• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.2
• /
• pp.276-285
• /
• 2008

These days the automobile industry, which has rapidly progressed, has been an indispensable part in social and economic activities as well as its research and development have been activated in response to various needs of consumers and markets. The second and third generation control system, getting count on safety and convenience differently than early circuits, cause the hypertrophy of wire harness. The J/Box(Junction Box), which distributes power and wires, was developed to solve the problem. As vehicles have been better in quantity and intelligence, however, environment-friendly electric apparatus system has continuously increased and ITS(Intelligent Transport System) has been introduced in earnest. In result, wires got complicated and multilateral and also there has been a stronger probability that vehicles are out of order due to various problems including mechanical failure. In this study, ISJB(Intelligent Smart Junction Box) was introduced to solve the problem. The diagnosis system was applied to prevent the overload and short of ISJE. Also, the state of vehicles displayed so that drivers monitor it in motion. Likewise error data are saved in the memory so that such data can be analyzed retrospectively. The busbar was adopted in to the main power terminal and the part of power pattern was coverd by lead. Because ISJB is more sensitive to heat in comparison to the busbar type J/Box. With regard the circuits related with safe, alternative circuits were set up in order that electronic devices may be normally operated even when an error arises. ISJB is expected to improve the safety and quality of vehicles.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.3
• /
• pp.82-88
• /
• 2015

This paper presents a design of the enable switch circuit, which is consist of discrete device at smart junction box(SJB) board. The Enable switch circuit, which receives ignition signal (IG) for input, sends a drive signal to linear regulator and other elements. The circuit design is carried out in a BCDMOS $0.18{\mu}m$ technology, and the performances are verified through simulations according to AEC-Q100 and ISO 7637-2. Die area of the designed Enable switch circuit is $1.67mm{\times}0.54mm$ in layout, and it is shown that the die can be housed in $3mm{\times}3mm$ HVSON8 package. The designed enable switch circuit is expected to be widely adopted in various automotive SJB's since it can significantly reduce the overall printed circuit board form factor.