• 대한기계학회논문집
• /
• 제6권4호
• /
• pp.315-322
• /
• 1982

The slab analogy method was introduced in the 1920's for the first time as a new experimental stress analysis method. Notwithstanding its theoretical propriety, this method has not been recognized as efficient one because of its difficulty in practical measurement of the slab curvature. In this paper, aiming at experimental determination of two-dimensional stress intensity factors(S. I. F) of arbitrarily shaped cracks which had been regarded as almost impossible by conventional method, the slab analogy was reevaluated. Measuring of slab curvature was replaced by three simple measuring factors to overcome vital slab-analogy's shortcoming by joint use of the shadow-moire method. A determination formula was also derived from the theory of fracture mechanics. By this newly exploited method, it was found that the slab analogy still has its great advantage in determination of S.I.F. of arbitrarily shaped cracks with considerable accuracy compared with existent experimental methods.

• 대한기계학회논문집
• /
• 제17권12호
• /
• pp.3105-3114
• /
• 1993

previously, several basic studies in the experimental analysis of stress intensity factors of cracks by slab analogy have been presented by authors. But, for the application of above mentioned method to the analysis of the arbitrarily distributed cracks, there still is several bottlenecks to be overcome in terms of its experimental process and data treatment. Moreover, authors recently proposed an improved experimental method to use the fixed slab analogy device which has promised more accurate measurement of S.I.F. of small cracks. In this paper, for the completion of slab analogy analysis of distributed cracks, a grating imaginary rotation method is introduced. And, to prove its validity, this combined method is applied to the determination of stress intensity factors of theoretically known distributed cracks. The results show good agreement with the existing theoretical solutions and physical crack propagation tendencies.

• 대한기계학회논문집
• /
• 제16권11호
• /
• pp.1999-2010
• /
• 1992

본 연구에서는 (1)의 방법의 문제점.즉, 두꺼운 판에 강체 균열을 열매립하는 과정에서 균열 첨단에 열변형이 일어나, 변위측정시 측정 오차가 발생하는 점을 해결 하기 위해, 매유 얇은 P.V.C.판(t=0.15mm)에 강체 균열을 열매립 하는 대신 접착제로 부착하는 방법을 채택하여 강체균열 경계상의 곡률 영향을 검토하였으며, (2)의 방법 의 해결책으로서, 강체균열에서 충분히 먼곳의 곡률은 얇은 합금공구강판(alloy tool steel plate`t=1mm)으로 제작한 프레임(Frame)으로 원방곡률을 미리 슬랩 경계조건과 일치하도록 하였고, 또한 변위도 고정(동결)할수있는 새로운 고정 하중장치를 개발하 여 실험 측정치의 정도를 높였다.

• 대한기계학회논문집
• /
• 제12권6호
• /
• pp.1246-1251
• /
• 1988

본 연구에서는 균열 첨단의 극좌표를 직각좌표(x, y)로 변환시킨 후 슬랩상사 이론을 적용시켜 균열첨단 부근에서 많은 데이터의 측정이 가능한 새로운 해석법인 다 점 선정법(multi-point selection method)을 개발하였다.또 이 해석법으로 유한판 중앙 직선균열의 응력확대계수를 해석하여 종래 해석법의 결과와 비교 검토하여 그 유 용성을 확인하였다.

• 대한기계학회논문집
• /
• 제14권5호
• /
• pp.1079-1086
• /
• 1990

본 연구에서는 모아레 경사격자법(moire tilted master grating method)을 개 발하여 그 유용성을 확인하고 이를 굴절 및 편심균열의 응력확대계수의 해석에 확대 적용하여 다점선정법의 적용범위를 넓히고, 또 분포균열 및 임의 형균열의 해석 가능 성을 타진하여 완성된 실험법으로서의 위치를 구축하는데 목적이 있다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
• /
• pp.577-578
• /
• 2009

For cases where the column concrete strength exceeds 1.4 times the slab concrete strength, the KCI Code requires that either: puddled high-strength concrete(HSC) be used in the slab, or the use of vertical dowels and spirals through the joint, or the use of an effective concrete strength in the joint. This paper studies on the third strategy. A prediction model of the effective concrete strength for interior columns was proposed using an analogy of brick and mortar in brick masonry. The proposed prediction model is verified by comparison with experimental results and various design equations.

