• 제목/요약/키워드: Slab joint

검색결과 222건 처리시간 0.027초

복층터널 중간슬래브 유지관리에 따른 응력분포 특성 분석 (Characteristics of Middle Slab Stresses in Double-Deck Tunnel During Maintenance)

  • 조영교;이영훈;박범근;김성민
    • 한국도로학회논문집
    • /
    • 제19권6호
    • /
    • pp.47-56
    • /
    • 2017
  • PURPOSES : The purpose of this study is to investigate the stresses of the middle slab in a double-deck tunnel owing to the slab lift to replace the underlying elastic pads during maintenance work. METHODS : The middle slab was divided into three different sections: typical section, expansion joint section, and emergency passageway section. Finite element analysis models of these three sections of middle slab were developed, and the stress distribution and maximum stresses were obtained using the models when the middle slab was lifted to replace the underlying elastic pads. Various slab lifting methods were examined in this study such as one-, two-, and multiple-point lifts, distributed lifts, and one or both slab side edge lifts. RESULTS : When the slab side edge is lifted, the longitudinal stresses of the slab are almost the same as the principal stresses. This implies that the governing stresses are the longitudinal stresses. The maximum stresses with both-edge lifts are generally smaller than those with one-edge lifts at all three sections of middle slab. CONCLUSIONS : If the middle slab in a double-deck tunnel is lifted for maintenance, the slab should be lifted at multiple points along the longitudinal direction to reduce the tensile stresses.

슬래브확장을 위한 접합부의 전단성능에 관한 연구 (A Study on the Shear performance of Joints for slab extension)

  • 유한국;박태원;정란;이상현
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
    • /
    • pp.109-110
    • /
    • 2009
  • 본 연구는 리모델링을 통한 슬래브 확장 시, 기존슬래브와 신설슬래브의 접합부에 작용하는 전단성능을 알아보았다. 실험체의 변수는 강관콧타, 전단철근, H형강, 스터드볼트, 원형전단키로 설정하였으며, 이에 따른 실험체를 제작하고 실험을 수행할 예정이다. 실험의 결과, 충분한 전단강도를 보인다면 이를 접합부설계의 기초자료로 활용하도록 한다.

  • PDF

슬래브 형식 프리캐스트 모듈러교량의 종방향 연결부 형상 결정에 관한 연구 (Study on the Shape of a Longitudinal Joint of the Slab-type Precast Modular Bridges)

  • 이상윤;송재준;김형열;이영호;이정미
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제16권5호
    • /
    • pp.98-111
    • /
    • 2012
  • 본 연구에서는 급속시공을 위한 단지간의 슬래브 형식의 프리캐스트 모듈러교량의 종방향 연결부 상세를 제안하고자 한다. 슬래브 형식의 프리캐스트 모듈러교량은 횡방향으로 분절되어 제작되므로, 분절된 프리캐스트 모듈 사이에는 종방향의 연결부가 형성된다. 이에, 종방향 연결부의 형상과 제원을 결정하기 위해 전단키 개수, 폭, 높이, 경사각, 연결부 폭을 변수로 선정하여 해석적 연구와 실험적 연구를 함께 수행하였다. 결과 분석을 위해서 연결부에 초기 균열이 발생하는 균열하중에 대한 경향을 검토하였으며, 종방향 연결부의 효율성을 평가하기 위해 효율계수(efficiency factor)를 제안하였다. 해석 및 실험에서 얻어진 균열하중과 본 연구에서 제안된 효율계수를 이용하여 연결부의 형상 및 제원을 결정하였다.

수평으로 경사진 박스암거 위 콘크리트 포장 슬래브의 최적 줄눈위치 (Optimal Joint Position in Concrete Pavement Slab over Skewed Box Culvert)

  • 염우성;정호성;연우;손덕수;이재훈;정진훈
    • 한국도로학회논문집
    • /
    • 제15권5호
    • /
    • pp.47-55
    • /
    • 2013
  • PURPOSES : The purpose of this study is to investigate the optimal joint positions which can minimize distresses of concrete pavement containing box culvert with horizontally skewed angles. METHODS : The concrete pavement containing the box culvert with different skewed angles and soil cover depths was modeled by 3 dimensional finite element method. The contact boundary condition was used between concrete and soil structures in addition to the nonlinear material property of soil in the finite element model. A dynamic analysis was performed by applying the self weight of pavement, negative temperature gradient of slab, and moving vehicle load simultaneously. RESULTS : In case of zero skewed angle ($0^{\circ}$), the maximum tensile stress of slab was the lowest when the joint was positioned directly over side of box culvert. In case there was a skewed angle, the maximum tensile stress of slab was the lowest when the joint passed the intersection between side of the box culvert and longitudinal centerline of slab. The magnitude of the maximum tensile stress converged to a constant value regardless the joint position from 3m of soil cover depth at all of the horizontally skewed angles. CONCLUSIONS : More reasonable and accurate design of the concrete pavement containing the box culvert can be possible based on the research results.

