• Journal of international Conference on Electrical Machines and Systems
• /
• 제3권4호
• /
• pp.362-366
• /
• 2014

In recent years, a permanent magnet linear synchronous motor (PMLSM) has been used in various kinds of transportation applications for its relative high power density and efficiency. The general transportation system arranges the armature on the full length of transportation lines. However, when this method is applied to long distance transportation system, it causes increase of material cost and manufacturing time. Thus, in order to resolve this problem, we suggested stationary discontinuous armature PMLSM. However, the stationary discontinuous armature PMLSM contains the edges which always exist as a result of the discontinuous arrangement of the armature. These edges become a problem because the cogging force that they exert bad influences the controllability of the motor. Therefore, in this paper we proposed the combination of skewed magnets and stair shape auxiliary teeth to reduce the force by edge effect. Moreover, we analyzed the influence of the design factors by using a 3-D finite element method (FEM) simulation tool.

• 한국전자통신학회논문지
• /
• 제9권2호
• /
• pp.243-248
• /
• 2014

영구자석 선형 동기 전동기는 회전기기에 비해 구조적으로 간단하여 보수 점검이 용이하고 정밀, 고속, 고추력화 등의 많은 장점을 가지고 있다. 하지만 반송경로 전장에 전기자를 설치해야 하는 구조적 특성으로 인해 반송경로가 길어지면 길어질수록 초기 설치비용이 상승하게 된다. 이러한 문제점을 해결하기 위해 전기자를 분산시켜 배치하는 방식을 제시하였으나 전기자를 분산시켜 배치할 경우 전기자 양 끝단에는 구조상 반드시 단부가 존재하게 되며 이러한 단부는 추력 맥동을 야기하는 코깅력을 크게 발생시켜 기기의 소음과 진동 및 기기의 성능 저하의 원인이 된다. 따라서 본 연구에서는 기기의 운전특성을 향상시키기 위해 전기자의 스큐에 따른 단부특성을 3D FEM 수치해석을 이용하여 파악하고 단부 코깅력을 가장 저감시키는 전기자 스큐를 제안하고자 한다.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권3호
• /
• pp.138-144
• /
• 2000

The detent force caused by the interaction of magnets with the teeth of a armature core deteriorates the driving performance of a permanent magnet linear synchronous motor. In this paper, we analyze the fields and forces of a linear synchronous motor with segmented or skewed magnet arrangement according to lateral overhang length of permanent magnets. For the analysis, the 3-dimensional equivalent magnetic circuit network method is used. The detent force and the static thrust are analyzed according to the segmented or skewed angle and the overhang length of permanent magnets, and the optimal angles that the detent force is minimized are found out in each case. The analysis results are compared with the experimental ones and shown a reasonable agreement.