• Structural Engineering and Mechanics
• /
• 제8권1호
• /
• pp.85-102
• /
• 1999

With the advent of computer, the finite element method has become a most powerful numerical method for structural analysis. However, bridge designers are reluctant to use it in their designs because of its complex nature and its being time consuming in the preparation of the input data and analyzing the results. This paper describes the development of a computer based finite element model using the idea of eccentric beam elements for the analysis of slab-on-girder bridges. The proposed method is supported by a laboratory test using a reinforced concrete bridge model. Other bridge analytical schemes are also introduced and compared with the proposed method. The main aim of the comparison is to prove the effectiveness of the shell and eccentric beam modelling in the studies of lateral load distribution of slab-on-girder bridges. It is concluded that the proposed finite element method gives a closer to real idealization and its developed computer program, SHECAN, is also very simple to use. It is highly recommended to use it as an analytical tool for the design of slab-on-girder bridges.

• 대한기계학회논문집
• /
• 제7권4호
• /
• pp.434-440
• /
• 1983

For the determination of stress intensity factors, three methods have been used conventionally; the photoelastic method, the compliance method and the electrical resistance method. These methods, however, have common short coming upon experimental performance; the difficulty of cutting out sharp crack tips and arbitray crack forms similar to the practical one on the specimen. to eliminate this flaw, one of the author previously presented new methods, that is, for the determination of $K_{III}$ mode, the membrane analogy was applied and the slab analogy was used for the determination of $K_{I}$ and $K_{II}$ . The validity of this method was proved through the performance of a series of experiments of which theoretical solution are known.n.n.

• 한국구조물진단유지관리공학회 논문집
• /
• 제19권3호
• /
• pp.122-129
• /
• 2015

본 연구에서는 일반강도 슬래브가 기둥 사이로 지나가는 형태의 모서리 기둥에 대한 유효압축강도 예측식을 개발하고자 하였다. 예측식 개발을 위해서 고강도 기둥-일반강도 슬래브 접합부와 조적조 구조의 유사성을 이용하였으며, 이에 더하여 기둥 단면치수에 대한 슬래브 두께의 형상비를 고려하였다. 제안된 식에 의한 예측값과 실험값의 비교를 통해 신뢰도를 확인하였으며, 설계기준 및 타 연구자들에 의한 제안식과 비교를 통해 우수성을 검증하였다. 연구결과, 제안식은 예측치에 대한 실험값의 비가 평균 1.02, 표준편차 0.15를 보여 콘크리트 구조기준 (2012)을 포함한 타 유효압축강도 예측식들에 비해 정확도 및 일관성 모두 우수한 결과를 나타냈다.

• Steel and Composite Structures
• /
• 제31권1호
• /
• pp.27-41
• /
• 2019

Shear lag effect can be an important phenomenon to consider in design of the steel-concrete composite beams. Researchers have found that the effect can be strongly related with the moment distribution, the stiffness and the ductility of the composite beams. For continuous composite beams expected to sustain hogging moment, the shear lag effect can be more distinct as cracking of the concrete slab reduces its shear stiffness. Despite its influences on behaviour of the steel-concrete composite beams, a method for calculating the shear lag effect in steel-concrete composite beams sustaining hogging moment is still not available. Shear lag effect in steel-concrete composite beams sustaining hogging moment is investigated in this paper. A method was proposed specifically for predicting the effect in the cracked part of the steel-concrete composite beam. The method is validated against available experimental data. At last, FE studies are conducted for steel-concrete composite beams with different design parameters, loading conditions and boundary conditions to further investigate the shear lag effect and compare with the proposed method.