건조수축에 따른 균열 방지를 위한 콘크리트 슬래브의 정량적 줄눈 간격 산정 (Quantitative Estimation of Joint Spacing for Concrete Slab to Prevent Cracking of Drying Shrinkage)

  • 이수진;이회근;이승훈;원종필
    • 콘크리트학회논문집
    • /
    • 제23권3호
    • /
    • pp.289-294
    • /
    • 2011
  • 콘크리트 슬래브의 수축으로 인해 발생하는 응력에 의한 무분별한 균열을 억제하기 위해 줄눈을 설치한다. 그러나 설치된 줄눈의 간격은 구체적인 산출 근거나 정량적인 기준 없이 경험적으로 나누어지고 있다. 따라서 이 연구에서는 콘크리트 슬래브의 수축 응력에 의한 변형량을 측정하고 이에 따른 정량적인 평가 기준을 제시하고자 한다. 노출된 환경 조건은 온도 $15^{\circ}C$, 상대습도 60%를 적용하였다. 건조수축 실험은 현재 슬래브 설계에 많이 사용되는 설계 강도 30 MPa 및 40 MPa 배합을 사용하였고 그 결과를 기존 건조수축 모델에 적용하였다. 그 결과 ACI 209R 모델에 가장 일치하는 것으로 나타났으며 이를 바탕으로 콘크리트 슬래브의 정량적인 줄눈 간격을 산정하였다.

슬림 프리캐스트 슬래브 데크를 사용한 I-슬래브 시스템의 전단 성능에 관한 실험적 연구 (Experimental Study on Shear Capacity of I-slab System Using Slim Precast Slab Deck)

  • 김승훈
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제21권1호
    • /
    • pp.126-133
    • /
    • 2017
  • 본 연구는 원형 천공된 플랫 형태와 팔각형 형태의 중공을 가지는 슬래브의 전단강도를 평가하고 있다. 최근 건축구조물에서 슬래브 두께에 대한 증가와 품질관리에서 요구되는 수준이 상향됨에 따라 프리캐스트 중공 슬래브 시스템에 대한 관심이 증가하고 있다. 중공 슬래브 시스템은 널리 알려진 바와 같이 슬래브의 자중을 감소시킬 수 있는 효율적인 바닥시스템이다. 하지만 중공슬래브는 전단에 저항하는 슬래브 웨브의 콘크리트 면적 감소로 전단강도 성능이 저하될 수 있다. 특히, 프리캐스트 중공슬래브는 PC 슬래브 데크의 접합면이 발생하며, 접합면의 균열로 인한 전단파괴가 일어나지 않도록 방지하여야 한다. 본 연구에서는 I-슬래브 시스템의 전단강도를 평가하기 위하여 3점 가력에 의한 주축 및 직교축에 대한 전단 실험을 실시하였다. 실험결과 I-슬래브가 PC 접합면이 포함되어짐에도 불구하고 이론강도에 대하여 충분한 전단강도 성능을 보유하는 것으로 나타났다.

절곡형 전단보강근을 사용한 슬래브-기둥 접합부의 이력 거동 (Hysteretic Behavior of Slab-Column Joint Using Bended Type Shear Reinforcement)

  • 이현호;이도범;이리형
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제10권3호
    • /
    • pp.211-218
    • /
    • 2006
  • 본 연구에서는 거주형 무량판 구조의 뚫림 전단을 방지하기 위한 연속 절곡된 전단 보강근을 개발하였다. 이를 적용한 슬래브-기둥 접합부에 있어 개발 전단 보강근의 뚫림 전단 성능을 평가하기 위하여, 구조 성능 실험을 수행하였다. 실험 변수는 전단보강근이 없는 경우, 개발 전단보강근을 사용한 경우, 헤드 스터드를 사용한 경우이다. 수평하중에 대한 저항성능을 평가하기 위하여 일정축력하에서의 이력 하중 실험을 수행하였다. 실험결과는 전체 변위 및 접합부 강도 등으로 평가되었다. 이러한 결과로부터, 개발된 전단보강근이 층간변위비 거동에 있어 우수한 성능을 보유함을 확인할 수 있었다.

