar (3.6 ± 2.4 mm), and intermolar (2.0 ± 1.3 mm) arch widths were significantly increased (p < 0.001) relative to the values before presurgical orthodontic treatment in the MARPE group; these widths were maintained or decreased in the control group. However, there was no significant difference in surgical changes and the postsurgical stability between the two groups. No significant correlations existed between the amount of maxillary expansion and postsurgical mandibular movement. Conclusions: MARPE is useful for stable and nonsurgical expansion of the maxilla in adult patients with skeletal Class III malocclusion who are scheduled for bimaxillary surgery.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.27 no.5
• /
• pp.397-403
• /
• 2001

Purpose: The purpose of this study was to evaluate the postoperative stability of LeFort I osteotomy in two-jaw surgery of skeletal class III malocclusion and to help the establishment of treatment planning in patients with a skeletal class III malocclusion in the future. Materials and Methods: The lateral cephalograms of 14 patients who had been underwent two-jaw surgery via one-piece LeFort I osteotomy were traced and the landmarks were identified. Repeated tracings and construction of reference planes were done. Comparisons were made from the immediate postoperative to late postoperative results of each landmarks on the horizontal and vertical directions. Conclusions: 1. The horizontal changes of landmark ANS, point A, PNS and Mx6Rt between immediate postoperative to late postoperative data were statistically insignificant(p>0.05). 2. The vertical changes of landmark ANS, point A, PNS, Mx6Cr and Mx6Rt between immediate postoperative to late postoperative data were statistically insignificant(p>0.05). 3. The horizontal change of landmark Mx6Cr between immediate postoperative to late postoperative data was statistically significant(p<0.05). 4. Results showed that it was stable that one-piece LeFort I osteotomy in two-jaw surgery of skeletal class III malocclusion.

• The korean journal of orthodontics
• /
• v.26 no.3
• /
• pp.247-254
• /
• 1996

This study was performed to evaluate the hyoid bone position and airway in skeletal class III malocclusion and to prove the correlation between airway, hyoid bone position and mandibular position. The sample, considered of 47 class III malocclusion patients for experimmtal group and 52 class I malocclusion students for control group. Twenty three linear and angular measurements about hyoid bone position, airway size, mandibular position were taken from the lateral cephalograms. The differences between skeletal class III malocclusion group and normal occlusion group were compared and the correlation were evaluated statistically. The results obtained were as follows, 1. There were significant difference in S-APH, A-APH, N-APH, LAH-PBR, AA-PNS, PNS-ad between class I and class III malocclusion groups. 2. The hyoid bone was more anteriorly positioned in class III malocclusion group than class I malocclusion group and skeletal airway size in class III malocclusion group was smaller than class I malocclusion group. 3. There were significant difference in several measurements especially vertical and angular measurements of hyoid bone position and airway size between male and female. Usually the measurements in male were larger than female. 4. There were no significant correlation between hyoid bone position and airway size also airway size, and didn't showe significant correlation with mandibular position, 5. S-APH showed negative correlation with Wits appraisal and A-APH, N-APH showed positive correlation with Wits appraisal. On the contrary vertical measurements of hyoid bone position showed positive correlation with lower facial height.