Cyclic behaviour of concrete encased steel (CES) column-steel beam joints with concrete slabs

  • Chu, Liusheng;Li, Danda;Ma, Xing;Zhao, Jun
    • Steel and Composite Structures
    • /
    • 제29권6호
    • /
    • pp.735-748
    • /
    • 2018
  • In this paper, the cyclic behavior of steel beam-concrete encased steel (CES) column joints was investigated experimentally and numerically. Three frame middle joint samples with varying concrete slab widths were constructed. Anti-symmetrical low-frequency cyclic load was applied at two beam ends to simulate the earthquake action. The failure modes, hysteretic behavior, ultimate load, stiffness degradation, load carrying capacity degradation, displacement ductility and strain response were investigated in details. The three composite joints exhibited excellent seismic performance in experimental tests, showing high load-carrying capacity, good ductility and superior energy dissipation ability. All three joint samples reached their ultimate loads due to shear failure. Numerical results from ABAQUS modelling agreed well with the test results. Finally, the effect of the concrete slab on ultimate load was analyzed through a parametric study on concrete strength, slab thickness, as well as slab width. Numerical simulation showed that slab width and thickness played an important role in the load-carrying capacity of such joints. As a comparison, the influence of concrete grade was not significant.

더블티 슬래브의 연속화 (Continuity for Double Tee Slabs)

  • 유승룡
    • 콘크리트학회논문집
    • /
    • 제13권2호
    • /
    • pp.99-106
    • /
    • 2001
  • 이 연구의 목적은 기존의 단순지지로 더블티 슬래브에 발생하는 과도한 모멘트, 슬래브 깊이, 중앙부 처짐, 단부 균열의 발생 원인을 근원적으로 해결할 연속화된 개량조인트를 개발하는데 그 초점을 두었다. 개량조인트는 다음과 같은 장점을 얻을 수 있다. 먼저, 보중앙 정모멘트의 감소로 인하여 적용하중에 대한 설계스팬을 증가시킬 수 있으며, 슬래브의 처짐을 감소시킬 수 있다. 또한, 기존 더블티공법의 문제점인 더블티와 역티사이의 연결부 균열을 감소시킬 수 있으며, 시공시 부가적인 거푸집을 필요로 하지 않는다. 개선된 더블티의 댑단부와 직사각형보를 연결부 시험체를 활용하여, 길이철근 배근량을 변수로한 정적 3점재하 실험에서 전단력과 모멘트에 대한 거동을 평가하였다. 이 연구의 범위 안에서 다음과 같은 결론을 얻을 수 있다. 개량댑에 의한 연결 부의 연속화는 토핑 콘크리트에 길이 방향 철근을 배근함으로써 효과적으로 구할 수 있으며, 더블티 슬래브의 스팬용량을 증 가시키고 처짐을 일반적으로 감소시킨다. 아울러, 개량댑의 연속화는 단순지지 연결부보다 초기균열에 효과적인 것으로 나타났다.

UHPC 바닥판 증기양생 현장이음부의 최소철근겹침이음길이 (The Minimum Lap-spliced Length of the Reinforcement in the Steam Curing UHPC Bridge Deck Slab Joint)

  • 황훈희;박성용
    • Composites Research
    • /
    • 제26권2호
    • /
    • pp.135-140
    • /
    • 2013
  • 이 연구에서는 이음부가 초고성능콘크리트 교량 바닥판의 정적 거동에 미치는 영향을 실험적으로 규명하고, 이음부 철근의 최소겹침이음길이를 제안하였다. 총 6개의 실험부재를 제작하였으며 4점 휨 실험에 의하여 성능을 평가하였다. 이음부는 UHPC의 높은 부착특성으로 인하여 단순하면서도 매우 효율적인 구조가 될 것으로 기대되는 철근겹침이음을 대상으로 하였다. 실험결과로부터 이음부의 설치에 의한 UHPC의 인장기여도 감소에 따라 약 30% 수준의 휨강도 감소가 발생되는 것으로 측정되었고, 150 mm 이상의 철근겹침이음길이를 확보하면 연속된 철근을 사용한 경우와 거의 유사한 강도와 연성을 확보할 수 있는 것으로 나타났다.